• Korean Journal of Ecology and Environment
• /
• v.39 no.2 s.116
• /
• pp.257-264
• /
• 2006

In order to evaluate the application of Algae Online Analyzer (AOA), an instrument of automatic measurement of chlorophyll a concentration, was tested and compared with the acetone extraction method on the basis of microscopic counting of phytoplankton in field water (Paltang Reservoir). We simultaneously conducted AOA operation and extraction method with the same water sample, to compare both results of chlorophyll a measurement. Phytoplankton were enumerated by inverted microscope with the Sedgwick-Rafter chamber, and classified into the genus or species. According to the AOA measurement, the diatom most (83.6%) strongly contributed to the total chlorophyll a concentration, followed by chlorophyceae> cyanophyceae>cryptophyceae. Overall, the results of both AOA and extraction method showed a similar trend and significant correlation (r=0.87, n=302, p<0.001), however, there were some differences according to the season and species. In particular, the relationship between AOA Chl-a density of the diatom (r=0.73, p=0.010) and cyrptophyceae (.=0.83, p=0.00154) were siginificant, while chlorophyceae (r= -0.13) and cyanophyceae (r= -0.16) showed no clear relationship during the study period. Although we can not fully understand why there was difference between both mothods, AOA application for alarming algal bloom and water quality management during the algal bloom appears to be very relevant. However, the further study or technical upgrade of AOA measurement is required, especially in the case of low density of phytoplankton or species-specific measurement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.679-685
• /
• 2004

Although the electrophoretic deposition method has the advantage of simple processing procedure, less fabrication facilities, and easier control for deposition thickness and wire length, providing economical and technical merits, it also has the disadvantages of cracking and porosity phenomena, requiring an improved processing method for higher particle density and constant particle orientation. we have developed an optimization method to increase the particle density and to unify its orientation, and have performed a study to overcome the cracking and porosity problems in the fabricated superconductor. In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternate voltage vertically has been developed for the first time and applied to the electrophoretic deposition process. The applied alternate electric field caused a force to be exerted on each YBCO particle and resulted in a rotation of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. We name this process as the shaky-aligned electrophoretic deposition method. For commercial utilization and efficiency, in this dissertation, alternating voltage of 60 Hz and 25 ∼ 120 V/cm was proposed to apply it as a subsidiary source for shaky-flow deposition so that the fabricated thin film showed uniform surface morphology with less voids and cracks and Tc,zero of 90 K and the critical current density of 3419 A/$cm^2$.

• Korean journal of applied entomology
• /
• v.15 no.3 s.28
• /
• pp.111-126
• /
• 1976

Regional differences in economic importance of the four species of rice leafhoppers, viz., Laodelphax striatellus, Nephotettix cincticeps, Nilaparvata Iugens and Sogatella furcifera, were analyzed and discussed based on population surveys conducted in Suweon and in southern and south-western coastal areas. The economic importance of L. striatellus and N. cincticeps, which are found throughout the year in Korea, seems to be less in middle regions. This is believed due to effective natural control through severe winter climate, cultural practices in rice and barley growing, and natural enemies such as spiders. However, the economic importance of these two species is significantly greater in southern regions with a less severe winter climate, and where cultural practices in rice and barley favour synchronization between the life cycles of insects and the seasonal succession of host plants. with regard to N. lugens and S. furcifera, which cannot overwinter in Korea, initial populations are the result of long distance migration across the East China Sea. Weather elements related to their migration result in more abundant immigrants of these two species in southern than in middle regions. Thus, different policies are needed for the integrated control of rice leafhoppers in middle and southern Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.61-72
• /
• 2017

Due to the climate change, damages of human life and property caused by natural disaster have recently been increasing consistently. In South Korea, total damage by natural disasters over 20 years from 1994 to 2013 is about 1.0 million dollars. The 13% of total damage caused by heavy snow. This is smaller amount than the damage by heavy rainfall or typhoon, but still could cause severe damage in the society. In this study, the snow damage in Gangwon region was estimated using climate variables (daily maximum snow depth, relative humidity, minimum temperature) and scoio-economic variables (Farm population density, GRDP). Multiple regression analysis with enter method was applied to estimate snow damage. As the results, adjusted R-square is above 0.7 in some sub-regions and shows the good applicability although the extreme values are not predicted well. The developed model might be applied for the prompt disaster response.

