• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.575-577
• /
• 2013

Recently most of the hand-held smart devices have WiFi communication facility. This makes WiFi AP(access point) popular and cheaper than before. These circumstance launches some services with AP providing location based services and device control services. In this paper, we propose a AP based control system. The control system consists of AP's, AP controller and Android application program. The AP can collect MAC address information of the associated smart devices and control connected devices. The AP controller maintains DB for smart device position information and device control information. Finally Android application program provides users location based service and device control service.

• Journal of Internet Computing and Services
• /
• v.9 no.2
• /
• pp.43-50
• /
• 2008

In IEEE 802.11b wireless LAN, stations keep synchronization by receiving beacons being periodically sent by the AP (access point) when they run in low power mode. Beacon transmission is delayed if wireless channel is busy at a scheduled TBTT (target beacon transmission time), and stations must be awake until they receive the delayed beacon. In this paper, we propose a scheme that stations get their transmission delayed if they have little time for successful data transmission by the next TBTT. Beacon transmission without delay is guaranteed at every TBTT with this method so that the awake time of low power stations to receive beacon can be reduced. The proposed method is simulated and its characteristics ore described with the analysis of the results. The measured results in terms of beacon delay show some enhancement in energy consumption.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1434-1441
• /
• 2003

Recent technological advances in utilization and generalization of Internet have overcome some of the limitations of remote robot control range and real-time monitoring system. However, It needs Embedded system with control protocol or hardware which has avility to port the micro realtime operating system in robot control system communicate with remote controlled robot, because those system use the wireless LAM or Bluetooth as a network media. In this paper, we design and implement the wireless MODEM protocol and install it to the server system. Also, we implement a client system could control the remote robot through the server and we assure that this protocol and client/server system ate suitable for small size remote control system based on Internet.

• KIISE Transactions on Computing Practices
• /
• v.22 no.8
• /
• pp.381-386
• /
• 2016

Recently full-duplex communication in wireless networks is enabled by the advancement of self-interference cancellation technology. Full-duplex radio is a promising technology for next-generation wireless local area networks (WLAN) because it can simultaneously transmit and receive signals within the same frequency band. Since legacy medium access control (MAC) protocols are designed based on half-duplex communication, they are not suitable for full-duplex communication. In this paper, we discuss considerations of full-duplex communication and propose a novel full-duplex MAC protocol. We conducted a simulation to measure the throughput of our MAC protocol. Through the simulation results, we can verify that significant throughput gains of the proposed full-duplex MAC protocol, thus comparing the basic full-duplex MAC protocol.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.10
• /
• pp.724-739
• /
• 2009

This paper suggests the energy-efficient message delivery scheme and the software platform which exploits the multiple network interfaces of the mobile terminals and GPS in the current mobile devices. The mobile terminals determine the delivery method among 'direct', 'indirect', and 'WAN' based on the position information of itself and other terminals. 'Direct' method sends a message directly to the target terminal using local RAT. 'Indirect' method extends the service area by exploiting intermediate terminals as relay node. If the target terminal is too far to reach through 'direct' or 'indirect' method, the message is sent using wireless WAN technology. Our proposed scheme exploits the position information and, thus, power consumption is drastically reduced in determining handover time and direction. Network simulation results show that our proposed delivery scheme improves the message transfer efficiency and the handover detection latency. We implemented a message platform in a smart phone realizing the proposed delivery scheme. We compared our platform with other typical message platforms from energy efficiency aspect by observing the real power consumption and applying the mathematical modeling. The comparison results show that our platform requires significantly less power.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.143-151
• /
• 2008

In this paper, we have implemented a ubiquitous healthcare system that can measure and check human's health in anytime and anywhere. The implemented prototype are composed of both front-end and back-end. The front-end have several groups: environment sensor group such as temperature, humidity, photo, voice sensor, health sensor group such as blood pressure, heart beat, electrocardiogram, spo2 sensor, gateway for wired/wireless communication, and RFID reader to identify personal. The back-end has a serial forwarder to propagate measurment results, monitor program, and medical information server The implemented sensor node constructs a sensor network using the Zigbee protocol and is ported the tinyOS. The data gathering base node is linux-based terminal that can transfer a sensed medial data through wireless LAN. And, the medical information server stores the processed medical data and can promptly notify the urgent status to the connected medical team. Through our experiments, we've confirmed the possibility of ubiquitous healthcare system based on sensor network using the Zigbee.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.149-158
• /
• 2006

