• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1202-1208
• /
• 2010

The prediction of the required pressurant mass for maintaining the pressure of propellant tanks during propellant feeding is an important issue in designing pressurization system. The temperature of pressurant fed into propellant tank is the critical factor in the required pressurant mass and is one of the most crucial design parameters in the development of pressurization system including designing the weight of pressurant tanks and the size of heat exchanger. Hence a series of propellant drainage tests by pressurizing propellant stored in a cryogenic propellant tank have been performed with measuring the temperature distribution inside ullage and the required pressurant mass according to the temperature condition of pressurant. Results shows that the required pressurant mass decreases as the temperature of pressurant increases. However, the rate of the actual pressurant mass to the ideal required pressurant mass increases.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.11-20
• /
• 1997

The passive noise control techniques used until now cancel the noise in terms of the characteristics of materials, which increase the mass and the dimension and have a limit that is effective only to attenuate the high frequency components of the noise. But the active noise control techniques developed in recent years have merits that they decrease the mass and the dimension and are effective to attenuating the low frequency noises. In this paper, the real-time active noise control system attenuating the engine booming noise in a car using the digital signal processing(DSP) techniques in terms of the principle of active noise control. The multiple-error filtered-x LMS(Least-Mean Square) algorithm is used as the adaptive algorithm for active noise control and is implemented using the DSP processor Motorola DSP56001 as a controller. According to the result that the experiments are performed for the engine as the RPM changes in a car, the noise attenuating performances are achieved in an overall car interior and is verified to be 20 dB higher for pure-tone and globally, 15 dB.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.696-701
• /
• 1999

The enzymatic hydrolysis of Castor oil for the mass production of ricinoleic acid was studied to find out the optimum conditions such as solvents and the weight ratio of substrate to enzyme. Three different lipases were tested for the hydrolysis of castor oil: lipase from Porcine Pancrease(lipsase PP), lipase from Candida cylindracea(lipase CC), lipase from Candida Rugosa(lipase CR). The poor mass transfer in water caused a low degree of hydrolysis of castor oil. To overcome this problem, organic solvents were used. Among organic solvents tested, hydrophobic solvents gave better results of hydrolysis than hydrophilic solvents. Organic solvents also lowered or changed the effect of pH. Isopropyl ether made complete hydrolysis of castor oil. The ratio of water to isopropyl ether and the ratio of weight ratio of lipase to castor oil were important for the hydrolysis of castor oil. At 30$^{\circ}C$ castor oil was completely hydrolyzed by 4 wt% of lipase in the mixture of isopropyl ether and water(1:1 in volume).

• Journal of the Korean Chemical Society
• /
• v.54 no.6
• /
• pp.799-808
• /
• 2010

In this study, we conducted a textbook analysis and a conceptual test in order to investigate misconceptions of preservice chemistry teachers in understanding motions of molecular gases. As a result, we found out that many of the general chemistry textbooks not only introduce motions of molecular gases by explaining basic conceptions and using simple models, but also omit the explanation on center of mass when dealing with rotational motion. The physical chemistry textbooks, however, mainly approach motions of molecular gases in terms of spectroscopy and use various models to explain more intensified concepts, referring the center of mass in rotational motions. Meanwhile, pre-service chemistry teachers' confidence and understanding in the motions of molecular gases were very low and pre-service teachers also had many misconceptions about them. We believe this is because they had a tendency to depend largely on their intuition based on the pre-conceptions and the visual materials in the textbooks.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.3
• /
• pp.385-397
• /
• 2020

This study investigated whether swimming exercises improves obesity through regulation of angiogenesis in white adipose tissue. Female mice with high-fat diets were divided into sham-operated group (Sham), ovariectomized group (OVX), and swim-trained ovariectomized group (OVX + Swim). Compared to the Sham, OVX increased body weight, adipose tissue mass and size of adipocyte. However, these factors (: such as body weight, adipose tissue mass and size of adipocyte) of OVX + Swim decreased compared with OVX. Compared with the Sham, OVX increased the mRNA expression of angiogenic activator and MMPs and decreased the mRNA expression of angiogenic inhibitors in white adipose tissue. But OVX + Swim decreased the mRNA expression of angiogenic activator and MMPs and increased the mRNA expression of angiogenic inhibitors in white adipose tissue, compared with the OVX. Theses results suggested that swimming exercises the angiogenesis in white adipose tissue, resulting to improve obesity in high-fat diet-fed female OVX mice.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.3
• /
• pp.353-358
• /
• 2011

