• Korean journal of food and cookery science
• /
• v.30 no.5
• /
• pp.540-546
• /
• 2014

This study was conducted to compare the commercial noodle flours (n=8) of each milling company in Korea. Eight noodle flour samples were classified into two types of flours, all-purpose flour (AF, n=4) and premium noodle flour (PF, n=4) and tested using general component analysis. Texture assessment and sensory test for doughs and noodles were performed. The dough strength was positively correlated with lower ash content, smaller particle size and longer formation time. Sensory evaluation found that weaker cooked noodle strength correlated with higher scores in preference and softness. As a result, it can be suggested that PF is better than AF in noodle making because PF has lower ash content and smaller particle size than AF. As such, flour characteristics that produce noodle flour of uniform quality can be obtained by combining flours with the above processing characteristics to fit the qualities desired.

• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.64-71
• /
• 2017

This study investigated the effects of the mixing ratio of tofu paste and normal corn starch on the characteristics of gluten-free (GF) muffins. Soft wheat flour for wheat flour-based muffins (control) was replaced with the mixture of tofu paste and normal corn starch (NCS). The mixing ratios of tofu paste and NCS were 1:6.4 (S100), 1:5.1 (S80), 1:3.8 (S60), 1:2.6 (S40), 1:1.3 (S20), and 1:0 (S00), based on their total solid contents. GF muffins of S40-S100 developed the porous, sponge-like structure without crumb collapse. The weight and baking loss did not significantly differ in the control and GF muffins. By decreasing NCS in GF muffin batters, the moisture content, firmness, and crumb redness/yellowness of GF muffins increased, while their volume, specific volume, and crumb lightness decreased. Nevertheless, these characteristics (except for firmness) of S100 were much closer to those of the control. In the preference test, however, S60 (possessing lower attributes than S100 and S80) was most favored among GF muffins, and was very similar in all evaluations (except for appearance) to the control. Overall, the mixture of tofu paste and NCS would be a potential material to replace soft wheat flour in muffins.

• Korean Journal of Food Science and Technology
• /
• v.5 no.1
• /
• pp.16-24
• /
• 1973

Breads were made from composite flours based on domestic resources and their quality was assessed to obtain the following results. 1) When barley bread was made according to the formula for standard wheat bread, its specific loaf volume (SLV) was quite low (1.3 at 100% addition of water) in comparison with 3.3 for wheat bread. Addition of 10% defatted soy flour increased its SLV to 1.7 (at 100% water). Among various flour-improving additives, the use of 1.5% GMS + 0.5% CSL gave best results (SLV: 2.0 at 100% water). Admixture of wheat flour with the composite flour based on barley was most effective. Replacement of barley flour with 25% wheat flour gave SLV of 2.8 (at 90% water) and that with 50% wheat flour gave SLV of 3.2 (at 90% water), comparable to standard wheat bread with respect to loaf volume, color and texture. 2) Sweet potato bread had the characteristics of turning black-brown on baking. Use of 20% defatted soy flour and GMS + CSL gave higher SLV (1.9 at 100% water). Addition of wheat flour at 25% or 50% level to the composite flour based on sweet potato flour gave SLV of 2.3 and 2.6, respectively, at 90% water and its color and texture were improved 3) Potato flour was different from sweet potato flour in baking, the effect of GMS + CSL being quite low. Bread from corn flour was different from barley flour bread and defatted rice bran was not suitable for bread-making. 4) Bread was made from following composite flours based on naked barley and sweet potato flours along with the use of proper additives: (a) naked barley flour + defatted soy flour + wheat flour (45 : 10 : 45) (b) naked barley flour + defatted soy flour + wheat flour (67 : 10 : 23) (c) naked barley flour + defatted soy flour (90 : 10) (d) sweet potato flour + defatted soy flour + wheat flour (40 : 20 : 40) (e) sweet potato flour + defatted soy flour (60 : 20 : 20) Sensory evaluation of above breads in comparison with standard wheat bread (So) gave the following decreasing order of scores, So>(a)>(b)>(c)>(e)>(d) and Duncan's multiple range test showed that bread (a) was not different from standard wheat bread significantly at 5% level, in overall evaluation including color, texture, taste and flavor.

• Food Industry
• /
• s.18
• /
• pp.80-83
• /
• 1974

밀가루에 물을 가하여 반죽을 하게되면 특별한 점성과 신장성을 나타낸다. 이것은 밀의 배유부단백질이 gluten을 형성하므로서 나타나는 성질인데 이와같은 성질은 타곡류의 배유부에서는 볼 수 없고 오직 밀의 배유부만이 갖는 특성이다. 밀의 배유부가 이와같은 특성을 지니고 있기 때문에 타곡류가 도정에 의하여 입형으로 가공되는데 비해 밀은 제분에 의하여 분형으로 가공되는 것이다.

• 베이커리
• /
• no.7 s.444
• /
• pp.86-88
• /
• 2005

식이섬유는 매일매일 빼놓지 말고 섭취해야할 현대인의 6대 영양소 가운데 하나다. 이제 야채에만 들어있는 줄 알았던 식이섬유를 빵과 케이크에서 섭취할 수 있는 길이 열렸다. 한국동아제분(주)가 품질 좋은 식이섬유로 알려진 '저항선분'을 배합해 개발한 건강 기능성 밀가루 '파이버-선(Fiber sun)'에서 그 해답을 찾을 수 있다.

