• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.714-722
• /
• 2014

In the previous study, a variety of wood-based panels was thermally decomposed to manufacture carbonized boards that had been proved to be high abilities of insect and fungi repellence, corrosion and fire resistant, electronic shielding, and formaldehyde adsorption as well as sound absorption performance. Based on the previous study, carbonized medium density fiberboard (c-MDF) was chosen to improve sound absorption performance by holing and sanding process. Three different types of holes (cross shape, square shape, and line) with three different sanding thickness (1, 2, and 3 mm) were applied on c-MDF and then determined sound absorption coefficient (SAC). The control c-MDF without holes had 14% of SAC, however, those c-MDFs with holes had 16.01% (square shape), 15.68% (cross shape), and 14.25% (line) of SAC. Therefore, making holes on the c-MDF did not significantly affect on the SAC. As the degree of sanding increased, the SAC of c-MDF increased approximately 65% on sanding treated c-MDFs (21.5, 21.83, and 19.37%, respectively) compared to the control c-MDF (13%). Based on these results, composite sound absorbing panel was developed with c-MDF and MDF (11 mm). The noise reduction coefficient of composite sound absorbing panel was 0.45 which was high enough to certify as sound absorbing material.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.507-517
• /
• 2010

This study estimated the amount of carbon stocks in harvested wood products (HWP) using accounting approaches suggested by 2006 IPCC guidelines and analyzed the impacts of different approaches on national greenhouse gas inventory and the forest sector in Korea. The change in carbon stocks was calculated at the level of semi-finished wood products, which cover sawnwood, wood-based panels, other industrial wood, paper and paperboard. An estimation of the changes in carbon stocks in HWP in use for the period 1970~2008 varied between -9,023 Gg $CO_2$/yr and 4,052 Gg $CO_2$/yr depending on the accounting approach used. The stock-change approach provided the most favorable results because Korea was a net importer of wood products. However, each approach generates different impacts on harvest, trade, the use of wood for energy production and recycling. When deciding its position on accounting approach, thus, the Government should consider future direction of national forest policies as well as the effect on national greenhouse gas inventory for the minimization of negative impacts resulting from its selection.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.87-93
• /
• 2009

Properties and chemical bonding of wood charcoal were investigated to understand the chemistry occurring in wood carbonization. From the pH changes of wood charcoal, it is revealed that it becomes acidic to weakly basic for charcoal carbonized at about $300^{\circ}C$, whereas it turns to basic at higher carbonization temperature higher than $600^{\circ}C$. Also, the ratio of carbon atoms in the charcoal was increased with increasing the carbonization temperature, while those of oxygen and hydrogen atoms. This tendency was significant when the carbonization temperature was increased up to $600^{\circ}C$ and the ratio changes of the atoms became stable at above $600^{\circ}C$. In the changes of chemical bonding, the ratio of C-C bonding was increased and those of C-O-H and C-O-R bonding was decreased significantly. It is considered that bondings connected to oxygen atoms tends to be broken, and the ratio of C-C bonding increased. Consequently, it is expected that this change may causes occurrence of new functional groups. In addition to that, it seems to be that the chemical bondings undergo the partial decomposition, formation, and recombination steps, Because ratio of C=O bonding tended to be increased or decreased by increasing the carbonization temperature. This understanding of chemical bond changes in charcoal can be a compensative consideration on the knowledges made only by physical parameters in the properties of micro-pore which has limited to explain the phenomenon. Also, it is considered that this can be treated as a basic knowledge for upgrading and development of use of wood charcoal.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.56-64
• /
• 2009