This paper presents a virtual-legged walking model for bipedal robots and analyzes its fundamental RPY(Roll, Pitch, and Yaw) motion effects by simulation. For the purpose of identifying the motion effects of the bipedal walking, we assign some arbitrary trajectories both at the center of mass and at the center of pressure of the robot based on human walking. And then we verify the major moments to the roll, pitch, and yaw directions of the robot. As a result, it is shown that those motions are natural in the process of bipedal walking and they are deeply dependent on the step distance, the vertical level of the center of mass, and the acceleration of the robot. The importance of trajectory planning for the footstep location during a bipedal walking is finally addressed in terms of balance.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.4
• /
• pp.1-9
• /
• 2013

An active anti-ship missile decoy system was designed conceptually to analyze propulsion system requirements and feasibility to use a liquid bi-propellant rocket engine. Overall mass, size, and shape were assumed referring to specifications of Nulka which was developed by US and Australia in 1990s. The propulsion system was assumed to be a 1,000 N-class $H_2O_2$/kerosene rocket engine with a pressurized feed system. A three-degree-of-freedom optimal trajectory was calculated based on the assumptions, and mass budget was designed from the calculation results. It was found that the requirements for the propulsion system is that it shall be operated more than 100 sec; it shall be re-ignitable; it shall have a throttle capability of a range from 35% to 100% when the maximum thrust at sea level is 1,000 N.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.34-46
• /
• 2019

Obesity is frequently associated with metabolic disease. This study showed whether fenofibrate, a hypolipidemic agent, swimming and swimming combined with fenofibrate (: combination) regulate obesity, and whether combination is more effective than fenofibrate on regulation of obesity in high-fat diet-fed mice for 8 weeks. Both fenofibrate and swimming decreased obesity-associated factors such as body weight, adipose tissue mass, serum lipid levels and adipoctye size, compared with control mice. When mice were concomitantly treated with fenofibrate and swimming, combination reduced further the inhibitory effects on obesity-associated factors, compared with fenofibrate. Both fenofibrate, swimming and combination decreased serum glucose levels, compared with control mice. The evidence is presented herein that combination were effective to control obesity and serum glucose levels, suggesting that swimming combined with fenofibrate might contribute to inhibition of high-fat diet fed-induced metabolic syndrome.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.673-682
• /
• 2001

The use of resin composites has continued to increase over the last several years. In spite of their growing popularity, composites continue to exhibit a number of undesirable characteristics. One of the major deficiencies of composite restorative resins is their inadequate resistance to wear. Of the multitude of factors that have been associated with wear, subsurface degradation within the restoration is considered to be one. The aim of this study was to evaluate the resistance to degradation of four commercial composite resins in an alkaline solution. This solution with a high concentration of hydroxyl ions is a convenient medium for accelerated degradation of silane coupling and filler particles. The brands studies were Definite($Degussa-H\ddot{u}ls$ AG, Germany), Prodigy(Kerr, USA), Pyramid(Bisco, USA) and Synergy(Coltene, Swiss). Preweighed discs of each brand were exposed to 0.1N NaOH solution at $60^{\circ}C$. After 14 days they were removed, neutralized with HCl, washed with water and dried. Resistance to degradation was evaluated on the basis of following parameters : (a) mass loss(%)-determined from pre-and post-exposed specimen weights : (b) Si loss(ppm)-obtained from ICP-AE analysis of solution exposed to specimens; and (c) degradation $depth({\mu}m)$-measured microscopically (SEM) from polished circular sections of exposed specimens. The results were follows: 1. Mass loss of Synergy was $1.24{\pm}0.002%$, it was the highest, there was no significant difference among the materials. 2. The degree of degradation layer depth of Synergy was $107.83{\pm}2.52{\mu}m$, it was the highest, there was no significant difference among any other materials than Synergy. 3. There was no difference among the four materials in Si loss. 4. The correlation coefficient between mass loss and degradation depth was relatively high(r=0.06, p<0.05). 5. There was no coefficient correlation between Si loss and mass loss, the degree of degradation layer depth and Si loss. 6. When observed with SEM, destruction of bonding is observed between resin matrix and filler.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1209-1216
• /
• 2010

This paper dealt with an alternative for maximizing mass savings in spacecraft design by replacing conventional aluminum alloy housing used for various spacecraft avionics by composite materials. Key requirements were defined for the purpose of composite housing design with sufficient durability and various functionalities as well as more lightweight characteristics as compared with aluminum alloy widely-used for conventional electronics housing. Conceptual design was also carried out for manufacturing modular, lightweight composite electronic housing equipped with high thermal and electrical conductivities, EMI protection, and radiation shielding characteristics as well as excellent structural performance; feasibility of enhancing mass savings in spacecraft design was presented.