• Journal of the KSME
• /
• v.42 no.6
• /
• pp.48-53
• /
• 2002

초소형 정밀 부픔의 효율적 생산 방안으로 대두되고 있는 미세 체적 성형 기술에 관하여, 극세선 압출, 미세 복합 성형 기술과 핵심요소 기술인 정밀 위치 결정 기술, 미세 성형 재료 기계적 특성 평가 기술과 이론 해석 기술을 중심으로 국내 연구 현황과 전망을 소개한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.1039-1042
• /
• 2000

This research will deal with Innovative manufacturing technology for milli-structure manufacturing technology which is located betweon the traditional manufacturing technology for macro-sized structure and the recently emerging manufacturing technology for micro-scaled structure such as MEMS. There are four fields in this research, which are micro-sheet metal forming technology, micro-bulk forming technology micro-molding technology and micro die making technology. As a project for new-technology in next generation, this research will be carried out through three terms and each term and be composed of three years.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.14-19
• /
• 2000

현재 자본재산업의 기술낙후는 상품의 수출경쟁력 약화의 근원적인 원인이 되어 결국 지속적으로 선진국의 기술종속을 심화시키고 있다. 이러한 자본재 산업의 문제는 현재의 주력 수출상품의 핵심요소부품생산기술의 미비가 큰 원인이며(거의 주요핵심부품 도는 관련기술은 거의 대부분 수입에 의존하고 있음), 같은 논리로 차세대 신기술의 개발을 통한 첨단 상품의 개발도 이에 필요한 핵심요소부품의 생산기술이 뒤를 바쳐 주지 못한다면 결국 10년 후에도 현재와 같은 현상이 되풀이될 것은 분명하다.(중략)

• The Korean Journal of Rheology
• /
• v.3 no.2
• /
• pp.124-134
• /
• 1991

세라믹 재료들을 성공적으로 사출성형하기 위한 적절한 사출조건을 얻기 위하여 그 동안 많은 실험을 하여 왔으나 게이트 크기가 미치는 영향에 대한 연구는 미진하였다. 본 연구에선 압출기를 사용하여 미세한 질화규소분말과 결합제시스템을 혼합하였으며 이러한 세라믹혼합물을 이용하여 사출압력, 보압시간, 보압, 배럴온도, 게이트의 형태와 크기 등을 변화시키면서 사출성형 실험을 수행하였다. 55%의 세라믹혼합물을 사출실험한 결과 적절한 게이트의 크기와 형태를 선택하고 105 MPa의 사출압력과 10초의 보압시간, 24$0^{\circ}C$의 배럴온 도와 같은 사출조건하에서 성형한다면 불완전 충전 체적수축과 젯팅현상을 최소화시킬수 있 어 성공적으로 인장시편과 굽힘시편을 성형할 수 있음을 알수있었다. 상용프로그램인 C-MOLD를 이용하여 사출조건과 게이트의 크기를 변화시키면서 혼합물의 유동특성을 해석 하였다. 유동해석 결과. 세라믹혼합물은 순수고분자보다 열전도도가 크고 비열이 작아서 고 화가 빨리 되므로 게이트의 크기는 사출압력, 배럴온도와 같은 사출조건과 더불어 중요한 사풀변수임을 예측할 수 있었다.

• Composites Research
• /
• v.32 no.1
• /
• pp.1-5
• /
• 2019

In this study, Al1050 composites reinforced with uniformly dispersed, high volume fraction $TiB_2$ particles were fabricated by liquid pressing process and analyzed to microstructure, mechanical properties. Hardness, ultimate tensile strength and compressive yield strength of the 56 vol.% $TiB_2$-Al1050 composite increased to 10, 4.5 and 9.8 times, respectively, compared with those of the Al1050 due to dispersion hardening effect of uniformly dispersed $TiB_2$ in the Al matrix.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1716-1723
• /
• 2014

This study was designed to examine the change in physical properties of extruded brown rice-vegetable mix at different pregelatinized brown rice contents and $CO_2$ gas injection. Moisture content, screw speed and die temperature were fixed to 30%, 100 rpm and 60, respectively. $CO_2$ gas injection was adjusted to 0, 300, 600, and 800 mL/min. The content of vegetables (carrot, pumpkin, kale and Angelica keiskei) mix was fixed 5%. Pregelatinized and raw brown rice powder were blended as the ratio of 0/95, 30/65 and 50/45. Specific mechanical energy input decreased as pregelatinized brown rice ratio increased. Expansion index increased and the size and number of pores increased but density decreased with the increasing in $CO_2$ gas injection. Gelatinization degree increased as $CO_2$ gas injection increased. In conclusion, cold extrusion with $CO_2$ gas injection at $60^{\circ}C$ die temperature could be applied for Saengsik (uncooked food) making.

• Journal of Life Science
• /
• v.30 no.6
• /
• pp.563-569
• /
• 2020

Oncoplastic surgery (OPS) combines oncologically safe tumor resection with aesthetically satisfying reconstruction of defects using established plastic surgery techniques. OPS is characterized by initial excision as extensive as is beneficial for oncological safety, and, once sufficient resection is complete, displacement or replacement techniques are selected based on remnant volume. The size of the lesion and the individual patient are important factors when considering the appropriate approach, and when pre-operative imaging, including MRI, is used to determine the technique, the complete removal of cancer cells by permanent pathology is essential. A frozen section is used during the operation to reduce the reoperation rate, but it is difficult to cover the entire margin surface theoretically and even harder in practice. A recent report about adequate margins has empowered OPS in its oncological safety. Considering the patients to whom each modality could be applied, basic breast volume is an important factor, and this is influenced by ethnic differences. In Europe or the US, for example, the average breast size is 36D (600 ㎤) and reduction mammoplasty is predominantly used. However, the average size of patients in our institution is 33A (300 ㎤), and so quite different approaches are selected in most cases. New techniques involving radiofrequency and fluorescence have been proposed as safe and easily accessible ways of reducing complications.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.3
• /
• pp.127-132
• /
• 2014

$Y_2O_3$-BN ceramic composites were fabricated from the slurries of yttria powder with average particle size of 3~10 ${\mu}m$. The slurry was fabricated by mixing PVA binder, NaOH for Ph control, PEG, BN powder and $Y_2O_3$ powder. The mixed $Y_2O_3$ powders were obtained by spray drying process from the slurry. The $Y_2O_3$-BN composite specimen was shaped in size of ${\O}14mm$ and then sintered at $1550^{\circ}C$ and $1600^{\circ}C$, respectively. The characteristics, microstructure, purities, densities, bulk resistance, thermal expansion, hardness and plasma resistance of the $Y_2O_3$-BN composites were investigated with the function of BN contents and sintering temperature.