• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.340-345
• /
• 2009

There are a number of situations where the oral mucosa can be sucked or pressed to produce relatively banal but clinical distinctive changes. The labial and buccal mucosa and tongue may develop protuberances in areas where a tooth is missing or extra space is present. The mucosa is pressed and sucked into these spaces, thus leading to the development of a fibrous hyperplasia. This case report describes the management of fibrous hyperplasia in oral mucosa. Fibrous hyperplasia can be formed by habitual pressure or suction in oral mucosa. Treatment of fibrous hyperplasia consists of simple excision and, if feasible, elimination of the cause. And habit control is a important factor for preventing recurrence.

• Journal of the Korean Vacuum Society
• /
• v.22 no.3
• /
• pp.156-161
• /
• 2013

We fabricated transparent conductive electrodes with silver (Ag) nanofibers by electrospinning process. Ag nanofibers have high aspect ratio and fused junctions which result in low sheet resistance. Electrospinning is a fast and efficient process to fabricate continuous one-dimensional (1D) nanofibers. Ag/polymer ink were prepared in polymer matrix solution by a sol-gel method. Then, Ag/polymer nanofibers precursors are heated at $200{\sim}500^{\circ}C$ in air for 2 h to eliminate partially the polymers. The topographical features of the Ag nanofibers were characterized by FE-SEM, and the electrical property was analyzed through I-V measurement system. Finally, optical property was measured using UV/VIS spectroscopy. The transparent conductive electrodes with Ag nanofibers exhibited a sheet resistance (Rs) of $250{\Omega}/sq$ at a transparency (T) of 83%. Transparent conductive films, contain the Ag nanofibers as conductive materials, have good electrical, optical, and mechanical properties. Therefore, it is expected to be useful for the application of flexible display in the future.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.3 s.55
• /
• pp.119-126
• /
• 2009

This study investigated the fire resistance of RC columns applying Fiber addition method, Fire board attaching method, and Fire proof sparying method. The results were summarized as following. The test showed that increase of fiber content, as expected, decreased the fluidity of fresh concrete, but for the types of fiber, the specimens containing nylon(NY) was favorable. The incline of fiber content also affected on the air content of concrete, which the specimens adding polypropylene(PP) fiber was the lowest, followed by a less decrease in polyvinyl alchhol(PVA) and then NY respectively. For the compressive strength at 28days, it was over 50MPa and showed slight increasing tendency by rising fiber contents. After the fire test completed, control concrete exhibited the severe demage, while the specimens containing more than 0.05vol.% of PP and NY was able to protect from spalling. In the case of splay, the partly spalling occurred at the all finishing material, however the RC columns were protected from spalling. For the methods attached with boards, all RC columns were protected except the dry attaching method. The reduced weight ratio was favorable because it was below 8 % except for plain concrete.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.4
• /
• pp.733-739
• /
• 2012

Objectives : To Compare the degree of survival rate of gingival fibroblasts, which is concerned with teeth adherence based on the type of avulsed tooth's storage solution. Methods : Different media gingival fibroblasts were stored in Dulbecco's modified Eagle's medium(DMEM), Hank's balanced salt solution(HBSS), milk, saline, and green tea in for 1, 2, 3 hours. And, MTT assay was conducted to compare survival rate of human gingival fibroblasts. Results : 1. The survival rate of gingival fibroblasts in DMEM and HBSS was higher than thoes in other storage media( Milk> Saline> Green tea). 2. The survival rate of gingival fibroblasts in milk, saline and green tea decreased as time passed. 3. Because of low osmotic pressure, green tea showed decrease of survival rate of gingival fibroblasts. Conclusion : DMEM and HBSS were the most effective storage media for gingival fibroblast. Among milk, saline, green tea, milk is most effective storage media for keeping gingival fibroblasts. Milk is recommended for storage media of avulsed tooth for keeping viability of cells.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.12 s.138
• /
• pp.1625-1631
• /
• 2004

