• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.961-967
• /
• 1998

In order to improve the optical properties and printability of paper, various fillers are used in papermaking. This study was performed to investigate several fillers-precipitated calcium carbonate(PCC), ground calcium carbonate(GCC), and blends(PCC/talc or micro-talc(MVP) and GCC/talc or micro-talc(MVP)-for their effects on various newsprint properties. Results obtained from the study were summarized as follows ; 1) PCC treatment gave about 16.8% higher retention than GCC treatment at the filler level of 5% and the retention of filler in the handsheet increased as average particle size of mixed filler was increasing($PCC{\leq}GCC<MVP<talc$). 2) PCC treatment kept opacity more highly than no filler treatment and opacity decreased as average particle size of mixed filler was increasing. 3) Independent treatment of PCC kept tear strength more effectively than GeC did, and tear strength increased as average particle size of mixed filler was increasing. 4) Independent treatment of pee kept tensile strength more highly than other treatments and Gee treatment kept tensile strength highly than pee treatment under mixed filler treatment. 5) Burst strength under PCC treatments decreased linearly as average particle size of mixed filler was increasing. 6) Compared "With non-filler treatment, filler treatment gave much better printability.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.333-339
• /
• 2009

This study was done to determine if there is any difference in microleakage between experimental composite resins, in which various proportions of three component photoinitiators (Camphoroquinone, OPPI, Amine) were included. Four kinds of experimental composite resin were made by mixing 3.2% silanated barium glass (78 wt.%, average size; 1 ${\mu}m$) with each monomer system including variously proportioned photoinitiator systems used for photoinitiating BisGMA/BisEMA/TEGDMA monomer blend (37.5:37.5:25 wt.%). The weight percentage of each component were as follows (in sequence Camphoroquinone, OPPI, Amine): Group A - 0.5%, 0%, 1% / Group B - 2%, 0.2%, 2% / Group C - 0.2%, 1%, 0.2% / Group D - 1%, 1%, 2%. Each composite resin was used as a filling material for round class V cavities (diameter: 2/3 of mesiodistal width; depth: 1.5 mm) made on extracted human premolars and they were polymerized using curing light unit (XL 2500, 3M ESPE) for 40 s with an intensity of 600 mW/$cm^2$. Teeth were thermocycled fivehundred times between $50^{\circ}C$and $550^{\circ}C$for 30s at each temperature. Electrical conductivity (${\mu}A$) was recorded two times (just after thermocycling and after three-month storage in saline solution) by electrochemical method. Microleakage scores of each group according to evaluation time were as follows [Group: at first record / at second record; unit (${\mu}A$)]: A: 3.80 (0.69) / 13.22 (4.48), B: 3.42 (1.33) / 18.84 (5.53), C: 4.18 (2.55) / 28.08 (7.75), D: 4.12 (1.86) / 7.41 (3.41). Just after thermocycling, there was no difference in microleakage between groups, however, group C showed the largest score after three-month storage. Although there seems to be no difference in microleakage between groups just after thermocycling, composite resin with highly concentrated initiation system or classical design (Camphoroquinone and Amine system) would be more desirable for minimizing microleakage after three-month storage.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.47-58
• /
• 2024

This study were conduced experimentally to analyze the heat-generating performance, flexural strength, and microstructure of conductive mortar mixed with micro steel fiber and multi-wall carbon nanotube (MWCNT). In the conductive mortar heat-generating performance and flexural strength tests, the mixing concentration of MWCNT was selected as 0.0wt%, 0.5wt%, and 1.0wt% relative to the weight of cement, and micro steel fibers were mixed at 2.0vol% relative to the volume. The performance experiments were conducted with various applied voltages (DC 10V, 30V, 60V) and different electrode spacings (40 mm, 120 mm) as parameters, and the flexural strength was measured at the curing age of 28 days and compared and analyzed with the normal mortar. Furthermore, the surface shape and microstructure of conductive mortar were analyzed using a field emission scanning electron microscope (FE-SEM). The results showed that the heat-generating performance improved as the mixing concentration of MWCNT and the applied voltage increased, and it further improved as the electrode spacing became narrower. However, even if the mixing concentration of MWCNT was added up to 1.0 wt%, the heat-generating performance was not significantly improved. As a result of the flexural strength test, the average flexural strength of all specimens except the PM specimen and the MWCNT mixed specimens was 4.5 MPa or more, showing high flexural strength due to the incorporation of micro steel fibers. Through FE-SEM image analysis, Through FE-SEM image analysis, it was confirmed that a conductive network was formed between micro steel fibers and MWCNT particles in the cement matrix.

