• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.213-216
• /
• 2016

미연방항공청(FAA)은 항공기 인증업무에 대한 개선을 지속적으로 노력하고 있다. 항공기 제작 산업이 발전하고 있고, 국제공동 개발 등 다양한 형태의 사업구도가 증가하고 있다. 또한 무인기와 같은 새로운 형태의 항공기에 대한 인증업무가 필요하게 되었다. 이에 따라 증가하는 인증업무 수요에 대응하고자 업무 절차 및 인력에 대한 효율적 관리를 목적으로 제도 및 조직을 개편하고 있다. 국내 항공산업 또한 환경의 변화가 예상되며 미국의 사례를 통하여 국내 항공기 인증 체제의 나아갈 방향에 대하여 고찰해 보았다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.207-212
• /
• 2017

Korean civil airworthiness requirements of powerplant system are regulated on KAS Part 23 and Part 33. These are equivalent to FAR Part 23, Part 33 of FAA and CS-23, CS-E of EASA. FAA and EASA rewrites entire airworthiness requirements for the small airplane. It changed current 'prescriptive regulation' into 'performance-based regulation' which makes the object of safety performance. Powerplant requirements are also changed extensively by these concept revolution. In accordance with reorganization, we studied new powerplant system requirements of FAR Part 23 and proposed ideal direction to rewrite of Korean Airworthiness Standard rewrite.

• The Journal of Aerospace Industry
• /
• s.67
• /
• pp.22-46
• /
• 2004

항공전자부품은 항공기의 핵심기능 분야를 구성하는 부품으로서 개발 및 제작 단계에서 안전성 및 신뢰성 평가를 수행하여야 하며 개발한 항공전자부품을 항공기에 창착하기 위해서는 감항기준에 의거한 적합성을 검증 받아야 한다. 미국 연방항공청에서 고시하고 있는 기술표준품(TAO) 중 항공전자부품은 약 65%를 차지하고 있으며 TSO로 지정되지 않은 PMA 부품 등을 고려하며 부품의 종류 및 량은 상당수에 이르고 있다. 최근의 항공전자부품은 디지털화의 가속화로 비행안전기능이 보강되고 조종사의 업무강도를 줄이는 방향으로 발전되어 가고 있다. 그리고 이러한 분야에는 소프트웨어가 채용되어 소프트웨어의 인증이라는 인증절차가 개발되고 있다. 이 글은 국산 항공전자부품의 개발에 앞서 항공전자부품의 인증 내역을 제시함으로서 국내 독자적인 인증 수행은 물론 설계 참여자들이 인증에 대한 인식이 될 수 있도록 하였고 내용적으로는 미연방항공청(FAA)과 유럽공동감항기구(JAA)의 절차를 중심으로 작성하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.201-204
• /
• 2017

An comparative analysis between two engine type certification specifications which are FAR Part 33 and EASA CS-E has been performed to provide fundamental information for validity assessment of civil certified engine when it is installed to a military rotorcraft. The analysis result has been used to build a traceability information between CS-E and MIL-HDBK-516C by which the substantiation data for engine type certification can be used as parts of aircraft propulsion system airworthiness substantiation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.2
• /
• pp.16-26
• /
• 2014

After the GBAS ground system installing at the airport, a GBAS ground and flight testing must be conducted to verify functionality and performance of the system. Since Korea has no experience of the GBAS ground system installation, GBAS test and evaluation methods have never been studied so far. Therefore this paper analyzes the test items and methods for the GBAS ground and flight testing based on ICAO documents, FAA flight inspection manual and testing reports of other countries. As a result of the analysis, this paper proposes the GBAS ground and flight testing items in korea, also describes the flight procedures for the GBAS flight testing.

• Journal of Aerospace System Engineering
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2023

Recently, aerospace industries in South Korea are expected to continue to grow due to UAM. Accordingly, certification services for aircraft are expected to increase. As a way to cope with the increase of certification work, one could consider a delegation system that can limitedly delegate the unique role of airworthiness authorities. In this paper, we reviewed regulations of FAA's individual delegation (DER, DAR, DMIR, etc.), the organizational delegation system (ODA), and the EASA's organizational delegation system (DOA, POA). We also reviewed regulations and actual status of delegation system in South Korea. On the basis of these, considering circumstances of aerospace industries in South Korea, we presented a method to introduce certification delegation system gradually and to improve domestic certification regulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.115-121
• /
• 2019

