• Korean Journal of Heritage: History & Science
• /
• v.42 no.4
• /
• pp.4-19
• /
• 2009

Though admitting that, in light of the recent archaeological trend, the excavation on relics of Sam-gama (a sort of kiln steaming the hemp) is increasingly reported, little efforts by far have been made not only to restore its traditional structure design but also to research hardly the change of hemp-steaming technologies in ages. In this regard, this paper shows the exploration of structural method and design as well as operability with regard to Sam-gut, traditional hemp-processing equipment that was recently reconstructed in Jungsun, Kangwon Province. Samgut, generally positioned at the waterside area, is an traditional device for steaming hemp to get bast fibers from the raw material of hemp, principally consisting of HWA-JIP(fire-place) to obtain steams by feeding fire ad Mong-got(boiling chamber) to make the hemp steamed after stacking. More specifically, thick round-logs were piled at the bottom of Hwajip prior to stacking stones around its circumferential area. When the timber positioned below gets burned with high temperature to heat stones existing in the upper side, waters then poured onto it after laying a bundle of grass and soil up to the boiled stones. If so, there generates hot vapor, which is conveyed to Monggot to steam the hemp. Functionally, it is of outstanding importance that Samgut is capable of producing high-temperature water vapors instantaneously under the intensive manpower, thus being constructed achievable for those purposes. The Samgut made by digging the ground is an instant facility that is closed after use. The remains, which were used to generate higher thermal power for steaming hemp, make it hard to excavate the historic traits because there left little vestiges in the soil, which means keen attention must be paid to find out the trace of Smgama relics. Future research stall be focused on collection of broader data regarding Samgut including technological review in extracting bas fibers from the hemp.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.304-311
• /
• 2019

After the teeth were extracted, maxillary and mandibular alveolar ridges show the opposite resorption pattern and as a result, the mandibular arch is enlarged than maxillary arch relatively. In this situation, we should evaluate both alveolar ridge relationship and arrange the artificial teeth properly for stability of removable prosthesis. This case is a 77 years old male patient who wishes to make removable prosthesis and has atrophic alveolar ridge. By use of model scanner and CAD software, the angle between interalveolar crest line and occlusal plane was easily measured. Depending on the measurement, the artificial teeth are arranged in unilateral cross bite and after completion, patient was satisfied with the denture which showed proper stability, retention, support.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.263-270
• /
• 2019

Current trends in restorative dentistry focus on improving the esthetics and keeping the sound dental tissues as long as possible. The aims of this case report were to describe the successful outcome of cubic-phase zirconia laminate veneers for a patient with isolated microdontia by using a digital workflow, and to describe their clinical implications. A 15-year-old female who had isolated microdontia in combination with spacing visited Ajou University Dental Hospital for esthetic treatment. In this case, 6 maxillary anterior teeth were restored with cubic-phase zirconia laminate veneers without tooth structure removal by using a digital impression, computer-aided design (CAD) software, and computer-aided manufacturing (CAM) procedures. At 6-month follow-up, no distinct mechanical and biological complications were detected and the prostheses exhibited satisfactory esthetics and functions. Due to its favorable tissue responses and enhanced translucency, cubic-phase zirconia can be a suitable strategy for a noninvasive esthetic approach.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.1
• /
• pp.212-235
• /
• 2010

The purpose of this study is to examine the characteristics of the location and the spatial composition of Uireung that is located in Seokgwan-dong, Seongbuk-gu, Seoul, in order to understand the landscape architectural characteristics. The results are as follows. First, Uireung is 6.4km from Changdeokgung Palace and 5.5km from Heunginjimun Gate. It did not violate the distance standard (40km) for the royal tombs according to Joseon Dynasty Neung-won Myo-je. Second, Uireung is in harmony with the nature and shows the authoritative characteristics of the royal authority through the spatial composition and rank(Entrance Area, Ceremonial Area, Burial Area). Third, there are burial mound, stone sheep, stone tiger, stone table, stone watch pillars in the upper platform, and stone civil official, stone horse, stone lantern in the middle platform, and stone military official, stone horse in the lower platform, and T-shape shrine, worship road in the ceremonial area. There is no pond and a tomb keeper residence, but the position, size, and form can be approximated through historical research materials. There are a colony of pine trees around the burial mound and 64 species of trees such as pine tree, zelcova tree, and fir tree below the burial mound.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.15 no.1
• /
• pp.74-78
• /
• 2019

Atypical teratoid rhabdoidal tumor(AT/RT) is a rare and fast-growing tumor usually diagnosed in childhood. Routine magnetic resonance imaging(MRI) assessment of AT/RT patients is done to detect metastatic tumors and recurrent lesions. The purpose of this case report is to present a case about caries treatment of a 3-year-8-month old female patient with AT/RT under general anesthesia. A 3-year-8-month old patient with AT/RT visited Seoul National University Dental Hospital for caries treatment. At the first dental visit, she was receiving chemotherapy. Multiple caries were observed from clinical and radiographic examination. The dental procedure was successfully performed under general anesthesia. Patients with brain tumor may take routine MRI to detect metastatic tumors and recurrent lesions. Dentists should take into consideration of possible dislodgement of restoration by ferromagnetic properties and artifact formation on MRI image. Ready-made zirconia crowns can be a good restoration option for such patients.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.3
• /
• pp.319-331
• /
• 2019