We proposed a method for improving a performance of TCP downstream between a desktop PC as a fixed host and a PDA as a mobile host in a wired and wireless network based on IEEE 802.11x wireless LAN. With data transmission between these heterogeneous terminals a receiving time during downstream is slower than that during upstream by 20% at maximum. The reason is that their congestion window size will be oscillated due to a significantly lower packet processing rate at receiver compared to a packet sending rate at sender. Thus it will cause to increase the number of control packets to negotiate their window size. To mitigate these allergies, we proposed two distinct methods. First, by increasing a buffer size of a PDA at application layer an internal processing speed of a socket receive buffer of TCP becomes faster and then the window size is more stable. However, a file access time in a PDA is kept nearly constant as the buffer size increases. With the buffer size of 32,768bytes the receiving time is faster by 32% than with that of 512bytes. Second, a delay between packets to be transmitted at sender should be given. With an inter-packet delay of 5ms at sender a resulting receiving time is faster by 7% than without such a delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.667-680
• /
• 2008

In this work, we present the results of our empirical study on 802.11 wireless LAN network traffic. We collect the packet trace from existing campus wireless LAN infra-structure. We analyzed four different data sets: aggregate traffic, upstream traffic, downstream traffic, tcp only packet trace from aggregate traffic. We analyze the time series aspect of underlying traffic (byte count process and packet count process), marginal distribution of time series, and packet size distribution. We found that in all four data sets there exist long-range dependent property in byte count and packet count process. Inter-arrival distribution is well fitted with Pareto distribution. Upstream traffic, i.e. from the user to Internet, exhibits significant difference in its packet size distribution from the rests. Average packet size of upstream traffic is 151.7 byte while average packet size of the rest of the data sets are all greater than 260 bytes. Packets with full data payloads constitutes 3% and 10% in upstream traffic and the downstream traffic, respectively. Despite the significant difference in packet size distribution, all four data sets have similar Hurst values. The Hurst alone does not properly explain the stochastic characteristics of the underlying traffic. We model the underlying traffic using fractional-ARIMA (FARIMA) and fractional Gaussian Noise (FGN). While the fractional Gaussian Noise based method is computationally more efficient, FARIMA exhibits superior performance in accurately modeling the underlying traffic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.623-631
• /
• 2013

Wireless LAN (WLAN) interface is one of the major sources drastically depleting the battery power of mobile devices such as smartphones and tablets. Most commercial mobile devices employ a power saving technique putting their WLAN interface into a sleep state when there is no network traffic, and thereby, save the battery power. However, since an access point (AP) just transmits the packet(s) received from a server to the corresponding mobile device immediately, it may cause a problem that the mobile device constantly remains in an awake state so that its battery power is rapidly drained. In this paper, we point out this problem and propose a new scheme that can save the mobile device's battery power with an adaptive packet scheduling at the AP side. From the experimental results based on a testbed, we found that the proposed scheme outperforms existing schemes over 50% in terms of power saving.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.2
• /
• pp.95-101
• /
• 2014

Scalable video coding (SVC) encodes multimedia data into a base layer and enhancement layers to cope with variable network conditions in an adaptive manner. In SVC, enhancement layers can be decoded only when the base layer is successively received. However, existing works on SVC transmissions in IEEE 802.11 WLANs do not fully investigate this characteristic and thus their performance can be degraded. In this paper, we propose a SVC-aware retransmission (SAR) scheme in IEEE 802.11 WLANs. The SAR scheme applies different retransmission policies for base and enhancement layers by obtaining the optimal number of frames to be retransmitted. As a result, the SAR scheme can reduce unnecessary retransmissions and minimize the transmission latency. Simulation results demonstrate that the SAR scheme can reduce unnecessary data transmission by 12.6% and the transmission latency by 6.6~19.1% compared to conventional retransmission schemes.