• Applied Biological Chemistry
• /
• v.46 no.1
• /
• pp.39-45
• /
• 2003

This study was conducted to investigate the effect of ash contents of bread flour on the rheology of frozen dough In making frozen dough by measuring amylograph, flrinograph and extensograph. The quality of frozen-stored dough under freezing condition ($-20^{\circ}C$, 12 weeks) was evaluated by measuring final proof time, moisture content, baking loss, loaf volume and hardness of bread with storage time. In bread flour with high ash content farinogram showed that water absorption, degree of softening increased but valorimeter value decreased. In bread flour with low ash content amylogram showed that gelatinization temperature and maximum viscosity increased and extensogram showed that the area and resistance of the bread flour increased. As the proof time increased the extensibility decreased. Final proof time of frozen dough was shortened at the bread flour with low ash content with storage time. In bread using the flour with high ash content, moisture content, increased but baking loss rate decreased while the hardness of product increased slowly with time. But in bread using the flour with low ash content, the loaf volume of baking increased but the hardness of product decreased. As the frozen storage time was shortened, the product was more stable and better in quality.

• Journal of Nutrition and Health
• /
• v.16 no.3
• /
• pp.146-153
• /
• 1983

In this study, buckwheat four was classified by the order of extraction from the inmost layer to the outmost layer, and was designated as $B_1,\;B_2,\;B_3,$ and the mixed flour of $B_1,\;B_2,\;B_3$ (1:1:1) was named $B_0$. To improve the dried noodle-making properties, various levels of strong wheat flour and additives such as sodium alginate (SA) and xanthan gum(XG) were added to buckwheat. 1) The buckwheat $B_2$ and $B_3$ flours contained much higher amounts of crude ash, protein and fat than the $B_1$ flour. 2) Buckwheat $B_3$ flour demonstrated lower maxium viscosity value by amylograph than the $B_1$ flour, but it demonstrated 2 times higher maximum viscosity value than wheat flour. Buckwheat $B_1$ flour demonstrated 4-5 times higher maximum viscosity value than wheat flour. Addition of SA and XG increased the viscosity of the flour mixtures. 3) It was possible to make dried noodles from the composite flour of (buckwheat 40 %+wheat 60 %). The lesser the quantity of buckwheat flour was, the better the kneading property of mixed flour was. 4) SA and XG, which were added at the level of 1.0-1.5%, significantly improved dough making properties and the cooking quality of the noodles.

• Korean Journal of Food Science and Technology
• /
• v.39 no.1
• /
• pp.33-38
• /
• 2007

The peak time, peak height, width at peak, and the width at 8 min of Mixograph increased as the amount of sodium chloride in yellow alkaline noodle sheet was increased. The peak time of the Mixograph duration increased almost twice when 0.5% sodium carbonate was added to yellow alkaline noodle sheet, but decreased when the amount of sodium carbonate was above 0.5%. The peak height decreased as the amount of sodium carbonate increased. Protein content and sedimentation values showed positive correlations with the Mixograph peak height, width at peak, and width at 8min. The pasting temperature, peak viscosity, minimum viscosity, and final viscosity increased as the amount of sodium chloride in yellow alkaline noodle sheets was increased for all wheat flours. The peak viscosity, minimum viscosity, and final viscosity also increased as the amount of sodium carbonate increased. The pasting temperature showed a positive correlation with the water retention capacity and the alkaline water retention capacity.

• Korean journal of food and cookery science
• /
• v.14 no.2
• /
• pp.201-206
• /
• 1998

This study was conducted to determine the changes in the contents of vitamin C and reducing sugars of wheat flour and glutinous rice pastes added Kimchi during fermentation. Kimchi was fermented at 10$^{\circ}C$ for 14 days. Sensory evaluation of various Kimchi samples were also conducted. During fermentation, pH decreased in the order of wheat flour paste added Kimchi (WHFP-Kimchi), glutinous rice paste added Kimchi (GLRP-Kimchi) and control. Total acidity increased in the same order The contents of total vitamin C of all Kimchi samples decreased. Total reducing sugar contents of Kimchi juices from various samples decreased in the order of WHFP-Kimchi, GLRP-Kimchi and control. In sensory evaluation, the red color of Kimchi juice decreased in the order of control>WHFP-Kimchi>GLRP-Kimchi. Off flavor decreased control>WHFP-Kimchi>GLRP-Kimchi. Firmness decreased control> GLRP-Kimchi>WHFP-Kimchi. Sour tate decreased WHFP-Kimchi>Control>GLRP-Kimchi. But there were no significant difference in crispiness, ans salty taste. Overall prefernce decreased GLRP-Kimchi>control>WHFP-Kimchi.

• Korean Journal of Food Science and Technology
• /
• v.45 no.4
• /
• pp.473-477
• /
• 2013

The aim of this study was to identify the optimal ingredient-mixing ratio of Job's-tear and wheat flour subjected to extrusion. A modified distance-based mixture design analysis was chosen for the experimental design. The results showed that the bending failure force, the a-value, and the water absorbtion index (WAI) value had no correlation with the mixture ratio of Job's-tear and wheat flour. However, the diameter of the extrudates, the L- and b-values, and the water solubility index (WSI) value were all found to be correlated to the mixture ratio. While the first three values were determined using a linear model, the WSI value was determined using a quadratic model. The diameter and color had an inverse correlation to the mixture ratio: the higher the ratio of Job's-tear to wheat flour, the lower the diameter and darker the color. The L- and b-values were found to change in accordance with the mixture ratio of Job's-tear to wheat flour. The lowest WSI value was obtained at a 40:60 ratio of Job's-tear to wheat.