• Journal of the Korean Society for information Management
• /
• v.35 no.4
• /
• pp.107-124
• /
• 2018

Mendeley readership data could be used to understand how research outcome be spent outside of academia in multi way. So it could be utilized to understand unknown world which citation rate could not explain still now. This study, by conducting a country network analysis using Mendeley's co readership data about articles of Korea related research, clusters countries that share common academic interest. As a result, the US and other advanced countries in all fields showed high overall and regional centrality, indicating that they have overall cooperation and potential for exchange of Korea related studies. Some developing countries have shown high regional centrality and are linked to common academic interests. In the medical and social sciences, the OECD and developing countries have formed a separate group of readers, and the engineering sector has been characterized by emerging developing countries as a large community of readers. In addition, engineering science field has shown that network density is relatively high, so there might be high possibility of academic exchanges, knowledge dissemination and cooperation among countries.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.43-58
• /
• 2015

The greenhouse gas emission caused by rapid economic growth and population is increasing in Korea. Also, climate change from greenhouse gases emission is accelerated. IPCC(Intergovernmental Panel on Climate Change) report projects an increase of greenhouse gas emissions by 90% from the year 2000 to 2030(SRES, 2000). Within this context, establishing countermeasures on climate adaptation and mitigation is becoming increasingly important to reduce the negative effect of climate change at a global level. Along with global efforts to tackle climate change, Korean government has incorporated 'Low Carbon Green Growth'strategies into its national policy agenda. Local governments have also conducted a number of studies to devise plans for environmentally friendly and sustainable city development. In this paper, the land-use equilibrium model, which reflects economic and geographical characteristics, is used to analyze the change in residential land use and population density. The target area for study is Jeju island in Korea. With an application of land use equilibrium model, it derived three types of scenarios of the land use change: (1) dispersion scenario-reflecting present-day conditions (2) adaptation scenario-applying adaptation measures to climate change and (3) combined scenario-integrating both adaptation and mitigation measures in model to climate change. By applying dispersion to combined scenario, the general trend shows a downward shift in population density. Subsequently, energy consumption and expected cost associated with casualties were calculated on the basis of the findings of respective scenario. The results show a descending trend in energy consumption and expected casualtie. Therefore, understanding for residential land use and population density of each scenario that analyzed land use equilibrium model in the study is expected to devise a environmental city plan for climate change stabilization and climate adaptation and mitigation.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.129-150
• /
• 1985

The present investigation was conducted to provide a systematic approach necessary to establish an integrated insect pest management program of barley in Korea. Some ecological surveys on insect pests of barley have been undertaken at the field of Experimental Station, Ky$\check{o}$ngbuk Provincial Office of Rural Development as a fixed point survey area, and at 23 localities for round survey throughout southern and central Korea from 1983 to 1984. Previously known insects injurious to barley in Korea were revised and the population dynamics of 10 dominant harmful species were analyzed according to either 24 localities or 25 cultivars respectively by using several sampling methods of net sweeping, black light traps, yellow water pan traps and visual counting. As the results, a total of 94 species belonging to 77 genera under 32 families are known to be injurious to barley, among them 20 species are newly added here. In the population density level, the dominant species were disclosed as Laodelphax striatellus (43.1 %), Macrosiphum avenae(27.0 %), Rhopalosiphum padi(6.5 %), R. maidis(5.4 %), Psammolettix strialus(2.7 %), Chlorops oryzae(2.2 %), Agromyza albipennis(2.1 %) Phyllotreta nemorum(1.4 %), Chaetoenema cylindrica(1.0 %), Dolycoris baccarum(1.0 %) in order. For the general abundance of major insect pests, it was highest in the cultivar P'aldal whereas lowest in Milyang #22. There were tendencies that Psammotettix striatus, Dolycoris baccarum, Phyllotreta nemorum and Chaetocnema cylindrica represented a maximum increase in the beginning of June, while Chlorops oryzae and Agromyza albipennis showed in the middle of May but aphids were in the end of May. In the dominance of natural enemies, Nabis stenoferus occupied 21.4 % and Propylaea japonica 9.6 %.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.10
• /
• pp.591-598
• /
• 2017

Power overshoot phenomenon was observed in microbial fuel cells (MFCs) used non-catalyzed graphite felt as cathode. Voltage loss in MFCs was mainly caused by cathode potential loss. Cheap stainless steel scrubber, which has high conductivity, and Pt/C coated graphite felt as cathode were used for overcoming power overshoot and reducing the cathode potential loss in MFCs. The MFCs used stainless steel scrubber showed no power overshoot even slow catholyte flow rate and produced 29% enhanced maximum current density ($23.9A/m^3$) than MFCs used non-catalyzed graphite felt while the power overshoot phenomenon was existed in Pt/C coated MFCs. Increasing catholyte flow rate resulted in disappearing power overshoot of MFCs used non-catalyzed graphite felt. In addition, maximum power density and current density of both MFCs used non-catalyzed graphite felt and stainless steel scrubber increased by 2-3.5 times. Cathode potential losses in all region of activation loss, ohmic loss, and mass transport loss were reduced according to increase of catholyte flow rate. Therefore, stainless steel scrubber has advantages that are economical materials as electrode and prevents power overshoot, leading to enhance electricity generation. In addition, increasing catholyte flux is one of great solution when power overshoot caused by cathodic overpotential is observed in MFCs.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.105.2-105.2
• /
• 2011

