• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.41-46
• /
• 2001

The very large vessels like VLCC and container ship have been built recently and those vessels have smaller structural strength in comparison with the other convectional skips. As a result the fatigue destruction of upper deck occurs a frequently due to the springing phenomenon at the encountering frequencies. In this study, the hydrodynamic loads are calculated by three-dimensional source distribution method with the translating and pulsating Green function. A ship is longitudinally divided into 23 sections and the added mass, damping and hydrodynamic force of each section is calculated. focusing only on the vertical motion. Stiffness matrix is calculated by the Euler beam theory. The calculation is carried out for Esso Osaka.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.40-45
• /
• 2009

This study is analyzed by stress contour of automotive tire at contact on road surface. Maximum equivalent stress as 61200Pa is shown on the lower mid part in case of tire contacted on road surface. As the air pressure of tire increases, maximum total deformation as 5mm is shown on the side part of tire. It can be shown that the side part of tire is unstabilized. There is no load effect on tire at its upper and lower directions. When the moment applied on the side of tire is increased 1.4 times as its value, the value of maximum principal stress is increased 1.4 times. The stress at the tire is in proportion to the moment applied on the its side. The tire tends to incline toward its side by this moment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.4
• /
• pp.57-66
• /
• 2002

본 연구는 굽힘 하중하에서 탄성평판 구조 해석을 위한 경계적분방법 구성을 주목적으로 하고 체계적인 모듈화시스템 개발의 첫 이론 부분을 확립하였다. 굽힘 문제에서의 4개의 고유변수인 처짐, 기울기, 굽힘모우멘트, 상당 전단력의 항으로 경계적분방정식을 구성하였다. 물리적인 의미를 갖는 두 새로운 핵함수 도입으로 구성된 이들 적분방정식은 경계요소 구성시 나타나는 특이거동의 문제점을 간단한 두 탄성해에 의해 정규화 시켰으며 수치 적분 과정도 Cauchy 주치 적분 수렴성에서의 특별취급과는 달리 효율적으로 일반화시켰다. 경계적분식의 수치해석방법을 서술하였으며 집중하중하의 비대칭문제의 근사수치해를 도시하였다.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.2
• /
• pp.2649-2653
• /
• 1972

Many empirical research surveys have supported that Organizational Citizenship Behavior (OCB) is influnced by or closely related with leadership styles. The first purpose of this study is to review the relationship between 2 leadership styles(employee-centered style, job-centered style) and 2 OCB factors(altruism, conscientiousness) as a criterion variable, and the second and primary purpose is to test the moderating effects of structural factors(formalization, centralization) and personal factors(growth needs, sex, age, tenure, rank, occupation, school career) between 2 leadership styles and 2 OCB factors. For the analytical purpose of this article, Fisher's Z-transformation and SGC(split groups correlations) methods were introduced. Generally 2 leadership styles are found to influence on altruism and conscientiousness respectively. Out of 36 cases, only 2 cases were significant in moderating effects. Based on empirical results, there is no moderating effects in conscientiousness. But altruism is found to more closely related with employee-centered leadership in low centralized group than on high centralized group, and more closely related with job-centered leadership in low growth-needs group than in high growth-needs group.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1990.06a
• /
• pp.45-52
• /
• 1990

고도의 신뢰도를 요구하는 정밀기계의 보편화는 트라이볼로지 요소중에서 밀봉기능에 관련된 시일의 해석 및 설계가 커다란 관심사로 부각되었다. 특히 고속회전을 요하는 경우에 대한 회전 시스템의 동적 안정성은 대단히 중요하다. 미끄럼 접촉운동을 하고 있는 기계평면시일의 시일링 간극은 대단히 작기 때문에 시일의 접촉면에서 형상이 변화하게 되면 시일 성능은 커다란 영향을 받게 된다. 시일의 접촉표면 가공시 발생되는 평면도(flatness), 조립시의 회전축과 시일축 사이의 중심 맞추기의 어려움, 회전축의 자중량 등 때문에 발생되는 회전링 사이의 상대적인 경사도(misalignment)는 시일의 동적 불안정성에 영향을 준다. 또한 상대 접촉 운동면에서 경계 또는 고체 마찰에 의한 마멸의 진행은 시일의 코닝(coning) 현상을 일으킨다. 본 연구에서는 비압축성 유체가 온도의 영향을 받아 점도가 선형적으로 변화하는 경우에 대한 시일링 간극 내에서의 압력분포를 유한차분법을 이용하여 해석하였다. 여기서 얻어진 결과를 이용하여 시일의 축력과 모우멘트를 해석함으로써 시일의 동적 불안정성에 대하여 논하였다. 이 때 기계평면 시일의 형상은 코닝이 있고, 시일의 중심축이 경사진 경우를 고려하였다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.7-12
• /
• 2000

As the offshore oil fields are moved to the deep ocean, the oil production systems of FPSO(Floating production storage and offloading system) are building these days and so it is the most important to estimate the drift motion and damping effects the drift motion importantly. The components of damping consist of viscous, wave radiation effect and wave drift damping. It is need to estimate the wave drift damping exactly among them. The wave drift damping means the change rate of mean wave drift force with respect to the ship and ocean structures speed. In order to calculate this, the 3-Dimensional panel method used to translating and pulsating Green function is adopted. The calculation is carried out for series 60(CB = 0.7) vessel and the results are compared with other theoretical ones.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.834-838
• /
• 2003

Vibration of turbine is concerned with array of last moving blade at lower pressure turbine. When last moving blade at lower pressure turbine was replaced, we must consider mass unbalance problems of blades. If mass unbalance happened at rotor, it is impossible to operate turbine. In this paper, we have how to minimize the mass unbalance problems of last moving blade at lower pressure turbine.

• Journal of Welding and Joining
• /
• v.19 no.6
• /
• pp.652-657
• /
• 2001

To analyze and predict crack initiation position and propagation directions on the spot welded area are very important for strength design of the automobile body structure. It is necessary to test by method considering random loads with variable amplitude for strength design of vehicle body structure, because driving cars are actually subjected to random loads with variable amplitude in the road. Although this condition, nearly all tests haute been performed under constant load conditions in the laboratory because it is impossible to replay like an actual conditions. In this study, using in-plane bending type specimens, the overload factor affecting on the fatigue strength, crack initiation and propagation directions of spot-welded specimens have been studied.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.814-822
• /
• 1986

Flow patterns and its transitions in vertical two phase flow of air-water isothermal flow are identified objectively by void output signals and moments computed from the Probability Density Function which is associated with the statistical measurement for time average local void fractions using conductance probe. It has been shown that the probe output signals, PDF distributions and its moments are deterministic criteria of flow pattern and transition classification.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.20 no.1
• /
• pp.35-46
• /
• 1983

The hydrodynamic lift and moment acting on the bodies of revolution with pointed-end were calculated by the surface discrete vortex method. It was found, by direct computation, that the lift normal to the on-coming flow can be generated by introducing the shed-vortex to the unless otherwise purely potential model. The value of the destabilizing moment, which is called Munk moment, is reduced by the shed-vortex model, resulting in better agreement with the existing experimental values.