• Korean Journal of Remote Sensing
• /
• v.9 no.2
• /
• pp.21-34
• /
• 1993

Digitalized topographic information is necessary for many areas such as landscape analysis, civil engineering planning and design, and geographic information systems. It can also be used in flight simulator and automatic navigation of unmanned plane if it is stored in computer in relevant format. Topographic information is coded with various symbols including contour lines, and is analyzed by trained personnels. The information should be stored in computer for automatic analysis, but it requires a lot of time and manpower to enter the contours using manual input devices such as digitizing tablet. This paper deals with automatic extraction and reconstruction of 3D topographic information from 2D terrain map. Several algorithms were developed in this work including contour segment finding algorithm and contour segment linking algorithm. The algorithm were tested using real 2D terrain map.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.3
• /
• pp.233-239
• /
• 2013

A 100 W fuel cell system using chemical storage method has been applied for a propulsion system of the SUAV(Small Unmanned Aerial Vehicle). A fuel cell and battery have been combined for both the small/light hydrogen generation control system and the hybrid power supply system. A small hydrogen generation device was implemented to utilize NaBH4 aqueous solution and dead-end type PEMFC system, which were evaluated on the ground and by the flight tests. The system pressurized at a 45kpa stably operates and get higher fuel efficiency. The pressure inside of the hydrogen generation control system was maintained at between 45 kPa and 55 kPa. The 100W fuel cell system satisfies the required weight and power consumption rate as well as the propulsion system, and the fuel cell system performance was demonstrated through flight test.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.74-80
• /
• 2022

The utilisation of small drones is becoming increasingly widespread particularly in the military sector. In this study, STANAG 4586, a standard interface for military unmanned aerial vehicles, was applied to a multicopter-type small drone to examine the suitability of the military system. To accomplish this, a small multi-copter vehicle was designed and manufactured, integrating a flight control computer, ground control system, and data link. Furthermore, flight control and ground control equipment software were developed by applying the STANAG 4586 interface, followed by HILS and flight tests.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.1
• /
• pp.55-71
• /
• 2013

By aircraft from Aviation regulations and institutional regulatory framework for ensuring the safety is secured. State-of-the-art aircraft, according to the type of development and diversification, modernization and new types of aircraft are operated. In particular, light aircraft and ultralight flying device such as the gyro-plane and unmanned flying devices is introduced a new device, and the device operates at these flight in accordance with the standards of the Aviation Act regulations may not occur often. Variety of light aircraft and ultra-light aircraft assembly, can be adapted for a person engaged in the business of aviation safety management and to perform the legal basis was established. Depending on the classification of newly introduced aircraft, the biggest change is the introduction of the concept of the LSA. In Korea, the various light aircraft are operating, but these aircraft range not clearly Aviation Regulations had difficulty in ensuring safety. This study examined the differences between international rules and regulations of Korea about the classification of aircraft. The LSA are included in aircraft categories internationally, but LSA will not be included in the aircraft categories, which is one of a range of powered flight device exists in Korea Aviation Act. Limit for maximum continuous power speed in a LSA, it is a limit on the right of the people who want using the high-performance plane. Also it is an international trend does not fit in, and is consistent with the intent of LSA manufacturer. Delete the content from a range of future aviation law revisions and light aircraft-related provisions to limit the maximum continuous power speed is considered to be suitable for the purpose of introducing the light aircraft industry. The laws and regulations set up in order to ensure the safety of ultralight aircraft categories existing in ultralight aircraft that exceeds the purpose of the introduction of LSA technology development at home and abroad, and is intended to reflect. These standards complement of aircraft operation is not appropriate for the situation unless the country is difficult to ensure the safety of operations. Also developed in other countries, the introduction of aircraft operating in the country, so many problems occur early revision is required.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.60-71
• /
• 2021