This study was conducted to find a solvent, a extraction method and optimized conditions for Artemisia iwayomogi extract. which is effective to anti-inflammatory and antioxidant activity. A. iwayomogi extract by distilled water, ethanol, methanol, hexane and ethyl acetate using ultrasonic, high-pressure and supercritical extraction was investigated for NO inhibitory and DPPH radical scavenging activity. Extract obtained by ethanol and ultrasonic extraction method showed high NO production inhibitory activity, DPPH free radical scavenging activity and yield. Response surface methodology (RSM) was applied to find a optimized ultrasonic extraction conditions. Results showed that the optimum conditions for the higher yield were ethanol solvent of 45.71% concentration with extraction time and ultrasonic power of 63.33min and 308.84 W, respectively. This condition predicted 15.85% yield, but real yield was $16.40{\pm}0.28%$. The optimum conditions for simultaneous anti-inflammatory and antioxidant activity were established as ethanol concentration (80.81%), extraction time (90.00 min) and ultrasonic power (400.00 W). NO production inhibitory and antioxidant activity were $89.77{\pm}1.37%$ and $60.12{\pm}0.39%$, respectively. These results showed similar to the predicted values of 94.54%, 58.03% respectively.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.268-291
• /
• 2019

In this paper, the features and meanings of the Yocoanabo (cave tombs) excavated in the Gongju and Buyeo regions were examined. The creation of the Yocoanabo in the Korean Peninsula was related to the situation in which the powers of the Northern Kyushu (九州) and Yeongsangang (榮山江) River Basin played certain roles and maintained power in the interactions of Wa and Baekje in the late 5th century until the early 6th century. The people buried in the Yocoanabo in the Gongju and Buyeo regions are most closely related to the Buzen (豊前) area in northern Kyushu. They also interacted with the Yeongsangang River Basin communities. The Yocoanabo in Gongju and Buyeo confirms the settlement of the Wa people. There were collective settlements such as the Danjiri (丹芝里) site on the outskirts of Woongjin (熊津). However, most of them were mixed with small local groups located on the main roads connecting Woongjin and Sabi (泗?) through the Geum River and land routes. Unlike the keyhole-shaped tombs of the Youngsangang River Basin, the Yocoanabo was not built until the 7th century. This explains differences in the backgrounds of the two types of graves. The people buried in the Yocoanabo are considered to have settled in the Baekje Kingdom and to have been responsible for practical work in the political and economic negotiations between Baekje and Wa. They came to the Baekje Kingdom collectively in connection with certain historical events. However, it had been presumed that most of the people came individually and dispersed to the local communities of Gonju and Buyeo.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.46-65
• /
• 2014

This study, under the title of Daeungbojeon Hall of Bulyeongsa Temple, Uljin and the architectural technique of the architect, aimed to make a comprehensive speculation on Daeungbojeon Hall of Bulyeongsa Temple whose accurate construction year was confirmed in 1725. While existing studies dealt with it separately between construction and Buddhist art history this study attempted to sort out it in one perspective by means of comparison with compatible objects in the area. The results are as follows. 1st, by means of comparison of wall painting of Daeungbojeon Hall of Bulyeongsa Temple and other wall paintings of Gyeongsang-do Province, it was estimated to be created before and after 1725, the founding year of the building. 2nd, the stylobate of Daeungbojeon Hall is the only and unique case that Guibu was supported by the bottom. Such stylobate was estimated to be built in the early period of Goryeo stylobate of PostLintel Construction which was more simplified than that of the traditional unified Silla period considering specific techniques. Lastly, by means of comparison of the architectural technique of Daeungbojeon Hall of Bulyeongsa Temple with other temples in Gyeongsang-do Province, the characteristics of the building were found. In particular, the same architectural technique was confirmed by direct comparison of style with Yeongsanjeon Hall of Tongdosa Temple in 1714 which was constructed by the same architect.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.1
• /
• pp.4-17
• /
• 2017

In this research, the chemical composition of the iron artifacts from the late 6th-century to early 7thcentury Baekje remains in Gwanbuk-ri, Buyeo, specifically of the nine iron artifacts including slags, furnace walls and ingot iron excavated in the District "Na", were examined by observing their chemical compounds and microstructures. As a result, GB1 and GB6 were determined to be proto-reduction lumps whereas GB2, GB3, GB4 and GB5 were determined to be tempered slags, respectively. Also, he furnace wall GB7 were containing mullite and cristobalite, which are high temperature index minerals, The extrusion temperature was found out to be about $1200{\sim}1300^{\circ}C$, and it is most likely that the smelting temperature in the furnace was in that temperature range. GB8 ingot iron was determined to be a forged ironware. This ingot iron was an intermediary product for making ironware and its nonmetallic inclusions displayed similar microstructure and contents compared to the forged iron. Because of the existence of proto-reduction lumps and forged iron, the iron making facility located in District "Na" most likely had a small-scale iron making facility that handled iron bloom smelting and refining processes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.247-254
• /
• 2019

Recently, in designing military equipment, considerable attention has been paid to maintaining operations, including reliability, maintenance, and maintenance time of equipment, from the early stages of development. Therefore, both users and developers stress the importance of design considering the maintenance time. This study evaluated the specific methodologies for predicting the realistic maintenance time, such as the access complexity of equipment, other than the standard maintenance time provided by the conventional method mil-hdbk-470a at the beginning of the design, and applied the time conversion factor using a measure of the maintenance complexity. In addition, the actual maintenance time reflecting the actual maintenance time of the developed equipment and the time-conversion factor applied was compared/verified to confirm the reliability of the data. In a study to set a target for repair and the repair of equipment design in the future, it is expected that the maintenance time of equipment that fails to measure the maintenance time for the initial actual equipment will be reflected as a more realistic time. Moreover, activities, such as research and design reflection activities, will be performed to reduce the maintenance time, operational maintenance cost, etc.