• Title/Summary/Keyword: 물공급 시스템

Search Result 554, Processing Time 0.033 seconds

Effects of Flood Peak Location on Riverbed Variation (하천의 하상변동에 대한 첨두 유량 발생위치의 영향)

  • Chae, Kuk-Sheok;Park, Sang-Deog;Kim, Nam-Ho;Kim, Min-Kyu
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.1591-1595
    • /
    • 2006
  • 하천은 인간에게 있어 물을 공급하는 중요한 하나의 공급원인 동시에 재해를 발생시킴으로서 인간에게 큰 피해를 줄 수 있는 위험물로서 존재한다. 이러한 이면을 가진 하천은 하천 자체로는 하천의 특성이 변화하지 않으며, 인위적이나 자연적인 원인으로 변화하는 것이다. 특히 강도가 큰 강우가 발생하였을 때 하천의 특성은 크게 변화한다. 강우시 하천은 유출량 증가와 유사량의 시공간적인 변화로 인해 형상거동의 자기조절 기작을 통하여 유역밖으로 이들을 안전하게 배출시키는 기능을 발휘한다. 하천 합류부는 각기 다른 특성을 가진 두 흐름이 만나는 지점으로 흐름과 지형 둘 다 변화하며, 합류부 이후에는 그 이전과는 다른 특성을 나타낸다. 따라서 합류부는 하천의 흐름상에서 중요한 부분이라고 할 수 있다. 본 연구에서는 강릉에 위치한 경포천과 제 1지류인 위촌천이 합류하는 구간을 대상으로 하여 홍수시 첨두유량의 크기와 발생위치 및 홍수 모의기간에 따른 하상변동에 대해 연구하였다. 이를 위해 1차원 하상 변동 모형인 HEC-6를 이용하여 하상변동을 모의하고 그 결과를 실측 하상변동량과 비교분석하였다. 유입수문곡선에서 첨두유량의 발생위치는 전반부, 중앙부, 후반부로 구분하였고, 홍수모의 기간은 1년, 5년, 10년으로 하였으며 1년 이상의 수문곡선은 1년의 수문곡선을 모의 기간만큼 반복 발생시키는 것으로 하였다. 그 결과 하상변동은 홍수 모의기간, 유입수문곡선의 첨두유량 발생위치와 첨두유량의 크기에 따라 그 양상이 현저히 달라지는 것을 확인하였다. 유입유량 조건에서 동일수문곡선의 반복에 따른 모의기간 별 하상변동은 퇴적과 침식의 규모가 확대되는 형태로 나타나는 것을 알 수 있다. 미치는 시간축척의 영향을 파악하기 위해 $70{\sim}90$ 시간 동안 실험을 수행하였다. 세굴의 측정은 투명한 아크릴로 제작된 수제 내부에 CC카메라를 수제 전 후면 및 측면에 설치하여 월류수제의 세굴 발생을 실시간으로 측정하며 동시에 수제의 각 면에 각각 3개의 압력센서를 설치하여 압력분포를 측정함으로써, 월류수제 주변의 압력변화에 따른 세굴심의 실시간 변화를 비교할 수 있도록 하였다. 수심이 연중 $25{\sim}35m$를 유지하는 H호의 경우 간헐식 폭기장치를 가동하는 기간은 물론 그 외 기간에도 취수구의 심도를 표층 10m 이하로 유지 할 경우 전체 조류 유입량을 60% 이상 저감할 수 있을 것으로 조사되었다.심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하

  • PDF

Performance Analysis of Pressure-retarded Osmosis Power Using Biomimetic Aquaporin Membrane (생체모방형 아쿠아포린 분리막을 이용한 압력지연삼투 발전 성능분석)

  • Choi, Wook;Bae, Harim;Lee, Hyung-Keun;Lee, Jonghwi;Kim, Jong Hak;Park, Chul Ho
    • Polymer(Korea)
    • /
    • v.39 no.2
    • /
    • pp.317-322
    • /
    • 2015
  • Salinity gradient power is a system which sustainably generates electricity for 24 hrs, if the system is constructed at a certain place where both seawater and river water are consistently pumped. Since power is critically determined by the water flux and the salt rejection, a membrane of water-semipermeable aquaporin protein in cell membranes was studied for pressure-retarded osmosis. NaCl was used as a salt, and $NaNO_3$ was used as a candidate to check the ion selectivity. The water flux of biomimetic aquaporin membranes was negligible at a concentration below 2M. Also, there is no remarkable dependence of water flux and ion selectivity on concentrations higher than 3M. Therefore, the biomimetic aquaporin membrane could not be applied into pressure-retarded osmosis; however, if a membrane could overcome the current limitations, the properties shown by natural cells could be accomplished.

