• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.3
• /
• pp.132-139
• /
• 2022

UAM(Urban Air Mobility)은 가까운 미래에 현실이 되는 항공교통 체계로 미래 첨단 기술의 결정체이다. 비행은 인간의 생명을 절대 보장하는 숭고한 철학에 기반한다. 성공적인 UAM 개발을 위해서는 비행안전에 기초한 개발철학이 필요하며 올바른 방향을 제시해야 한다. UAM 체계와 유사한 항공교통체계는 민간항공 운항체계이며 UAM 체계의 개발을 도모하는 효과적 비교 연구대상이다. 본 연구는 민간항공 운항체계와 민간항공 조종사의 경험을 토대로 안전한 UAM 체계 개발의 방향을 제시하는 데 있다. 그중에서도 UAM 조종사 양성과 교육훈련체계 수립을 위한 방안을 제언하였다. 현존 관련법규를 검토하여 UAM 조종사 양성기준을 제시하였으며 초기 혼란을 방지하기 위한 대안을 포함하였다. 또한 민간항공기의 접근구간 항법성능을 측정하여 UAM 운항환경을 비교 예측하였다. 이를 통해 SMS 기법에 기반하여 UAM 체계의 위해요인(hazard)을 식별하여 미연에 사고를 예방할 수 있는 안전 방법론을 제시하였으며 UAM 로드맵의 올바른 정책 수립을 돕고자 한다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.284-298
• /
• 2022

It is necessary to acquire information on traffic safety facilities installed on the roadways specifically for the operation of autonomous vehicles. The purpose of this study is to prepare a Korean version of an integrated message-set design as a way to provide to autonomous vehicles standardized information on traffic safety facilities. In this study, necessary facilities are classified according to four criteria (no legal basis; not providing information to autonomous vehicles; providing duplicate information; not standardized, and too difficult to generalize) based on information that must be provided to operate autonomous vehicles. The priority of information delivery (gross negligence followed by behavior change) was classified according to the importance of the information to be provided during autonomous driving, and the form was defined for the classification code in the information delivered. Finally, the information location and delivery method of traffic facilities for compliance with SAE J2735 were identified. This study is meaningful in that it provides a plan for roadway operations by suggesting a method for providing information to autonomously driven vehicles.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.1-10
• /
• 2023

Due to the development of the industrial revolution, regulations on exhaust emissions have been continuously strengthened to reduce the rapidly increasing greenhouse gas emissions. The use of environmentally friendly fuels is essential to meet these regulations. Hydrogen has been attracting attention as a future environmentally friendly fuel, but due to its material properties, it faces significant challenges in handling and storage. As an alternative, ammonia has been proposed. Ammonia can be easily liquefied at room temperature compared to hydrogen and has a high energy density. In order to examine the applicability of ammonia as an engine fuel, experiments were conducted to investigate the effects of changes in combustion control parameters in a direct injection ammonia combustion engine. The experiments were conducted by varying two variables: spark timing and excessive air ratio. Observations were made on combustion stability and the trends of exhaust emissions such as nitrogen oxides and unburned ammonia under the conditions of an engine speed of 1,500 rpm and medium to high loads (brake torque of 200 Nm). By optimizing the combustion control parameters, conditions for stable combustion even when using ammonia as the sole fuel were identified, and plans are underway to apply strategies for future expansion of the operating range.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.29-36
• /
• 2024

Recently, the concept of Urban Air Mobility (UAM) has expanded to Advanced Air Mobility (AAM). A tilt rotor type of vertical take-off and landing aircraft has been actively studied and developed. A tilt-rotor aircraft can perform a transition flight between vertical and horizontal flights. A blade pitch angle control system can be used for flight stability during transition flight time. In addition, Individual Blade Control (IBC) can reduce noise and vibration generated in transition flight. This paper proposed Disturbance Observer Based Control (DOBC) and Time Delay Control (TDC) for individual blade control of an Electro-Mechanical Actuator (EMA) based blade pitch angle control system. To compare and analyze proposed controllers, numerical simulations were conducted with DOBC and TDC.

• Composites Research
• /
• v.35 no.4
• /
• pp.223-231
• /
• 2022

With the rapid growth of the future mobility market, a large number of electronic parts are being used in automobile, and the importance of electromagnetic interference (EMI) shielding in the automobile market is growing to minimize malfunctioning among the parts. Accordingly, conductive polymer composites (CPCs) are getting a lot of attention as EMI shielding materials for the automotive, but there are still challenges in CPCs like high content of conductive filler to achieve proper EMI shielding effectiveness, and poor mechanical properties. This paper introduces main methods to manufacture CPCs with segregated filler structure, which can significantly reduce the filler content, and analyzes EMI shielding performance of each manufacturing method.