• Korean Journal of Environmental Biology
• /
• v.36 no.1
• /
• pp.11-20
• /
• 2018

In planktonic ecosystems, the microplastics are considered as a potential food source for the zooplankton. To study a relationship between the zooplankton and the neustonic microplastics, a research experiment was carried out during May in the surface layers of the Yeosu coastal areas including Yeoja Bay, Gamak Bay, Yeosuhae Bay, and Botdol Sea. A neustonic zooplankton net (mesh size $300{\mu}m$; mouth area $30cm{\times}18cm$) was towed from the side of the ship in the event that it would not be affected by waves crashing by the ship at a speed of ca. 2.5 knots. All of the microplastic particles were separated from the zooplankton. The zooplankton and microplastics were appearing in a range of 61 to $763indiv.m^{-3}$ and 0.0047 to $0.3471particle\;m^{-2}$, respectively. It was noted that the Acartia omorii, Paracalanus parvus s. l., Labidocera euchaeta, A. hongi, decapod larvae, and cirriped larvae were predominantly seen in the experiment. For verifying relationships between zooplankton and environmental factors in addition to microplastics, a model redundancy analysis (RDA) was performed. The zooplankton were divided into two groups on the basis of feeding types (i.e. particle feeders, and carnivores), and the associated zooplankton larvae were also separately considered. A review of the additional environmental factors such as water temperature, salinity, turbidity, chlorophyll-${\alpha}$ concentration, diatom density, and dinoflagellate density were also contained in the analysis. The results showed that a noted zooplankton abundance had no close relation with the occurring number of microplastic particles, but rather was significantly related with other noted environmental factors such as temperature, salinity, turbidity, and chlorophyll-${\alpha}$ concentration. This fact implies that most zooplankton can feed themselves as a unit, by selecting the most likely available nutritious foods, rather than microplastics under the circumstance of food-richness areas, such what food resources are available as in the location of coastal waters.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.12
• /
• pp.1762-1768
• /
• 2016

The objective of this study was to investigate the physicochemical properties of rice flour at different degrees of milling (DOM) and their influence on cooking, color, textural, and sensory properties of rice noodles. Higher DOM flour resulted in higher value of lightness and lower value of yellowness. Transition temperatures of rice flour were not significant, whereas the enthalpy of gelatinization increased with an increase in milling degree. Rice noodles were prepared with rice flours of DOM, and their quality and sensory properties were investigated. Cooking properties of rice noodles were not affected by DOM; however, color values were affected by DOM. In textural properties, values of hardness and chewiness of rice noodles were significantly reduced with an increase in milling degree. The sensory scores for overall acceptability, appearance, and texture were highest in higher DOM noodles (DOM 10% and DOM 12%).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.10
• /
• pp.1586-1592
• /
• 2005

In order to develop Houenia dulcis with natural food application the effect of Hovenia dulcis fruits powder content the physical, textural and sensory properties of noodles were examined. The analysis of the contents of free amino acids showed that 17 kinds of amino acids were detected and highest in 3$\%$ Hovenia dulcis fruits powder contents. The weight and the volume of cooked noodle were highest in control the more added of Houenia dulcis fruits powder contorts lessen the weight and the volume (p < 0.01, p < 0.001), the water absorption ratio was highest in control group. Hunter color value of noodle showed that L value was 7.62 in control, a and b values were highest in 5$\%$ added group. More added Houenia dulcis fruits powder contents increased a and b values (p < 0.001). Hardness, cohesiveness (p < 0.05), gumminess and brittleness (p < 0.001) were highest in control, springiness was highest in 1$\%$ added group (p < 0.001). Scanning electron micrographs of noodle showed that more added of Houenia dulcis fruits powder contents made the particle uniform, so softer and larger. Sensory properties showed that color of noodle and herb flavor were thicker in more added of Houenia duzcis fruits powder contents (p < 0.001). The taste was highest in 3$\%$ added Houenia dulcis fruits powder contents. Overall acceptability was also highest in 3% added group (p < 0.01).