The purpose of this study was to investigate and develop an eco-friendly wood adhesive based on vegetable oil (especially soybean oil), the renewable and sustainable natural resources, using ozonification technology for the chemical structure modification. The soybean oil (SBO) was reacted with $O_3$ at the rate of 7.13 g/h for different times, 15 minutes, 30 minutes, 60 minutes, and 120 minutes. The investigation of the modified chemical structure of the ozonized SBOs were conducted using FT-IR, $^1H$-NMR, MALDI-TOF MS, and GC/MS. As ozonification time increased, the peak of the unsaturated double bonds was disappeared and aldehyde or carboxyl peak appeared because ozonification broke the oil into small molecules. The plywoods were made at $110^{\circ}C$ with 30 seconds/mm hot-press time using the different ozonized SBO/pMDI adhesives and were tested for the dry, wet, cyclic boil test according to the Korea Industrial Standard F3101 Ordinary plywood. The bond strengths gradually increased with increasing ozonification time. The weight ratio 1:1 (ozonized SBO/pMDI), all strengths in 15, 30 and 60 minuets, exceeded constantly the dry, wet, cyclic boiling standard requirement. The range of ozonification time and weight ratio can fulfil1 the requirment of the wet test standard were 30~60 minutes and more than 0.5 pMDI. From the comprehensive view on the results of above experiments, it could be confirmed through experiments that ozonized SBO/pMDI has characteristics of effective reactivity and wet stability showed as an excellent candidate of wood adhesive applications.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.43-49
• /
• 2007

Anatomical properties of Kenaf (Hibiscus cannabinus L.) planted in a reclaimed-land of Korea were examined to understand the growth characteristics by an optical and scanning electron microscopy. The samples of kenaf were taken from four positions of the stem (3, 35, 70, 105 cm above from the ground) in four growth periods (July. August, September, October) from seeding planted in the middle of May. Bast fiber, phloem rays, cortex parenchyma cells and sieve tube members were observed in phloem, and vessel elements, fibers and rays in xylem. Solitary and multiple radial pores existed in xylem. The cell types of ray parenchyma in radial section were procumbent, upright, and square. The intervascular pitting showed an alternate type. Xylem proportion, the number of bast fibers and dimension of phloem rays increased with increasing growth period, and decreased with increasing stem height. The proportion of multiseriate rays was higher than that of uniseriate and biseriate rays in xylem with increasing growth period. On the other hand, The proportion of multiseriate rays was lower than that of uniseriate and biseriate rays in xylem with increasing stem height.

• The Korean Journal of Mycology
• /
• v.18 no.1
• /
• pp.42-49
• /
• 1990

The cultural characteristics and some factors such as nutrient sources and supplements effecting on mycelial growth and density were investigated to study the possibility of an artificial cultivation of P. cocos. The optimum pH for P. cocos was 4.0-4.5. The optimal growth temperature ranged from $25^{\circ}C$ to $29^{\circ}C$. Myceial growth of P. cocos was better in SPD than PD media. Adding the nurient sources such as dextrose, yeast and potato infusion to pine extract media practically stimulated the mycelial growth and density of P. cocos comparing to pine extract media alone. When P. cocos was cultured on sawdust media added 3 different supplements composed of corn meal, rice bran and wheat bran, corn meal was the best and its percentage was 30 (w/w) for mycelial growth. On culturing in sawdust media added by varying the mixture ratio of them, the media mixed corn meal and wheat bran (3:1, w/w) supported more vigours for mycelial growth. In inoculation test to pine stem, the fungal growth was good in under or inside pine bark and xylem, but the sclerotium was not observed in the stem. Mycelial growth was also observed in central part of pine stem by cross section.

• KSBB Journal
• /
• v.24 no.3
• /
• pp.267-272
• /
• 2009

During a dilute acid hydrolysis, degradation products are formed or liberated by pre-treatment of lignocelluloses depend on both the biomass and the pretreatment conditions such as temperature, time, pressure, pH, redox conditions, and addition of catalysts. In lignocellulosic biomass, sugars can be degraded to furfural which is formed from pentoses and 5-hydroxymethulfurfural (HMF) from hexoses. 5-HMF can be further degraded, forming levulinic acid and formic acid. Acetate is liberated from hemicellulose during hydrolysis. Some decomposed compounds hinder the subsequent bioconversion of the solubilized sugars into desired products, reducing conversion yields and rates during fermentation. In the present work, samples of rapeseed strawwere hydrolyzed to study the optimal pretreatment condition by assessing yields of sugars and decomposed products obtained under different reaction conditions ($H_2SO_4$ 0.5-1.25% (w/w), reaction time 0-20 min and temperature range 150-220 C). A careful analytical investigation of acid hydrolyzate of rapeseed straw has not yet been undertaken, and a well-closed mass balance for the hydrolyzate in general is necessary to verify the productivity and economic predictions for this process.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.45-51
• /
• 2014

