• Title/Summary/Keyword: 미분체

Search Result 238, Processing Time 0.032 seconds

A Study of Mixing Characteristics for Cosmetic Pine Powder (화장품용 미분체 혼합공정에서의 분산특성 연구)

  • 이종옥;송건응
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.19 no.1
    • /
    • pp.85-107
    • /
    • 1993
  • The cosmetic fine powders were mixed with variation of mixing time(5) in the mixers (ribbon mixer, powder mixer, micropulverizer and fine impact mill). The powders were nixed with small amount of ferric oxide. as tracer. The mixed powders ere measured the particle size distribution, specific surface area and surface color with mixing time (s). The color variation, particle size distribution and specific surface area of the mixed powder exist a relationship with mining time(s) that can be expressed as mathematical equations to show the degree of the mixing of the powder mixture. The linear velocity of the impellar tip is the main factor contributing to he mixing efficiency of the mixers un this study. According to the linear velocity, he mixers used are devieded as convection mixing (ribbon mixer), sclera mixing powder mixer) and diffusion mixing (micropulverizer/fine impact mill).

  • PDF

화학첨가제를 사용한 미분말 고화체 안정화 특성평가

  • Park, Jeong-U;Min, Byeong-Yeon;Choe, Wang-Gyu;Lee, Geun-U
    • Proceedings of the Korean Radioactive Waste Society Conference
    • /
    • 2009.06a
    • /
    • pp.150-151
    • /
    • 2009
  • 수화성이 회복된 미분말에 시멘트를 10% 첨가하고 무수규산을 20 wt% 배합하여 제작한고화체가 방사성 고화체 압축강도 인수기준에 만족함과 동시에 부피증가를 최소로 할 수 있었고이 조건으로 ANS 16.1 방법에 준하여 고화체 침출 실험이 진행 중에 있다. 고화체의 압축강도 및 침출지수 모두 처분장 인수 기준에 만족할 경우 콘크리트 미분말 폐기물의 부피 증가를 최소화함은 물론 안정한 상태로 처분할 수 있을 것으로 예상된다.

  • PDF

타원형 미분작용소와 특성류이론

  • 김홍종
    • Communications of the Korean Mathematical Society
    • /
    • v.12 no.4
    • /
    • pp.1015-1021
    • /
    • 1997
  • 타원형 미분작용소의 이론을 이용하여 옹골 다양체에서 정의된 벡터장의 특이점에 관한 푸앵카레-호프의 이론과 평다발의 오일러-푸앵카레 특성수를 연관시키는 법을 살펴보았다.

  • PDF

Hydration Properties of High Volume Cement Matrix Using Blast Furnace Slag and Alkaline Aqueous by Electrolysis (고로슬래그 및 전기분해한 알칼리 수용액을 사용한 하이볼륨 시멘트 경화체의 수화특성)

  • Kim, Sun-A;Park, Sun-Gyu
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.5 no.1
    • /
    • pp.8-13
    • /
    • 2017
  • This experimental study is purposed to analyze the effect of alkaline aqueous solution by electrolysis on strength development in order to develop high volume cement matrix using industrial by-products. Blast furnace slag was used a binder, and an alkaline aqueous solution obtained by electrolyzing pure water was used as an alkali activator. The hydration properties of these specimens were then investigated by compressive strength test, XRD and observation of micro-structures using SEM. As a result, we found that compressive strength increased with the addition of alkaline aqueous solution which cement matrix incorporating blast furnace slag. But those strength decreased reversely when replacing ratio of blast furnace slag was increased. It is judged that results of engineering properties evaluation on the binder and alkaline aqueous solution are useful as a basic data for mixtures design and evaluation properties of high volume cement matrix using by-products.