Propeller performance measurement system for commercial propeller was designed and applied to the wind tunnel test for 3 commercial propeller models with diameters of 30 inch. The thrust and torque of the propeller was directly measured by using 6-components balance installed on the rotating axis. The measurement system was validated by using wind tunnel balance calibration equipment. Propeller test stand including measurement and rotating system was validated by using QTP propeller. In the hovering condition, we compared the performance test results and the specifications of the commercial propeller provided by the manufacturer and confirmed that there are differences in the thrust and the torque. We measured the propeller performance with various wind speeds, propeller models and angles of attack and was summarized by thrust coefficients. We confirmed that the trend of the thrust coefficients was different in the low angle of attack and high angle of attack. An aerodynamics database that can be used for future aerodynamic design of an unmanned aerial vehicle was secured.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.997-1003
• /
• 2012

GNSS and ARS are the most common sensors in low-end UAVs. However, these sensors are vulnerable to built-in errors and cannot measure the body heading independently. The GNSS/INS cannot fully compensate the IMU errors in initial alignment process and rectilinear flights. For an unmanned helicopter, a magnetometer can be more useful than any other sensors to obtain heading information. However, the electric motor which drives small helicopter UAV keeps the magnetometer from reading the pure magnetotelluric vector. This paper shows the effects of electric motor on the magnetometer readings, and presents a method to compensate the effects. The results are verified with flight test data. The simulation and experimental results in this paper proves that aiding GNSS/INS with magnetometer increases observability and improves accuracy.

• Telecommunications review
• /
• v.24 no.4
• /
• pp.468-480
• /
• 2014

The current-generation avionics systems are based on a federated architecture, where an electronic device runs a single software module or application that collaborates with other devices through a network. This architecture makes the internal system architecture very complicate, and gives rise to issues of Size, Weight, and Power (SWaP). In this paper, we show that the partitioning defined by ARINC 653 can efficiently deal with the SWaP issues on small unmanned aerial vehicles, where the SWaP issues are extremely severe. We especially install the integrated mission system on real hexacopter and quadcopter and perform successful flight tests. The presented software technology for integrated mission system and software consolidation methodology can provide a valuable reference for other SWaP sensitive real-time systems.

• Convergence Security Journal
• /
• v.16 no.3_2
• /
• pp.25-32
• /
• 2016

Drone refers to an unmanned flying system according to the remote control. That is a remote control systems on the ground or a system that automatically or semi auto-piloted system without pilot on board. Drones have been used and developed before for military purposes. However there are currently utilized in a variety of areas such as logistics and distribution of relief supplies disaster areas, wireless Internet connection, TV, video shooting and disaster observation, tracking criminals etc. Especially it can be actively used in activities such as search or the structure of the disaster site, and may be able to detect the movement of people and an attacker using an infrared camera at night. Drones are very effective for private security.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.597-604
• /
• 2016

The aim of this study was to prevent the decrease in crop output by disease and insect pests and excessive spraying of agricultural pesticides by application uniformity. A 3m height and 15km/h speed is difficult to maintain with an unmanned helicopter for aerial application, which has been affected by the controlling habits and methods or environmental factors, such as changes in the wind. Therefore, in this study, an aerial application system was design to be attached to an unmanned helicopter, which can allow a controlled application width and spray rate automatically and verified experimentally using Rmax of MS-AVIATION. The size of agricultural land was 50 m2 and nine water sensitive cards were arranged at 1.25m intervals in 5 rows with each row having a 10m interval from the position of 5m. The unmanned helicopter was flying at speeds ranging from 7.2km/h to 17.6km/h and heights ranging from 2.32m to 3.47m. The proposed aerial application system allowed application uniformity by making a valid spraying area of 7.5 m2 with 46423 particles distributed on average.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.563-571
• /
• 2017

Test stand for altitude engine test of reciprocating engine was designed, manufactured and validated by preliminary test and simple calculation. These test stand designed to interface with Altitude turbo-shaft engine test facility of Korea Aerospace Research Institute. Many limiting condition for altitude test of reciprocating engine are assumed and test stand was developed to satisfy those limits. Test stand design specially focused on a altitude, Mach number and fuel temperature control for reciprocating engine altitude test with smaller air and fuel flow than turbo-shaft engine.