The purpose of this study was to investigate dyeing properties of cotton fabrics by American fleabane extract. Effect of dyeing condition on dye uptake and effect of mordanting on dye uptake, color change and colorfastness were explored. Its affinity to cotton fiber was considerably lower than wool, and its hydrogen bonding was involved in the absorption of American fleabane colorants to cotton fiber. K/S value of pre­mordanting was higher than sim-mordanting or post-mordanting. Except that Sn mordanted showed high K/S value, it did not significantly increase. American fleabane produced mainly yellowish color on mordants and mordanting method. Cotton fabrics showed generally high colorfastness except colorfastness to washing.

• Journal of Veterinary Clinics
• /
• v.30 no.6
• /
• pp.403-408
• /
• 2013

The objective of the present study is to detect the effect of ${\beta}$-glucan originated from Aureobasidium on the proliferation and collagen production in human dermal fibroblast cells with wound repopulation in vitro. The proliferative effects were assessed using a MTT assay as well as cell counts at 24 and 48 hr after treatment. Hydroxyproline was measured as an index of procollagen production with reverse-phase high pressure liquid chromatography. Oncostatin M was used as a reference agent. In glucagon treated group, dose-dependent and significant increase of optical density or fibroblast cell numbers was demonstrated, when compared with those of control from 0.1 mg/ml concentration. In addition, the numbers of cells which had migrated into the wound defects were more significantly and dose-dependently increased than those of non-treated control. However, no meaningful effects on the procollagen production were observed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.454-458
• /
• 2017

Fibroadenoma are one of the most common benign tumors of the breast in young women. Fibroadenoma may be associated with fibrocystic change, proliferative epithelial changes, and extremely rarely with carcinoma. We report here two cases of malignancy arising from a breast fibroadenoma. The patients were 19 and 51 years old and presented with a lump of recent onset. A 19-year-old female patient was diagnosed with mass excision at another hospital, and re-excision was performed at the hospital. Ultrasonography and cytologic examination revealed fibroadenoma and malignancy in a 51-year-old female patient, who was treated with wide excision. The pathological report of the two cases was revealed as DCIS in a fibroadenoma. Because carcinoma arising within a fibroadenoma is so rare, there are few reports of its characteristics or guidelines for treatment. Careful analysis of the unusual carcinoma arising within a fibroadenoma of the breast led to appropriate diagnosis and treatment of various types of lesions. Herein, we report two cases of DCIS arising within a fibroadenoma of the breast and provide a review of the literature.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.113-119
• /
• 2009

This study is to investigate the fundamental and fireproof qualities of high strength concrete corresponding to changes in the curing factors and the PP fiber ratio. The results were as follows. For the fundamental characteristics of concrete, the fluidity was reduced in proportion to the increase in the PP fiber ratio. The compressive strength was somewhat reduced according to an increase in the PP fiber ratio. However, it had the high strength scope of more than 60 MPa at 7 days and of more than 90 MPa at 28 days. On the spalling mechanism followed by changes of the water content ratio, spalling was prevented in all combinations, except the specimen without PP fiber and subjected to 3.0% of moisture contents. When spalling was prevented at that time, the residual compressive strength ratio was 22%~41% and the mass reduction ratio was 5%~7%, which was relatively favorable. As the spalling mechanism corresponds to changes in the curing method, spalling was prevented in concrete with a PP fiber mixing ratio of more than 0.05% in the event of standard curing, and in concrete with a PP fiber mixing ratio of more than 0.10% in the case of steam curing and autoclave curing. In these cases, when spalling was prevented, the residual compressive strength ratio was 23~42% and the mass reduction ratio was 7~11%. In these results, the ease of spalling prevention in high strength concrete was inversely proportional to the water content ratio. Depending on the curing method, spalling was prevented in concrete with over 0.05% PP fiber with standard curing and in concrete with over 0.1% PP fiber with steam curing and autoclave curing.

