• Journal of the KSME
• /
• v.23 no.6
• /
• pp.448-458
• /
• 1983

보의 처짐(deflection of beam) 및 부정정보(statically indeterminate beam)의 문제는 수문이나 압력용기등을 비롯한 각종 구조물의 강도계산에서 설계자가 자주 부딪치는 문제이다. 일반적으로 분포하중이나 집중하중 또는 집중 모우멘트가 작용하는 보, 특히 부정정 보의 경우 해석하기 쉬운 방법을 찾아 모우멘트-면적법, 중첩법, 3-모우멘트의 방정식등을 사용하여 반력이나 반력 모우멘트, 처짐량 등을 계산하고 있다. 그러나 이들 방식들은 일률적으로 어느 경우에나 적용하기에 적합한 것은 아니고 복잡한 각종 정리나 공식들을 사용하여야 하며 공액보(conjugated beam)의 반력을 구한다든가, 선도의 면적을 구하기 위하여 힘든 계산을 행하여야 하는 등 쉽지 않아, 부정정 보를 풀어야 할 경우가 발생할 때마다 좀 더 쉬운 접근방법이 없을까 하는 애로를 느껴왔다. 그러던 차 특이함수를 도입하여 문제의 해결을 시도하여 본 바, 복잡한 공식들을 외울 필요 없이 규칙적이고 일률적인 방법으로 쉽게 문제의 해결이 가능하기에 여기 간단히 풀이 방법을 소개하고자 한다.

• Journal of the KSME
• /
• v.18 no.3
• /
• pp.57-61
• /
• 1978

안전벨브설비의 기계적설계와 해석에관련된 가장 중요한 고려사항중의 하나는 설비내의 임계점을 찾아내고 그 점에서의 모우멘트를 계산하는 것이다. 만약 굽힘모우멘트를 적절히 계산하지 않으 연 기술기순에 포함된 하중 및 응력기준에 합격할 수 없을 것이다. 이 모우멘트를 결정하는데 최 소한도 본 부록의 2부에 설명된 다음 하중들을 포함함이 바람직하다. 1. 열팽창 2. 사하중 3. 지진 4. 벨브 송출로부터의 반작용력 5. 기타 기계적하중 안전밸브설비의 핵석에서 교차점, 엘보우, 변이점등을 포함한 모든 중요단면 및 기타 관련된 배 관, 용기및 배관설비와 상호작용하는 그들의 지지점들을 포함함이 바람직하다. 안전밸브설비와 그 에 관련된 배관을 직선 또는 곡선 요소들을 연결된 하나의 통합된 질량계로서 모형화하는 것이 가장 적절하다.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.37-42
• /
• 1993

In this study of statistical characteristics of roll response of ships to narrow band exciting moment generated by passing white noise through a linear filter is investigated. The parameters of linear filler are determined by comparing the results of exciting moment generated through filler equation tilth those evaluated from JONSWAP spectrum. The statistical results of the roll response of shops are presented.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.6 no.3
• /
• pp.282-288
• /
• 1982

크랙탄성평판의 굽힘문제가 경계적분방정식으로 구성되었다. 자연변수인 변위, 수직기울기, 굽힘 모우멘트, 등가전단적과 크랙끝에서 응력의 성장율로 정의되는 응력확대계수들이 주변수로 포함 된다. 이 적분방정식들은 가역에너지 적분이론(Green-Rayleigh)을 기초로 크랙응력분포특성에 맞 게 발전되었으며 해당되는 핵함수들이 유도되었다. 등분석 모우멘트를 받는 중앙크랙이 있는 정 4각형 모형에 대한 응력확대계수가 계산되어 기존의 유한요소법의 해와 비교되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8A
• /
• pp.786-795
• /
• 2002

In this paper, we present a histogram and moment-based vidoe scencd change detection technique using hierarchical Hidden Markov Models(HMMs). The proposed method extracts histograms from a low-frequency subband and moments of edge components from high-frequency subbands of wavelet transformed images. Then each HMM is trained by using histogram difference and directional moment difference, respectively, extracted from manually labeled video. The video segmentation process consists of two steps. A histogram-based HMM is first used to segment the input video sequence into three categories: shot, cut, gradual scene changes. In the second stage, a moment-based HMM is used to further segment the gradual changes into a fade and a dissolve. The experimental results show that the proposed technique is more effective in partitioning video frames than the previous threshold-based methods.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.5 no.1
• /
• pp.53-62
• /
• 1987

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.99-101
• /
• 1986

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.4
• /
• pp.109-121
• /
• 1996

This paper presents how the input forces along the prismatic joints of a parallel manipulator are transmitted to the upper platform. In order to consider force transmission and moment transmission seperately the Jacobian matrix for parallel manipulators is splitted into two parts. Magnitudes of input forces on the six actuators at a given manipulator configuration which generate maximum/minimum output force with no moment generated on the platform are obtained through the singular value decomposition of a matrix involving the Jacobian. Similarly the directions of the input forces to obtain only the rotation of the platform have been analyzed. Using the singular values a simple equation for the volume of ellipsoid which is a good tool for manipulability measure is provided. Obtained results could be useful in determinimg design parameters like radius of plaform, angles between joints, etc. Simulations are porvided.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.223-228
• /
• 2007

In recent trends of the enlargement and specialization, container ship, LNCG, PCC and passenger ship which have relatively large hull and superstructure above the water line, are already being operated in the world It is very important information for the safety operation of these vessels to estimate the ship's performance under the specific wind condition while berthing, unberthing or low-speed sailing. In this paper, the effect of wind force and moment acting on the training ship HANNARA is investigated by using the numerical calculations. The results of drift angle and counter rudder angle with the relative wind direction and force, the critical wind velocity with the ratio of wind velocity and ship's speed and maximum heeling angle with the wind velocity are shown The presented results can be applied directly to T/S HANNARA in berthing maneuver and avoiding typhoons, and utilized as an educational materials.

• Composites Research
• /
• v.22 no.3
• /
• pp.66-73
• /
• 2009

Total thickness, areal density and mass moment of inertia of materials are important material factors for structural characteristics. In this work, a material-structural optimization was performed up to the maximum ballistic limit of multi-layered composite structures under high impact velocity followed by the investigation of the influence of these factors on an impact absorption performance. A unified model combined with Florence's and Awerbuch-Bonder's models was used in optimizing the multi-layered composite structure consisting of CMC, rubber, aluminum and Al-foam. Total thickness, areal density and mass moment of inertia were used for the optimization constraint. As shown in the results, the ballistic limit determined from a newly developed unified model was closely similar to the finite clement analysis. Additionally, the ballistic limit and impact absorption energy obtained by the optimized structure were improved approximately 16.8% and 26.7%, respectively comparing with a not optimized multi-layered structure.