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.449-470
• /
• 2018

A review of research trends on wood surface protection for exterior use obtained the following conclusions: It has been reported that inorganic compounds such as chrome and copper used as wood preservatives can protect wood from weathering. It has been shown that precoating with hydrophobic substances such as wax and oil, UV absorbers, and HALS (Hindered Amine Light Stabilizers) enhances weathering resistance on the surface of ACQ-treated wood. Opaque coatings of paint/stains and semitransparent stains on the surface of preservative treated wood can increase the synergistic effects on prevention of weathering deterioration. Also the need for repainting periodically for the protection of the preservative treated wood surface has also been suggested. ZnO or $TiO_2$ of fine particles, metal ions such as Co, Cr, Fe, Mn, Ni and Ti, and UV absorbers such as tris-resorcinol triazine derivatives, triazine and benzotriazole were introduced as additives for preventing UV in the transparent coating on wood. Several reports showed that chemical modification such as methylation, acetylation, or alkylations have made some increases the effects of preventing weathering with the increasing weight gain of chemical formulas. In heat-treated wood, there were various contradictory reports on the resistance of weathering, and there were some other reports emphasizing the necessity of painting with UV resistance, which leads to the necessity of more advanced studies.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.12
• /
• pp.1360-1365
• /
• 2007

The purpose of this study is to present the basic data for nonpoint pollutant loads from bridge road drainage sediments using the results to analyze organic matter and heavy metals from the four bridge drainage sampling sites with sediments of different particle size ranges. The sediment sample was collected from the bridge road drainage and the masses of nine sediments fractions were obtained after drying the separated sediment in an over at $85^{\circ}C:>2,000{\mu}m$, $1,000\sim2,000{\mu}m$, $850\sim1,000{\mu}m$, $425\sim850{\mu}m$, $212\sim425{\mu}m$, $125\sim212{\mu}m$, $90\sim125{\mu}m$, $75\sim90{\mu}m$, $<75{\mu}m$. The sediment extract was analyzed water quality constituents, including chemical oxygen demand(COD), total nitrogen(T-N), total phosphorus(T-P), heavy metals and particle size distribution. The results indicate that most of particle size ranges of the bridge road sediments was $125\sim425{\mu}m$, and portion of $<75{\mu}m$ was low. But most of the pollutants are associated with the finer fractions of the load sediments. As the results of analysis, the range and average values of COD, T-N, T-P, Fe, Cu, Cr, and Pb were $177\sim198.8$ mg/kg(77.6 mg/kg), $23\sim200$ mg/kg(83 mg/kg), T-P $18\sim215$ mg/kg(129 mg/kg), and $1,508\sim5,612$ mg/kg(3,835 mg/kg), $9.2\sim69.3$ mg/kg(49 mg/kg), $19.1\sim662.2$ mg/kg(214 mg/kg), and $28.4\sim251.4$ mg/kg(114 mg/kg), respectively. The relationship between sediment size and pollutants concentration have an inverse proportion. The removal of road sediments with frequently could be reduced the significant nonpoint pollutant load, because of the bridge road sediment contains considerable micro-particles and heavy metals.

• Development and Reproduction
• /
• v.12 no.2
• /
• pp.195-202
• /
• 2008

The gonadosomatic index, germ cell differentiation, and the ovarian cycle in female jicon scallop, Chlamys farreri were studied by histologic and cytologic observations. In the early vitellogenic oocyte, the Golgi complex, mitochondria and rough endoplasmic reticulum were involved in the formation of lipid droplets. In the late vitellogenic oocyte, exogenous substances, namely, glycogen particles and lipid granular substances appeared in the germinal epithelium passed into the ooplasm through the microvilli of the envelope. Yolk granules and multivesicular bodies were involved in the formation of proteinecious yolk granules in the late vitellogenic oocyte. Vitellogenesis occurrs by endogenous autosynthesis and exogenous heterosynthesis. The auxiliary cells function as nutritive cells in the formation and development of the previtellogenic and early vitellogenic oocytes in their earlr stages. Monthly changes in the gonadosomatic index were closely associated with ovarian developmental phases. The reproductive cycle of this species can be classified into five stages: early active stage (January to March), late active stage (March to April), ripe stage (April to August), partially spawned stage (June to August), and spent/inactive stage (August to December). Spawning occurred from June to August, and the major spawning season was from July to August when the sea water was at high temperature.