This is to study the effects of various pretreatment methods of agricultural residue, corn stover, and to compare the feature and pros and cons of each method including dilute sulfuric acid (DSA), soaking in aqueous ammonia (SAA), and ammonia recycle percolation (ARP). In order to convert corn stover to ethanol, various pretreatments followed by simultaneous saccharification and co-fermentation (SSCF) were tested and evaluated in terms of ethanol yield. With 3%, w/w of glucan loading using ARP-, DSA-, and SAA-treated solids, SSCFs using recombinant E. coli strain (ATCC$^{(R)}$ 55124) with commercial enzymes (15 FPU of Spezyme CP/g-glucan and 30 CBU/g-glucan enzyme loading) were tested. In the SSCF tests, 87, 90, and 78% of theoretical maximum ethanol yield were observed using ARP-, DSA-, and SAA-treated solids, respectively, which were 69, 58, and 74% on the basis of total carbohydrates (glucan + xylan) in the untreated corn stover. Ethanol yield of SAA-treated solid was higher than those of ARP- and DSA-treated solids. In addition, SSCF test using treated solids plus pretreated hydrolysate indicated that the DSA-treated hydrolysate showed the strongest inhibition effect on the KO11 strain, whereas the ARP-treated hydrolysate was found to have the second strongest inhibition effect. Bioconversion scheme using SAA pretreatment and SSCF can make the downstream process simple, which is suggested to produce ethanol economically because utilization of hemicellulose in the hydrolysate is not necessary.

• The Korean Journal of Mycology
• /
• v.40 no.3
• /
• pp.152-158
• /
• 2012

The lignocellulytic enzymes including a-amylase (EC 3.2.1.1), lignin peroxidase (EC 1.11.1.14), laccase (EC 1.10.3.2), xylanase (EC 3.2.1.8), ${\beta}$-xylosidase (EC 3.2.1.37), ${\beta}$-glucosidase (EC 3.2.1.21) and cellulase (EC 3.2.1.4) were extracted from spent mushroom compost (SMC) of Pleurotus eryngii. Different extraction buffers and conditions were tested for optimal recovery of the enzymes. The optimum extraction was shaking incubation (200 rpm) for 2 h at $4^{\circ}C$. ${\alpha}$-Amylase was extracted with the productivity range from 1.20 to 1.6 Unit/SMC g. Cellulase was recovered with the productivity range from 2.10 to 2.80 U/gf. ${\beta}$-glucosidase and ${\beta}$-xylosidase productivities showed lowest recovery producing 0.1 U/g and 0.02 U/g, respectively. The P. eryngii SMCs collected from three different mushroom farms showed different recovery on laccase and xylanse, cellulase. Furthermore, the water extracted SMC was compared to commercial enzymes for its industrial application in decolorization and cellulase activity.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.1
• /
• pp.117-126
• /
• 2017

This study was carried out to figure out on the changes of longitudinal salt movement in the soil through the soil according to the materials and thickness of salt prevent materials and the place of salt prevent at reclaimed land from the sea which is one of the most serious problems when tree planting. Changes of soil salinity were different depending on the seasons. In particular, the soil salinity was lower during the rainy season. But during the dry seasons including early summer before the rainy season and winter season, salinity was relatively higher. Among the seven interruption materials, crushed stone, dredged sand and wood chips showed better interruption effects than the other materials. The interruption effect of salt movement was highest in the both of side and bottom interruption treatment of salt movement than the side interruption treatment of salt movement or the bottom interruption treatment of salt movement. The thickness of the layer should be at least 20cm to prevent salinity effectively.