• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.383-391
• /
• 1986

Mode shapes and natural frequencies of the bell type shell are analyzed numerically by the finite element method. The impulse hammer method and the Fast Fourier Transform analyzer are used for the experimental test. All types of mode shapes are expressed by the computer graphics. Numerical solutions are good agreement with the experimental results. The sustaining sound of the typical bell-type shell depend upon the first flexural mode (0-2 mode) and the second flexural mode (0-3 mode), and their mode shapes are independent upon thickness Dangjwas, holes, and added mass effects. Asymmetric effects by Dangjwas, holes and added mass give rise to beat frequencies, and the added mass is found to be most effective.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.15-19
• /
• 1990

기계신호를 처리분석하기 위하여 개발된 MSAMODAL 프로그램에 대하여 그 기능 및 특성을 설명한다. 모듈 프로그램중 신호 해석 모듈은 시간영역해 석과 주파수 영역해석, 확률 해석의 부모듈로 나뉘며 모우드 해석 모듈은 모 우드 매개변수 추출과 모우드 에니메이션 부모듈로 나뉘는데 각각에 대하여 간략한 설명과 함께 결과를 보인다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.306-311
• /
• 1995

원자로 내부구조물의 진동감시를 위한 신호로 노외 중성자 잡음을 선정하고 중성자 잡음에 실려 있는 진동모우드 성분을 신호간의 위상차에 근거하여 분리하는 새로운 방법을 제안하였다. 이 방법은 기존의 방법에 비해 계산속도가 빠르고 3개 이상의 신호에도 적용할 수 있다. 제안한 방법을 토대로 울진 1호기의 노외 중성자 잡음 신호를 채취, 분석하여 내부구조물의 진동특성을 밝히고 진동 감시의 대상이 되는 진동모우드를 분리하므로써 방법의 효율성을 검증하였다. 또 한 핵연료주기동안 주기적으로 신호를 채취, 분석하여 중성자 잡음신호의 특성이 한 핵주기동안 점차 증가하는 경향을 갖는다는 것을 밝혔다.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.420-427
• /
• 1993

Dielectric thin film mirrors are embedded in multimode and single-mode fibers by a fusion splicing technique. The fibers with $45{\circ}$ angled embedded mirrors serve as ultra-compact directional couplers with low excess optical loss of 0.2 dB for multimode and 0.5 dB for single mode at 1.3 ${\mu}m$ and excellent mechanical properties. The reflectance is wavelength dependent and strongly polarization depencient. Far-field scans of the reflected output power measured with a white-light source show a pattern which is almost circularly symmetric with aspect ratio of 1.09 at 5% of the peak power. The splitting ratio in a multimode coupler measured with a diode laser source is much less dependent on input coupling conditions than in conventional fused biconical-taper couplers, indicating that these couplers are less susceptible to modal noise occuring in optical fiber communication systems. Spectral properties of multilayer internal mirrors normal to the fiber axis have been investigated experimentally, and a matrix analysis has been used to explain the results.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.1 s.44
• /
• pp.83-91
• /
• 2000

The first Procedure to identify structural system by using measured data is transformation of data to frequency domain and try to recognize modal characteristics in graphical condition. Those methods are doubted about the reliability to the civil structures, especially bridges which has coupled and close modal characteristics. In this paper, feasibility of time domain modal Identification methods were examined and applied double least square method to overcome bias characteristics of the identification methods. To show the advantage of proposed method, simulation were carried out for mass-spring model. And to examine the usage of the method in realistic case, sensitivity of the methods to noise was performed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.409-420
• /
• 2002

This paper proposed a technique of structural re-analysis for the evaluation of dynamic responses of bridge structure under moving loads using experimental modal results. For successful structural re-analysis, it is required to have accurate estimation techniques of the modal characteristics of bridge structures. The natural frequencies and mode shapes were identified by direct fourier analysis techniques and damping ratios by the random decrement method, respectively. An interpolation method was also proposed for the extension of mode shape measured on limited DOFs. Second, the structural reanalysis was performed using moving mass model and identified modal parameters. The results from the reanalysis show that the proposed technique is very reasonable to evaluate the actual behavior of bridge structures under moving loads.