A proposal of unit watershed for water management based on the interaction of surface water and groundwater (지표수-지하수 연계 기반의 통합수자원 관리를 위한 단위유역 제안)

  • Kim, Gyoo-Bum;Hwang, Chan-Ik
    • Journal of Korea Water Resources Association
    • /
    • v.53 no.spc1
    • /
    • pp.755-764
    • /
    • 2020
  • In South Korea, 850 standard watersheds and 7,807 KRF catchment areas have been used as basic maps for water resources policy establishment, however it becomes necessary to set up new standard maps with a more appropriate scale for the integrated managements of surface water-groundwater as well as water quantity-quality in the era of integrated water management. Since groundwater has a slow flow velocity and also has 3-D flow properties compared to surface water, the sub-catchment size is more effective than the regional watershed for the evaluation of surface water-groundwater interaction. The KRF catchment area, which has averagely a smaller area than the standard watershed, is similar to the sub-catchment area that generally includes the first-order or second-order tributaries. Some KRF catchment areas, which are based on the surface reach, are too small or large in a wide plain or high mountain area. Therefore, it is necessary to revise the existing KRF area if being used as a unit area for integrated management of surface-water and groundwater. A unit watershed with a KRF area of about 5 to 15 ㎢ can be effective as a basic unit for water management of local government considering a tributary composition and the location of groundwater wells, and as well it can be used as a basic tool for water demand-supply evaluation, hydrological observation system establishment, judgment of groundwater permission through a total quantity management system, pollution assessment, and prioritizing water policy, and etc.

Estimation of Unit Cost by Handling Cargo in Busan New Port DistriPark (부산항 신항 배후단지 취급화물별 비용 원단위 추정)

  • Kim, Yun-Hoe;Choung, Sang-Won;Kim, Yul-Seong
    • Journal of Navigation and Port Research
    • /
    • v.44 no.6
    • /
    • pp.550-556
    • /
    • 2020
  • Over the past years, the role of ports in the global network of supply chains has becoming increasingly important, not merely as a physical location for loading and unloading goods, but also as an essential center of economic activity where additional value is added to cargo. Due to the overall growing importance of ports, each country has chosen to adopt hub growth as a primary economic strategy. Northeast Asia in particular, due to its high population density, experiences intense competition between its ports. Busan's port, as a result, has used the establishment of Distripark in order to attract high and stable trade volume, and compete more effectively with other ports in the region. This study estimates the unit cost of the logistic process for the all principal cargos handled at Busan New Port, with the findings revealing that unit cost increases gradually starting with chemical products, LME bulk goods, automobile parts, LME containers, general cargoes, and LME inland transportation goods coming in last. Future research will look more closely at all all categories of cargo handled in the Distrpark of Busan New Port, thereby enabling us to better understand the value created by the port, and how to best implement effective trade volume-attraction strategy.

Influence of Agricultural Water Return flow on Aquatic Ecosystem in Downstream (농업용수 회귀수량이 하천 수생태에 미치는 영향)

  • Lim, Eunjin;Kim, Jonggun;Shin, Yongchul;An, Hyunuk;Nam, Won Ho;Lim, Kyoung Jae;Lee, KwangYa
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.246-246
    • /
    • 2020
  • 최근 우리나라에서 농업용수의 다원적 기능에 대한 공감대가 형성되고 작물생육에 필요한 관개용수로만 인식되던 농업용수의 개념이 농촌생활환경개선을 포함하는 다양한 지역용수로의 포괄적 개념으로 전환되고 있다. 농업용수는 식량생산 이외의 효용을 위한 다원적 기능을 가지며 농촌지역의 각종 생산활동과 생활조건의 유지개선을 위한 농업용수의 다원적 기능에 관한 관심이 증가하는 추세이다. 농업용수에서 발생하는 회귀수는 유역의 용수공급계획, 하천 유황의 예측, 관개용수 사용량 결정, 하천 건전화 방지, 수생생태계 보호 및 생물 다양성 확보 등 농업용수의 효율적 사용 및 환경생태유지를 위해 매우 중요한 역할을 하고 있다. 농업용수 회귀수량은 농업용수 중 하천으로 회귀하는 수량을 의미한다. 본류의 생태 유량 확보에 농업용수 회귀 수량이 기여하고 있으며 본류 하천의 환경 보전 기능을 하고 있다. 또한, 수생태계 보호 및 생물 다양성 확보 등 환경 생태 유지에 매우 중요한 역할을 하고 있다. 하지만 농업용수 회귀수량이 하천 수생태에 미치는 영향 분석 연구는 미흡한 실정이다. 따라서 본 연구의 목적은 대사 저수지 유역을 대상으로 농업용수 회귀 수량이 하류 하천 수생태에 미치는 영향을 정량적으로 평가하고자 한다. 본 연구에서는 회귀 수량은 관개용수량, 배수량, 침투량, 담수심 등 물수지 항목을 논물수지 모형에 적용하여 산정하였으며, 하류 하천의 생태유량 산정을 위해 대사저수지 하류에 위치한 생물측정망 자료를 통해 대표 어종을 선정하였다. PHABSIM 모형을 이용해 모의 대상 지역 특성 자료 및 인근 소하천 생물측정망 자료를 바탕으로 HSI 기반 대표 어종 서식처 환경에서 최적 생태유량을 산정하였다. 이를 통해 추정된 농업용수 회귀 수량에 따른 필요 유량이 어류 서식환경에 미치는 영향을 평가하였다. 본 연구 결과 대사저수지 하류 하천에서 농업용수 회귀수량이 차지하고 있는 기여도 큰 것으로 분석되었으며, 최적 생태유량과 비교한 결과 농업용수 회귀수량이 수생태(어류)에 미치는 영향이 큰 것으로 나타났다. 따라서 농업용수 회귀수량은 하류 하천의 하천유지수량뿐만 아니라 하천 환경생태유지에도 매우 중요한 역할을 하고 있음을 알 수 있다.