The purpose of this study is to establish the training standards for HF of aviation maintenance reflecting the growing relevance of aviation maintenance technicians' ability to perform their work for the safety and efficiency of airline operation. For this purpose, previous studies on the concept of human factors were examined, and the HF training standards of the advanced international aviation bureaus such as the International Civil Aviation Organization(ICAO), Federal Aviation Administration(FAA) and European Aviation Safety Agency(EASA) were compared with the operational technical standards of Korea Aviation Safety Law. In addition, the actual status of human factors education and training were examined for Korea's two full service carriers (FSC) and four of the low cost carriers (LCC). The study results revealed that Korea's human factors education and training standards were weak compared with international standards, and that most airlines were not able to systematically implement human factors education and training. These results complement the existing problem of training standards for aviation maintenance human factors in Korea and support the development of a standard model of the training course for aviation maintenance human factors which meets international standards.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.7
• /
• pp.55-62
• /
• 2006

This thesis describes collision avoidance using fuzzy logic based on "Right of way" rules of ICAO and FAA and pilot's experiences for Unmanned Aerial Vehicle(UAV). To apply the rules, we designed fuzzy logic based collision avoidance system. And we also designed decision logic for enable condition of collision avoidance system. Decision logic have three kinds of core key, i.e. Relative Range, Time of CPA(Closest Point of Approach) and Distance at CPA. Application of decision logic made a possible to avoid NMAC(Near Mid-Air Collision) and it has been verified through several simulations. To conclude, we proposed the method to carry out "See and Avoid" ability on UAVs, which is capability to mingle with manned aircraft in civil airspace.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.2
• /
• pp.124-135
• /
• 2010

The Japanese and U.S. governments has signed a Bilateral Aviation Safety Agrement and associated implementation procedures for airworthiness on April 27, 2009 to mutually accept the airworthiness approvals for aircraft and parts that the other country issue. This bilateral agreements do not relieve the Civil Aviation Authority(CAA) of its statutory responsibilities for certification. However, they provide an alternative means for the CAA to make its findings, recognizing the competency of another authority to conduct certification functions in a manner comparable to, and on behalf of, the CAA. In this way, the bilateral agreements contribute to ensuring aviation safety as well as reducing the burden imposed on the aviation industries without compromising safety. This paper is to discuss recent status of Bilateral Aviation Safety Agreement and associated Japanese Aircraft Certification System.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.345-366
• /
• 2018

Article 37 of the International Convention on Civil Aviation requires that rules should be adopted to keep in compliance with international standards and recommended practices established by ICAO. As SARPs are revised annually, each ICAO Member State needs to reflect the new content in its national aviation Acts in a timely manner. In recent years, data-driven international standards have been developed because of the important roles of aviation safety data and information-based legislation in accident prevention based on human factors. The Safety Management System and crew Fatigue Risk Management Systems were reviewed as examples of the result of data-driven rulemaking. The safety management system was adopted in 2013 with the introduction of Annex 19 and Chapter 5 of the relevant manual describes safety data collection and analysis systems. Through analysis of safety data and information, decision makers can make informed data-driven decisions. The Republic of Korea introduced Safety Management System in accordance with Article 58 of the Aviation Safety Act for all airlines, maintenance companies, and airport corporations. To support the SMS, both mandatory reporting and voluntary safety reporting systems need to be in place. Up until now, the standard of administrative penal dispensation for violations of the safety management system has been very weak. Various regulations have been developed and implemented in the United States and Europe for the proper legislation of the safety management system. In the wake of the crash of the Colgan aircraft, the US Aviation Safety Committee recommended the US Federal Aviation Administration to establish a system that can identify and manage pilot fatigue hazards. In 2010, a notice of proposed rulemaking was issued by the Federal Aviation Administration and in 2011, the final rule was passed. The legislation was applied to help differentiate risk based on flight according to factors such as the pilot's duty starting time, the availability of the auxiliary crew, and the class of the rest facility. Numerous amounts data and information were analyzed during the rulemaking process, and reflected in the resultant regulations. A cost-benefit analysis, based on the data of the previous 10 year period, was conducted before the final legislation was reached and it was concluded that the cost benefits are positive. The Republic of Korea also currently has a clause on aviation safety legislation related to crew fatigue risk, where an airline can choose either to conform to the traditional flight time limitation standard or fatigue risk management system. In the United States, specifically for the purpose of data-driven rulemaking, the Airline Rulemaking Committee was formed, and operates in this capacity. Considering the advantageous results of the ARC in the US, and the D4S in Europe, this is a system that should definitely be introduced in Korea as well. A cost-benefit analysis is necessary, and can serve to strengthen the resulting legislation. In order to improve the effectiveness of data-based legislation, it is necessary to have reinforcement of experts and through them prepare a more detailed checklist of relevant variables.