• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.4
• /
• pp.29-39
• /
• 2002

In general, the intrusion detection method of anomalous behaviors has high false alarm rate which contains false-positive and false-negative. To increase the sensitivity of intrusion detection, we propose a method of aggregate detection to reduce false alarm rate by using correlation between misuse activity detection sensors and anomalous ones. For each normal behavior and anomalous one, we produce the reflection rate between the result from one sensor and another in off-line. Then, we apply this rate to the result of real-time detection to reduce false alarm rate.

• Journal of the Korea Society for Simulation
• /
• v.27 no.2
• /
• pp.11-24
• /
• 2018

The purpose of the present study is to develop an analysis model to analyze the design parameter sensitivity of a high-power drifter suitable for implementation in Korean hydraulic drills. This study aims to establish a basis for the optimization of the impact performance and stability of a high-power drifter by investigating the effects of each design parameter on the impact performance via design parameter sensitivity analysis. To begin, an analysis model of drifter dynamics is developed, and the reliability of the analysis model is verified by comparing the analysis results to the experimental results. The drifter is then redesigned for compatibility with Korean hydraulic drills. Finally, design parameter sensitivity analysis of the redesigned drifter is conducted to determine the effects of the design parameters on the impact performance, and to extract the high-sensitivity parameters. SimulationX, which is multi-physics analysis software, is used to develop the analysis model, and EasyDesign is employed for design parameter sensitivity analysis.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.47-52
• /
• 2015

To improve both the GOD immobilization capability and sensitivity of MWCNTs-based biosensor electrode, the electrode was prepared by adding different quantities of GO. The addition of GO increased hydrophilicity and the surface free energy of electrodes for glucose sensing as well as the dispersion of MWCNTs. In addition, the GOD immobilization capability was enhanced and the sensitivity was improved up to $121{\mu}A\;mM^{-1}$ even though having a high $K_m$ value (0.105) when adding 0.05 g GO to 0.05 g MWCNTs. These experimental results were attributed to the fact that the improvement in dispersion stability for MWCNTs, hydrophilicity, and surface free energy of electrode surface due to the addition of GO affected GOD immobilization capability.

• The Journal of the Korea Contents Association
• /
• v.15 no.4
• /
• pp.350-356
• /
• 2015

The aim of this study is to perform simulations to design the detector module with crystal array by Monte Carlo simulation. For this purpose, a small animal PET scanner, employing module with 1~8 crystal array discrimination scheme, was designed. The proposed scanner has an inner diameter of 100 mm with detector modules in crystal array. Each module is composed of a 5.0 mm LSO crystal with a $2.0{\times}2.0mm^2$ sensitive area with a pitch 2.1 mm and 10.0 mm thickness. The LSO crystals are attached to the SiPM which has a dimension of $2.0{\times}2.0mm^2$. The detector module with crystal array of the designed PET detector was simulated using the Monte Carlo code GATE(Geant4 Application for Tomographic Emission). The detector is enough compensation for the loss of data in sinogram due to gaps between modules. The results showed that the high sensitivity and effectively reduced the problem about the missing data were greatly improved by using the detector module with 1 crystal array.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.244-244
• /
• 2017

Recently, A study is actively underway to apply to various industries, which are one of the major changes in the key drivers of the industry 4.0.. The data generated by the ship include various indicators such as the fuel volume, engine power, ground speed, speed, speed, main engine rpm, DFOC, SFOC, and FOC. This paper analyzes the sensitivity of the Gathering data and analyzes the impact energy efficiency of the vessel operation by analyzing the influence among each parameter, using the mathematical models, you create an surrogate model using the math model, comparative analysis of actual measurement data and predictive results were analyzed. Through the use of big data analysis technology, it is possible to identify the sensitivity between the energy efficiency related variables of the ship, The possibility of utilization of fuel efficiency indicators using of the surrogate model is identified.

• Journal of the Korea Society for Simulation
• /
• v.22 no.3
• /
• pp.81-87
• /
• 2013

This paper is about study how to decrese surge pressure that is occurred in excavator driving motor. We used computer simulation program SimulationX. It is also about the way finding design problem and approaching a solution through interpreting shape design sensitivity analysis. Programmes are below. First of all, finding shape fault by analyzing dynamic behavior of valves installed in hydraulic driving motor which is designed now. And drawing variable which is considered sensitive to improve dynamic efficiency among a lot of shape variables. Then, targeting that variable and examining dynamic efficiency stabilization tendency with controlling it. Finally, suggesting the most effective tuning method through variable combination as there are a lot of sensitive variables.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.157-162
• /
• 2023

A highly sensitive refractive index bio-sensor based on grating-assisted strip directional coupler (GASDC) is proposed. The sensor is designed using two asymmetric strip waveguides with a top-loaded grating structure in one of the waveguides. Maximum light couples from one waveguide to the other at the resonance wavelength satisfying phase-matching condition (PMC), and it shows that the change in phase-matching condition with the change in refractive index of the analyte medium in the cover region can be used as a measure of the sensitivity. The proposed sensor will be an on-chip device with a high refractive index sensitivity, and the sensor configuration offers a low propagation loss, thereby enhancing the sensitivity. Furthermore, variation of the sensitivity with the waveguide parameters of sensor is evaluated to optimize the design.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.405-410
• /
• 2005

In these days, the piezoresistive material has been applied to various sensors in order to measure the change of physical quantities. But the relationship between the sensitivity of a sensor and the position and size of piezoresistor has rarely been studied. Therefore, this paper was focused on the distribution of the resistance change ratio on the diaphragm and bridge surface where piezoresistor would be formed, and proposed the proper size and position of piezoresistor with which the sensitivity of sensor was increased. As the width of mass and boss was increased, the distance between piezoresistors was closed and the maximum value of resistance change ratio was decreased by the increase of the structure stiffness.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1852-1860
• /
• 1991

A shape design sensitivity of the elastic deformation due to a change of traction boundary condition is presented. The solution of governing equations for a linear elasticity problem is obtained by finite element method and the traction boundary is defined by design variables. The performance functional to be considered involves both the domain and boundary integral. Variations of geometry can be defined as design velocity. Using material derivative concept and adjoint equations, the design sensitivity is derived by Lagrange multiplier method. For a given geometry of a structure, the change of traction boundary is described by the tangential component of the design velocity only. The final result for the shape design sensitivity is formulated as the boundary integral form, the integrand is defined by tangential component of design velocity and first order derivatives of parameters. Numerical implementation of design sensitivity is discussed and is compared with the difference of the actual values.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.19-19
• /
• 1998

라이너를 포함한 필라멘트 와인딩 복합재 압력용기의 성능향상을 위한 효율적인 구조최적 설계방안을 제시하였다. 이를 위해 온도효과가 고려된 비선형 유한요소법을 이용하여 각 층에서의 응력해석과 파손해석을 수행하였다. 또한 설계변수로 라이너의 두께와 헬리컬 적층두께, 실린더를 따라 변하는 직각 적층두께를 설정하였다. 모든 설계변수들에 대한 강도비 민감도를 유도하였으며 헬리컬 적층두께에 대한 강도비 민감도를 유지하기 위해 측지 등장력 돔설계 방법을 고려하였다. 구조 최적설계결과, 실린더를 따라 직각 적층두께를 최적으로 분포시켜 강성을 효과적으로 배열하였으므로 적층두께를 일정하게 고려한 경우보다 더 경량화 시킬 수 있었다.