  • PDF

High-Resolution Paleoproductivity Change in the Central Region of the Bering Sea Since the Last Glaciation (베링해 중부 지역의 마지막 빙하기 이후 고생산성의 고해상 변화)

  • Kim, Sung-Han;Khim, Boo-Keun;Shin, Hye-Sun;Uchida, Masao;Itaki, Takuya;Ohkushi, Kenichi
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.14 no.3
    • /
    • pp.134-144
    • /
    • 2009
  • Paleoproductivity changes in the central part of the Bering Sea since the last glacial period were reconstructed by analyzing opal and total organic carbon (TOC) content and their mass accumulation rate (MAR) in sediment core PC23A. Ages of the sediment were determined by both AMS $^{14}C$ dates using planktonic foraminifera and Last Appearance Datum of radiolaria (L. nipponica sakaii). The core-bottom age was calculated to reach back to 61,000 yr BP. and some of core-top was missing. Opal and TOC contents during the last glacial period varied in a range of 1-10% and 0.2-1.0%, and their average values are 5% and 0.7%, respectively. In contrast, during the last deglaciation, opal and TOC contents varied from 5 to 22% and from 0.8 to 1.2%, respectively, with increasing average values of 8% and 1.0%. Opal and TOC MAR were low ($1gcm^{-2}kyr^{-1}$, $0.2gcm^{-2}kyr^{-1}$) during the last glacial period, but they increased (>5 and >$1gcm^{-2}kyr^{-1}$) during the last deglaciation. High diatom productivity during the last deglaciation was most likely attributed to the elevated nutrient supply to the sea surface resulting from increased melt water input from the nearby land and enhanced Alaskan Stream injection from the south under the restricted sea-ice and warm condition during the rising sea level. On the contrary, low productivity during the last glacial period was mainly due to decreased Alaskan Stream injection during the low sea-level condition as well as to extensive development of sea ice under low-temperature seawater and cold environment.

Trend and future prospect on the development of technology for electronic security system (기계경비시스템의 기술 변화추세와 개발전망)

  • Chung, Tae-Hwang;So, Sung-Young
    • Korean Security Journal
    • /
    • no.19
    • /
    • pp.225-244
    • /
    • 2009
  • Electronic security system is composed mainly of electronic-information-communication device, so system technology, configuration and management of the electronic security system could be affected by the change of information-communication environment. This study is to propose the future prospect on the development of technique for electronic security system through the analysis of the trend and the actual condition on the development of technique. This study is based on literature study and interview with user and provider of electronic security system, also survey was carried out by system provider and members of security integration company to come up with more practical result. Hybrid DVR technology that has multi-function such as motion detection, target tracking and image identification is expected to be developed. And 'Embedded IP camera' technology that internet server and image identification software are built in. Those technologies could change the configuration and management of CCTV system. Fingerprint identification technology and face identification technology are continually developed to get more reliability, but continual development of surveillance and three-dimension identification technology for more efficient face identification system is needed. As radio identification and tracking function of RFID is appreciated as very useful for access control system, hardware and software of RFID technology is expected to be developed, but government's support for market revitalization is necessary. Behavior pattern identification sensor technology is expected to be developed and could replace passive infrared sensor that cause system error, giving security guard firm confidence for response. The principle of behavior pattern identification is similar to image identification, so those two technology could be integrated with tracking technology and radio identification technology of RFID for total monitoring system. For more efficient electronic security system, middle-ware's role is very important to integrate the technology of electronic security system, this could make possible of installing the integrated security system.