• Journal of the Korean Arthroscopy Society
• /
• v.5 no.1
• /
• pp.13-16
• /
• 2001

Purpose : To evaluate the types of the fibrous scar formation around graft after ACL reconstruction. Materials and Methods : Between Nov 1997 and Jun. 1999, the second look arthroscopy was performed on 15 knees of 14 patients. We evaluated the changes around graft and measured the tunnel position that the tibial tunnel position as a percentage along the length of the tibial plateau from the anterior-to-posterior as seen on a lateral radiograph and the femoral tunnel position as a percentage along Blumensaat's line from anterior-to-posterior as seen on a lateral radiograph. Results : The tibial tunnel position was from $27\%\;to\;58\%(mean\;41\%)$ and the femoral tunnel position was from $58\%\;to\;83\%(mean\;76\%)$, so the tunnel position was ideal in almost cases. By arthroscopic findings, the grafts were not impinged in all cases and tile fibrous scar was formed between intercondylar notch and graft in almost cases except 3 cases. The types of fibrous scar formation were 6 cases of fibrillated fiber and 5 cases of fibrous nodule and 1 case of fibrous band. Conclusion : There was no impingement on graft in all cases and various types of fibrous scars were formed around grafts.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.335-347
• /
• 2000

치주질환의 진행에 따른 치주조직파괴에 있어 치주조직내 다양한 세포외기질성분을 분해하는 matrix metalloproteinase-3(MMP-3)는 염증반응에 관여하는 세포들로부터 분비된 interleukin-$1{\beta}$(IL-$1{\beta}$)에 의해 유도될 수 있다. 이전 연구에서 치주인대세포에서의 MMP-3 생성이 tetracycline 및 tetracycline 유도체에 의하여 억제될 수 있음이 보고되었다. 이 연구의 목적은 metronidazole 및 doxycycline-HCl을 적용한 후 치은섬유아세포에 IL $1{\beta}$를 적용하여 MMP-3의 생성을 유도한 후 이들 약물들이 치은섬유아세포의 MMP-3 생성에 미치는 영향을 조사하기 위한 것이다. 건강한 성인으로부터 치주질환이 이환되지않은 상악 제2대구치 후방의 건강한 치은결합 조직을 절취하여 치은섬유아세포를 배양한 후 다양한 농도의 metronidazole (10-$200{\mu}g/m{\ell}$) 및 doxycyline-HCl(10-$200{\mu}g/m{\ell}$)을 각각 적용하여 1시간 배양하고 proMMP-3의 활성화를 유도하기 위하여 25ng/ml의 IL-$1{\beta}$을 투여한 후 24시간 배양하여 배양된 세포의 상층 배양액을 추출하고 proMMP-3 ELISA kit를 이용하여 비색정량하였다. 비색정량을 통하여 얻어진 자료들은 독립 t-test와 일원분산분석(ANOVA) 및 사후검정으로 Duncan test를 시행하여 다음과 같은 결과를 얻었다. 1. Metronidazole 경우 10-$200{\mu}g/ml$의 모든 농도군에서 proMMP-3의 활성도가 억제되었다(p<0.05). 2. Doxycycline-HCl의 경우 $100{\mu}g/ml$ 이하의 농도군에서는 proMMP-3의 활성도가 억제되었으나(p<0.05), $200{\mu}g/ml$ 농도에서는 proMMP-3의 활성도가 상승되었다(p<0.05). 3. Metronidazole과 doxycycline-HCl의 대조군에 대한 각 실험농도군의 proMMP-3 생성의 감소비율 비교시 모든 농도군에서 metronidazole이 doxycycline-HCl보다 더 높은 감소율을 보였다. 이상과 같은 결과는 metronidazole(10-$200{\mu}g/ml$)이 doxycycline-HCl($100{\mu}g/ml$ 이하) 보다 더 광범위한 혈중농도에서 IL-$1{\beta}$의한 인체치은섬유아세포내 MMP-3의 활성도를 효과적으로 억제할 수 있음을 시사하였다.