• Knowledge Management Research
• /
• v.21 no.3
• /
• pp.1-25
• /
• 2020

This study analyzed key success factors of Korean car-sharing enterprises, Socar and Greencar, and the responsive strategies of Korean car-manufacturing company, Hyundai Motor Group, in the face of emerging sharing economy under the specific economic and regulatory system in Korea. The outcomes of the analysis are as follows. 'Timely market entry' in early startup phase and 'use of external resources' in early growth phase were key success factors common to both Socar and Greencar. However, the differences in the eventual business directions of the two companies also resulted in different key success factors in the expansion phase of their business. For Socar which focused on maintaining its independence and the external growth of B2C business, customer relation marketing and sufficient capital raising were key success factors. For Greencar which became a part of a business group and focused on improving the efficiency of business operations, timely market entry (B2B market) was key success factor. The use of external resources and cooperation with large corporations emerged as key success factors common to both companies in the rapid growth phase. The responsive strategies of the Hyundai Motor Group were collaboration, investment and direct management of DeliveryCar. The short-term goal of the responsive strategy was the operation of test-bed in collaboration with car-sharing company while the mid/long term goal was planning new mobility services by utilizing collected data. Securing opportunities for early market dominance for autonomous car industry was also found to be an important goal.

• Broadcasting and Media Magazine
• /
• v.24 no.1
• /
• pp.41-48
• /
• 2019

최근 유럽 위원회(European Commission)의 ICT 분야 연구에 대한 목표는 사이버 보안, 사생활 보호, 5G, 사물의 인터넷, 데이터 경제, 자유로운 데이터의 흐름(free flow of data) 등과 같은 디지털 정책 분야에 미래 EU(European Union) 자율주행 프로젝트의 초점을 맞추는 것이다. 이를 위하여 2017년과 2018년, 10개의 디지털 국경 커리도(Digital Cross-Border Corridors)가 발표되었고, 5G 기반 CCAM 서비스 실증을 확립하였다. 유럽 위원회는 이러한 5G 기반 CCAM 서비스 실증의 일환으로 2018년 3개의 대규모 프로젝트(5G-MOBIX, 5G-CARMEN, 5GCroCo)를 선정하였다. 본 기고문에서는 2018년 유럽 위원회에서 선정한 3개의 5G 기반 CCAM 프로젝트에 대하여 설명한다.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.4
• /
• pp.60-69
• /
• 2022

Recently, the importance of simulation validation in a virtual environment for autonomous driving system validation is increasing. At the same time, interest in the advancement of the virtual driving environment is also increasing. To develop autonomous driving technology, a simulation environment similar to the real-world environment is needed. For this reason, not only the road model is configured in the virtual driving environment, but also the driving environment configuration that includes the surrounding environments -traffic, object, etc- is necessary. In this article, FMTC, which is a test bed for autonomous vehicles, is implemented in a virtual environment and advanced to form a virtual driving environment similar to that of real FMTC. In addition, the similarity of the virtual driving environment is verified through comparative analysis with the real FMTC.

• Transactions of Materials Processing
• /
• v.32 no.2
• /
• pp.87-91
• /
• 2023

In the present work, the ductile fracture behaviors of ultra-high strength steel sheets along the different loading directions are investigated under various loading paths. Three loading paths, i.e., in-plane shear, uniaxial tension, plane strain tension deformations, are considered, and the corresponding specimens are described. The experiments are conducted using the digital image correlation (DIC) system to analyze the strain at the onset of the fracture. The experimental results show that the loading path for each specimen sample is linear, and different values of the fracture strains for the loading direction from the plane strain tension are observed. The ductile fracture model of the modified Mohr-Coulomb (MMC) is constructed based on the experimental data and evaluated along the rolling direction and transverse direction under various loading paths.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.716-723
• /
• 2023

Global discussions are actively underway regarding the introduction of urban air mobility (UAM) to revolutionize the paradigm in the innovative mobility industry. While research related to airspace, vertiports, navigation, and communication pertinent to Korean UAM is actively pursued by relevant research institutions, there is a significant dearth in studies focusing on establishing concepts for operational management by UAM operators and formulating control procedures. The commercialization of UAM necessitates the establishment of standardized operational management concepts, pivotal as benchmarks for the individual system development among multiple UAM operators. This paper analyzes UAM exceptional law, operational readiness, existing regulations pertaining to commercial and rotary-wing aircraft, and proposes suitable approaches to formulate domestic low-density operational management and control procedures. By presenting strategies for conceptualizing operational management and control procedures in the initial low-density environment for UAM, this paper aspires to contribute to future trail operations and the wider adoption of UAM.