  • PDF

(Development of Ring Core Auto-Classifier by Multi-Motor Control) (여러 개의 모터에 의하여 제어되는 링-코어 자동 선별기 개발)

  • Park, In-Gyu
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.39 no.2
    • /
    • pp.104-115
    • /
    • 2002
  • Core is the main component of inductor. This core should be classified into around 10 classes according to the value of inductance and Q. The coil should be winded with the outer-boundary of this core by different number of turns. Theses kind of precise inductors would be required in the future environment which PCs and communication devices demand more high speed and lower voltage level. It would be quite unefficient that only one core is classified once a time. There, it will be developed so that 10 cores are classified simultaneously. For the operation of classifying 10 cores once in a time, suppose 10 test instruments could be used. In this case, it would take much cost since a test instrument Is expensive. So, by using only one test instrument, it is really more desirable that this system is developed. Each core classified by 10 different classes is to be stored into the corresponding box through the corresponding rubber hose. 10 cores are passed on a serial line and are placed on each testing slot. Here, each core located at each slot is tested, and then the bowl located on the top of a step motor is moved into the corresponding spot by rotating step motor with some angles. Each bowl connected with the corresponding box through rubber hose. Actually 100 hoses are connected, 10 step motors are rotated at 10 different angles, so the size is really so big, the shape of connecting 100 hoses is so complicated. Therefore it is anticipated that the system would be going to be easily out of ordered. In this paper the main purpose is to make several suggestions to be able to work well in these kinds of being affected by the abnormal operation of motors and the flow of cores.

A Study on the Livestock Feed Measuring Sensor and Supply Management System Implementation based on the IoT (IoT 기반의 축산사료 측정 장치 및 사료 공급 시스템 구현)

  • An, Wonyoung;Chang, YunHi
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.10 no.5
    • /
    • pp.442-454
    • /
    • 2017
  • As the demand for meat products has steadily increased in Korea, so the livestock industry has full grown. However, the opening of import meat products is taking a toll on the local industry. Cost reduction on livestock feed, which comprises the majority of costs involved in the industry is urgent to gain a competitive edge. As Internet of Things (IoT) technologies are being applied across a multiple of industries, so are the cases of applied Smart Farm technology for efficient production. The following research aims to utilize IoT technologies to measure, in real time, the rate of depletion of feed and remaining amount and to propose an effective automated reorder & delivery system. First, a method of utilization of ultrasonic and temperature/humidity sensors to obtain corresponding data of remaining feed in the Feedbin is proposed. In addition, a method of sending the obtained data via on-the-farm gateway to Supply Chain Management (SCM) servers is proposed. Finally, utilization of the stored data to construct an automated reorder & delivery service system is proposed. It is in the researcher's intention to contribute to and enable the local livestock industry with the application of various IoT services.

Preliminary Study of Semi-continuous Liquid Recirculating Anaerobic Digestion for Source Separated Food Waste (음식물류 폐기물 처리를 위한 준 회분식 액순환 건식 혐기성 소화법에 대한 기초연구)

  • Cho, Chan-Hui;Lee, Byong-Hi
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.23 no.2
    • /
    • pp.28-35
    • /
    • 2015
  • In this study, the experiment was carried out to produce methane by applying Semi-Continuous Leachate Recirculation Anaerobic Digestion System fed with source separated food waste from school cafeteria. There were two systems and each system consisted of a bioreactor and a liquid tank. Each bioreactor had a screen near the bottom of the reactor. 2.5L of separated liquid was transferred to the liquid tank for 30min each day by using a tubing pump and the liquid from the liquid tank was pumped to the bioreactor at the upper of the bioreactor as soon as the transfer was ended. Through this circulation, the liquid having high concentration of VFAs was supplied to the top of bioreactor. At the beginning of the experiment, food waste/inoculum anaerobic sludge volume ratio was 2:8 that is 9g VS/L of OLR(Organic Loading Rate). Feeding was conducted every two weeks. Experimental results showed that the contents of moisture, combustible matter, ash were 65.91%, 32.73%, and 1.36%, respectively. Two different food waste loading were studied. The average organic loading rates were 3.51g VS/d for System A and 3.86g VS/d for System B, respectively. The average produced methane based on food waste fed to bioreactor were observed as $6.30m^3CH_4/kgVS{\cdot}d$ for system A and $4.94m^3CH_4/kgVS{\cdot}d$ for System B, respectively.