화비정질 실리콘의 빛에 의한 노화현상 (light-induced degradation; LID)은 이미 1977년 보고된 Staebler-Wronski 효과에 의해서 확인된 바 있다. 이는 비정질 실리콘이 빛에 노출될 때, 이미 포함되어 있는 수소원자가 빛 에너지에 의해서 이동하게 되고, 이로 인해서 생성 또는 소멸되는 댕글링 본드 때문에 일어난다. 특히, 일상적인 태양광의 노출 하에서 태양전지의 장시간 성능을 예측하는데 물리적인 이해의 부족 및 기술 환경적인 어려움이 있고, 이러한 요인들은 안정된 태양전지를 개발하는데 장해요인으로 나타난다. 그러므로 비정질 실리콘 태양전지가 장시간 태양광에 노출되어 시간이 지남에 따라서 "성능이 어떻게 변하는지?" 그리고 "이에 대한 원인은 무엇인지?" 등은 여전히 과학적으로 풀어야할 숙제로 남아있다. 본 논문에서는 비정질 실리콘으로 구성된 태양전지가 태양광에 노출될 때 시간이 지남에 따라서 (1) 성능이 어떻게 변하는지, (2) LID의 변화는 언제 안정화되는지, 그리고 (3) 성능변화에 대한 원인은 무엇인지에 대해서 논의한다. 본 논문은 장시간 빛에 노출되는 비정질 실리콘 태양전지의 성능예측에 관해서 연구하였다. 결함밀도의 운동학적 모형을 통해서 태양광 노출에 대한 태양전지 성능변화를 예측하는데 초점을 맞추었고, 이를 위해서 태양전지에 조사되는 태양광 세기, 주변온도, 등이 고려되었다. 특히, 전하운반자의 수명이 결함밀도에 의해서 결정되기 때문에 비정질 실리콘 태양전지의 빛에 대한 노화현상 (LID)이 확장지수함수 (stretched-exponential) 완화법칙을 따르는 결함밀도에 의해서 물리적으로 설명된다. 한편 이와 같은 물리적 계산의 유용성을 확인하기 위해서 동일한 태양전지에 대해서 AMPS-1D 컴퓨터 프로그램을 사용하였고, 이를 통해서 비정질 실리콘 태양전지의 빛에 대한 노화현상을 물리적 및 정량적으로 이해하였다. 본 연구에 적용되는 태양전지는 비정질 실리콘으로 구성된 pin 구조 (glass/$SnO_2$/a-SiC:H:B/a-Si:H/a-Si:H:P/ITO)로서 다음과 같은 특성을 갖는다: 에너지 띠간격~1.72 eV, 두께~400 nm, 내부전위~1.05 V, 초기 fill factor~0.71, 초기 단락전류~16.4 mA/$cm^2$, 초기 개방전압 0.90 V, 초기 변환효율 10.6 %. 우리는 이와 같은 연구를 통해서 과학적으로 비정질 실리콘의 빛에 의한 노화현상을 이해하고, 기술적으로 효율 및 경제성이 높은 태양전지의 개발에 도전한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.1-6
• /
• 2020

UAV (Unmanned Aerial Vehicles) are used widely for military purposes because they are more economical than general manned aircraft and satellites, and have easy access to the object. Recently, owing to the development of IT technology, UAV equipped with various sensors have been released, and their use is increasing in a wide range of fields, such as surveying, agriculture, meteorological observation, communication, broadcasting, and sports. An increasing number of studies and attempts have made use of it. On the other hand, existing research was related mostly to photogrammetry, but there has been a lack of analytical research on LiDAR (Light Detection And Ranging). Therefore, this study examined the characteristics of a UAV LiDAR sensor for the application of a geospatial information field. In this study, the performance of commercialized LiDAR sensors, such as the acquisition speed and the number of echoes, was investigated, and data acquisition and analysis were conducted by selecting Surveyor Ultra and VX15 models with similar accuracy and data acquisition distances. As a result, a DSM of each study site was generated for each sensor, and the characteristics of data density, precision, and acquisition of ground data from vegetation areas were presented through comparison. In addition, the UAV LiDAR sensor showed an accuracy of 0.03m ~ 0.05m. Hence, it is necessary to select equipment considering the characteristics of data for effective use. In the future, the use of UAV LiDAR may be suggested if additional data can be obtained and analyzed for various areas, such as urban areas and forest areas.