• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.1
• /
• pp.72-78
• /
• 2015

Recently, the usage of the satellite is increased more and more in the areas that are communication, weather, marine, optical, radar etc. The functions of the Satellite are evolving from passive transponder to active transponder by the developing of a technology. Advanced countries in satellites install the DCAMP for increase of bandwidth efficiency, improvement of QoS by interference rejection. DCAMP includes many digital components in order to implement functions. Thus, these kinds of active transponders consume much more power compared to passive transponder and then increase the heat. In this paper, we discuss the TVAC test result of DCAMP in EQM(Engineering Qualification Model) level. The paper shows the test results of digital gain control in order to verify DCAMP status under the TVAC test. In addition, the temperature and heat condition of main components from viewpoint of derating will be treated through the official environment test for qualification.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.632-637
• /
• 2014

In this paper the concept of the performance-based logistics (PBL) support for weapon systems is discussed and an enhancement is studied such that prior to the Operational phase, the development of the PBL can begin from the Engineering & Manufacturing Development (EMD) phase together with multiple performance indices considered. The genetic algorithm should be considered for the complex system to solve the maintenance policy optimization. In particular, the requirement of repair level analysis model is developed based on reflecting the PBL concept. To decide the maintenance policy prior to Operational phase in accordance with customer requirements, the PIDO(Process Integration and Design Optimization) technique useful in choosing the performance indices and changing the constraints was used. The genetic algorithm of PIDO tool, like PIAnO and ModelCenter, was verified that it could be applied to optimize the maintenance policy.

• Journal of the military operations research society of Korea
• /
• v.33 no.1
• /
• pp.135-155
• /
• 2007

A performance specification states requirements in terms of the required results, such as performance, environment and interchangeability, but without stating the methods for achieving the required results, such as material and process. therefore the performance specification is applied to attain economic efficiency and high reliability by using the advanced commercial Technology for the weapon systems and The development of performance specification and conversion into performance specification have been activated in the advanced nations. The Ministry of National Defence of Korea has regulated the specification to make performance type in developing specification and prepared performance specification guide. but the result of the development of and conversion into performance specification is very unsatisfactory, To efficiently develop and convert into performance specification, this study gives the way of market research, the creation of the performance specification from development of weapon system and part localization, the process and method for conversion of detail specification into performance specification, the use of hybrid type of performance and detail specification.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.366-373
• /
• 2019

Combat uniforms require higher tensile and tear strength than civilian products, and applied infrared reflectance from the recently developed nighttime fluoroscopy equipment to ensure combatant survival at night. Unlike other uniforms for civilian use, combat uniforms require durability against laundering because they may not be supplied again, once originally provided. Therefore, this study examined the changes in strength and changes in infrared reflectance after multiple washing of combat uniforms. The experiment confirmed that the strength change after the washing of combat uniforms 15 times was maintained in the same manner as the result after washing five times. In the case of infrared reflectance, the difference in reflectance after multiple washing treatments was greater than that in the case where washing was not performed. Therefore, although the durability in the case of combat uniforms is strong, it is necessary to maintain a reflectance higher than a certain level through the development of materials and the development of dyes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.233-239
• /
• 2019

An unmanned underwater vehicle is a major weapon system that allows surveillance and reconnaissance missions in border areas or threatening areas where enemy submarines are present. Unmanned underwater vehicles can be used to explore underwater resources, predict disasters, and survey the topography of the ocean floor in the civilian fields, while in the defense fields, it can be used for anti-submarine reconnaissance and mine countermeasures. In this paper, we first investigate the main classification of unmanned underwater vehicles, and foreign R&D trends are analyzed based on the main classification criteria by weight, such as portable, light, heavy and large-scale unmanned underwater vehicles. Then we examine the trends in the development of domestic unmanned underwater vehicles. Finally, through the analysis of both domestic and foreign unmanned underwater vehicles, we present future development trends of unmanned underwater vehicles in order to set defense goals to counter the anticipated threats and diversified potential environment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.378-378
• /
• 2020