Evaluation of Structural Performance of RC Beams Retrofitted Steel Fiber consequential Replacement of Recycled Coarse Aggregate and Ground Granulated Blast Furnace Slag (순환골재와 고로슬래그 미분말을 치환한 강섬유 보강 RC보의 구조성능 평가)

  • Ha, Gee-Joo;Yi, Dong-Ryul;Ha, Jae-Hoon
    • Journal of the Korea Concrete Institute
    • /
    • v.25 no.5
    • /
    • pp.477-484
    • /
    • 2013
  • In this study, eleven reinforced concrete beams, ground granulated blast furnace slag, replacing recycled coarse aggregate (BRS series) and recycled coarse aggregate with steel fiber (BSRS series), and standard specimen (BSS) were constructed and tested under monotonic loading. Experimental programs were carried out to improve and evaluate the shear performance of such test specimens, such as the load-displacement, the failure mode and the maximum load carrying capacity. All the specimens were modeled in 1/2 scale-down size. Test results showed that test specimens (BSRS Series) was increased the compressive strength by 9%, the maximum load carrying capacity by 1~6% and the ductility capacity by 1.02~1.13 times in comparison with the standard specimen (BSS). And the specimens (BSRS Series) showed enough ductile behavior and stable flexural failure.

Evaluation of Shear Behavior of Precast RC Beams According to Replacement Ratio of Ground Granulated Blast Furnace Slag (고로슬래그 미분말 치환율에 따른 프리캐스트 철근콘크리트 보의 전단거동 평가)

  • Jeong, Chan-Yu;Kim, Young-Seek;Lee, Jin-Seop;Kim, Sang-Woo;Kim, Kil-Hee
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.18 no.2
    • /
    • pp.82-89
    • /
    • 2014
  • This study evaluates the shear performance of precast beams with ground granulated blast furnace slag. A total of four specimens according to replacement ratio of ground granulated blast furnace slag. The specimens under three loading points had a shear span-to-depth ratio of 2.5, and a rectangular section with a width of 200mm and a effect depth of 300 mm. In this study, existing equations were used for predicting the shear strength of the specimens. The shear strength by existing equations was compared with those of 89 reinforced concrete beams without shear reinforcement. It can be shown from experimental results that all specimens with ground granulated blast furnace slag showed a similar shear strength as compared with the specimen with portland cements alone.

Modern History of Parabolic Equations on a Riemannian manifold (리이만 다양체에서 포물형 편미분 방정식에 관한 근현대사 고찰)

  • Chang, Jeong-Wook
    • Journal for History of Mathematics
    • /
    • v.24 no.1
    • /
    • pp.31-44
    • /
    • 2011
  • Partial differential equations on a Riemannain manifold is one of the most important areas in differential geometry. In this article, we survey the role of parabolic equations on some of the main results of differential geometry and topology, especially in the modern mathematical history. Also, we introduce some recent research in this area.

An Assessment of Utilization of the Pungchon Limestone in Paper Industry (풍촌층 석회석의 제지 산업에서의 응용성 평가)

  • Lee, Na-Kyong;Noh, Jin-Hwan
    • Journal of the Mineralogical Society of Korea
    • /
    • v.20 no.4
    • /
    • pp.339-349
    • /
    • 2007
  • For various types of the Pungchon limestone, diverse mineral characters of the limestone including their size and morphology are investigated by using of ELS and SEM to examine the possibility of application as fillers to paper industry. Also, the measurement of zeta potential and the evaluation of coagulation properties in calcite suspension was made for fine powders of the limestone to examine the applicability and efficiency in wet-papermaking process. Fine powder of the Pungchon lime-stone, largely controlled by original mineral characters of ore in mineralogical aspects, exhibits some-what different trend in particle morphology according to ore types, and thereby, the size distribution, zeta potential and coagulation properties also become different. The examined whiteness, brightness, opacity and sheet strength in hand sheet also show remarkable differences according to ore types. These are seemed to be basically due to the results of combined effects of whiteness, site distribution, refractive index, and morphology of the limestone powder on the properties of hand sheet. Considering the investigated results, all types of the Pungchon limestone appear to be sufficiently applicable to paper industry. Especially, the mega-crystalline calcite type is evaluated to be overall suitable for the purpose of paper industry due to the higher values in whiteness and brightness. In addition the fine powder of micro-crystalline calcite type is assessed particularly to have a good quality in sheet strength by virtue of irregular particle shape.