• Korean Journal of Crystallography
• /
• v.13 no.2
• /
• pp.69-72
• /
• 2002

The interlaminar problems near the free edge of composite laminates are analyzed in this paper. CFRP specimen (［+40/-40］s) and interleaved specimen (［+40//-40］s) with non-woven carbon tissue (NWCT) are discussed under tensile loading condition. The symbol “//”means that the NWCT is located between the CFRP interfaces. The NWCT has carbon short fibers which are discretely distributed with the in-plane random orientation. It was reported/sup 3)/ that the Mode Ⅱ interlaminar fracture toughness of CFRP laminates with NWCT is increased largely and the Mode I interlaminar fracture toughness is not changed significantly. Mode Ⅲ interlaminar fracture toughness is also an important factor in composite structures. But it is not easy to experimentally investigate the Mode Ⅲ interlaminar fracture toughness. The objective of this work is to study the effect of the NWCT and to fundamentally understand the Mode Ⅲ interlaminar shear characteristics of laminated composites with NWCT in the vicinity of a free edge by using finite element method analysis.

• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.90-100
• /
• 1993

A computer routine for personal computer(PC/AT class) is developed to analysize the mode characteristics of silica based optical waveguides whose cross sections are of semi circular and other typical shapes. The basic algorithm used in the routine is to convert the wave equation into a matrix equation by expanding the wave function in terms of simple harmonic functions. The matrix elements are a set of overlap integrals of sinusoidal funtions with appropriate weight given by the distribution of refractive index over the waveguide cross section. The eigenvectors and eigenvalues of the matrix is then computed via diagonalization. We explain some practical problems that arises when implementing the algorithm into the routine. By using this routine we analyze the mode characteristics of silica based optical waveguides of semi circular and some other typical cross sections.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.461-471
• /
• 1989

For the mixed-mode crack problems the direction of crack growth, the crack path and the rational representation of fatigue crack growth rates should be studied to predict fatigue life and safety of structures. In this study, a round specimen which produce nearly identical effects in all loading directions is proposed to make an easy measurement of initial direction of crack growth. The mode I and mode II stress intensity factors of the specimen were calculated using finite element method, in which the square root singular stresses at the crack tip are modeled by means of four rectangular quarter-point eight-noded elements surrounding the crack tip. Experimental results for high strength aluminum alloy showed that the direction of mixed-mode crack growth agree well with maximum principal stress criterion as well as minimum strain energy density criterion, but not with maximum shear stress criterion. From data of fatigue crack growth rates using crack geometry projected on the line perpendicular to the loading direction it is easily established that mixed-mode fatigue crack growth in 5083-H115 aluminum alloy goes predominantly with mode I crack growth behaviors.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.127-134
• /
• 2001

구조물이 점점 더 커짐에 따라 그들을 분석하고 설계하는 것이 더 복잡해지고 더 많은 시간이 요구된다. 현재 사용되는 단일 프로세서를 가진 컴퓨터는 그와 같은 구조물을 해석하기에 효율적이지 못하다고 여겨진다. 이 논문에서는 거대규모의 구조물을 분석하기 위하여 컴포넌트 모우드법(CMM)과 메시지전달 시스템(MPI)을 이용함으로써 표준 병렬기법과 고도로 효율적이고 이식성 있는 프로그램을 새로 개발하였다. 이 연구에서는 구조물의 동적 해석을 위해 병렬처리기법을 지닌 컴퓨터 프로그램이 제시되고 새로 개발된 프로그램이 신뢰도를 갖고 있다는 것이 입증된다. 또한 이 프로그램은 상업용 프로그램보다 훨씬 처리속도가 빠르고 병렬처리 컴퓨터에서도 사용될 수 있다는 것을 보여준다.