우리나라에서 발생하는 자연재해 중 대부분이 홍수와 관련되어, 주로 호우를 동반한 태풍이나 돌발적인 집중호우에 의해 홍수피해가 해마다 발생하고 있다. 따라서 홍수발생 시 예상되는 피해지역과 피해의 규모를 예측하는 사전예방적인 홍수관리대책이 필요하며, 이를 위해 지역별 홍수특성별 피해양상에 대한 파악과 분석이 필요하다. 본 연구에서는 여러 수문학적 요소 중 홍수재해에 가장 영향력이 높은 강우특성과 재해발생으로 인한 직접적인 피해특성인 인적피해와 물적피해의 상관관계 분석을 위해, 홍수발생 원인에 따라 시군구별 강우-피해특성에 대한 회귀분석을 수행하여 향후 시군구별 홍수로 인한 피해 예측 및 대응에 활용하는 것을 목적으로 한다. 연구방법은 행정안전부의 국민재난안전포털에서 제공하는 재해연보 자료로부터 시군구별 호우 및 태풍으로 인한 이재민수와 인명피해자수를 종합한 인적피해특성과 총 재산피해액을 종합한 물적피해특성 자료를 구축하고, 홍수발생기간 동안의 강우특성을 파악하고자 전국 권역 기상청 관측자료를 수집하여 홍수피해 사상별 강우량 자료를 구축한다. 회귀분석 과정에서는 분석 결과에 악영향을 미칠 가능성이 있는 이상치가 존재할 경우, 이를 제거하여 시군구별 3가지 재해원인별(호우, 태풍, 종합), 피해특성별(인적, 물적) 강우조건에 따른 피해특성 예측을 위한 최적 회귀식을 선정한다. 본 연구를 통해 시군구별 강우조건에 따른 홍수피해 규모의 예측이 가능하다면, 행정구역별 호우 및 태풍으로 인한 인적 및 물적 피해예측 및 저감대책 수립에 기초자료가 될 것으로 판단된다.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.1024-1031
• /
• 2012

In the past, the part of development of that is used for the military aviation target or reconnaissance is being extended to the range of application not only reconnaissance but also civilian industry as the introduction of the newest IT technology and the technical evolution. The Civilian low-cost UAV that is expected growth at the market of UAV in the world is accelerated to the extended applicability in the fields. However, The UAV study is recently focused on the Link and The Data bus because the main decision of the civilian UAV system configuration is not suitable to determinate the factory of price. In this paper is analysed the UAV data bus through the simulation in same condition both the CAN Bus which used the automobile industry and the MIL-STD-1553B which is used the aviation industry. As a comparison result, we identified that the CAN Bus of conventional configuration is possible to transmit the data without the need for a separate coupler equipment against the MIL-STD-1553B data. Thus, we identified that the CAN bus is capable to apply as a low-cost UAV internal data bus to optimize configuration and weight than 1553B.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.130-138
• /
• 2020

In this paper, a plan to expand the scale of the domestic MRO industry was proposed by finding the technical common points between the aviation MRO and naval vessel MRO industries. The aviation MRO industry is led by Europe, North America, and Singapore. Europe and North America have very large aviation industries. The reason for the development of the MRO industry in Singapore is that the aviation MRO and ship MRO industries gathered to expand the industrial scale. The MRO field is an industry that spans all fields from research & development, production, manufacturing, operation, disposal, and crew training. The MRO industry is divided into military and civilian use. However, most of them are only differences in the needs of users, and there are no significant technical differences. The weapon system used by the military is steadily developing. It is impossible for the military to maintain all equipment at a time when troops are reduced. For that reason, it is necessary to share roles in each field. There is a need for an MRO industry in which civil and military operations cooperate to maintain all weapon systems at optimal performance. And the MRO industry development should be based on the civil market. The scale of the MRO industry should be expanded by gathering equipment commonly used in aircraft and naval vessels. This can increase military availability and reduce maintenance budgets.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1275-1282
• /
• 2012

Helicopter rotor systems are dynamically loaded structures with many composite components such as the main and the tail rotor blades. The fatigue properties of composite materials are extremely important to design durable and reliable helicopter rotor blades. The safe-life methodology has generally been used in the helicopter industry to substantiate dynamically loaded composite components. However, it cannot be used to evaluate the strength reducing effects of flaws and defects that may occur during manufacturing and operational usage. The damage tolerance methodology provides a proper means to overcome this shortcoming; however, it is difficult to economically apply it to every composite component. The flaw tolerant methodology is an equivalent option to the damage tolerance methodology for civil and military rotorcraft. In this study, the flaw tolerant safe-life evaluation is described and illustrated by means of successful application to substantiate the retirement time of composite rotor blades.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.185-196
• /
• 1997

By considering the definition and application of resolution as well as the concept and theory of SAR, the essential contents of the SAR design and analysis are described. This paper is to compare and analyze the resolution performance capability of three techniques for achieving azimuth resolution such as the real aperture, the unfocused and the focused techniques, through the simulation. Simulation is performed to make the restricted conditions for the unfocused technique that can be implemented by the less commputing load of signal processingand the lower cost. Through the mission analysis, the use of SAR image can be applied for estimation of whole situation at the regional area in the field of military demands for tactical purpose as well as civilian demands for the damage of disaster. RPV and sall or medium aircraft are selected to carry the SAR for these purposes and the proper resolution turns ou 5~15 m. The trade-off study of variables through the simulations results in the proper conditions such that range is less 3, 000 m, Wavelength is 1~10 m, and the raw signals and results processed by three techniques for two point targets are exhibited undr such conditions. Therefore, at some points, the result of this paper si proposed for useful applications of unforcused technique in the restricted conditions except the identification of the small target at a long range re- quired for high resolution.