• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.271-273
• /
• 2020

SiC 기반의 전력용 반도체 소자들은 스위칭 속도가 빠르고 높은 차단 전압을 가져 dv/dt가 크다. 중전압 이상에서 게이트 드라이버에 절연된 전원 공급을 하기 위해 소형 변압기가 사용된다. 하지만 변압기의 1, 2 차 권선 사이에 수십 pF 이상의 기생 커패시턴스가 존재하며, 높은 전압을 고속으로 스위칭 하게 될 경우 기생 커패시턴스를 통해 제어부로 공통 모드 전류가 흘러 오작동을 야기할 수 있다. 본 연구에서는 변압기를 대체하여 무선전력전송 코일을 이용한 게이트 드라이버용 절연된 전원공급 장치를 제안한다. 무선전력전송 코일 사이의 거리를 수 mm 이상 이격시켜 코일 사이의 기생 커패시턴스를 1 pF 이하로 줄이고 높은 절연 특성을 가질 수 있다. 무선전력 전송의 공진 토폴로지는 직렬-병렬을 선택했고, 2 MHz에서 높은 효율을 갖도록 I-core 코일을 2.2cm × 1.5cm × 1.7cm으로 제작해 검증했다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.37 no.1
• /
• pp.21-28
• /
• 2017

Eddy current array (ECA) technology provides the ability to electronically scan without mechanical scanning for a footprint of probe that consists of several eddy current coils arranged side-by-side and two dimensionally. Compared to single-coil eddy current technology, the ECA technology has a higher inspection speed and reliability because a large area can be covered in a single-probe pass and the obtained images can facilitate data interpretation. In this study, we developed an eddy current array probe with $2{\times}16$ coil arrays and a multiplexer that can select transmit-receive coils sequentially and operate in transmit-receive mode. Surface inspection was performed using this probe for specimens that had various flaws and the characteristics of transmit-receive mode ECA technology was studied through an analysis of the obtained eddy current signals and C-scan images.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.1
• /
• pp.1-10
• /
• 1998

In the dynamic soil-structure interaction(SSI) analysis, numerous uncertain parameters are involved. They include the uncertainties in the definition of input motions, modeling of soil-structure interaction systems. analysis techniques, etc. This paper presents the results of parametric studies of the seismic responses of a reactor containment structure built on the viscoelastic layered soil. Among the numerous parameter, this study concentrates on the effects of definition point of the input motion, embedment of structure to the base soil, thickness of the top soil layer, and rigidity of the base soil. The substructure method using frequency independent impedances is adopted. The method is based on the mode superposition method in time domain using the composite modal damping values of th SSI system computed from the ratio of dissipated energy to the strain energy for each model. From the study results, the sensitivity of each parameter on the earthquake responses has been suggested for the practical application of the substructure method of SSI analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.198-203
• /
• 2002

A fuzzy logic controller design technique is proposed to apply for the control of flexible system under irregular disturbance. The fuzzy rules of $\ulcorner$Mode Selecting Fuzzy Controller$\lrcorner$ are constructed using displacement, velocity information and modal characteristics of the system. The frequency information of flexible system is picked up from $\ulcorner$Mode Selecting Unit$\lrcorner$ based on Fast-Fourier transform algorithm. Experiment is conducted to verify the proposed theoretical approach, Piezo ceramic and laser accelerometer are used as actuator and sensor in the experiments respectively

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.326.1-326
• /
• 2002

A fuzzy logic controller design technique is proposed to apply to the control of flexible system under irregular disturbance. The fuzzy rules of $\ulcorner$Mode Selecting Fuzzy Controller$\lrcorner$ are constructed using displacement, velocity information and modal characteristics of the system. The frequency information of flexible system is picked up from $\ulcorner$Mode Selecting Unit$\lrcorner$ based on Fast-Fourier transform algorithm. Experiment is conducted to verify the proposed theoretical approach. (omitted)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.161-174
• /
• 1996

Addressed in this paper is performance analysis of the maximum-likelihood code acquisition technique for slotted-mode preamble search in the CDMA reverse link. The probabilities of detection, miss, and false alarm are derived analytically for a multiple $H_{1}$ cell case in a frequency-selective Rayleigh fading channel, based on the statics of the CDMA noncoherent demodulator output. the probability density function of the decision variable consisting of successive demodulator outputs is also derived by considering the fading characteristics of the received signal for both single and dual antenna cases. The performance of the code acquisition technique is evaluated numerically with an emphasis on investigating the effects of post-detection integration, fading rate, and antenna diversity on the detection performance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.60-64
• /
• 2007

In this paper, we designed FFT for European DTV and implemented system with Stratix EP1S25F672C6 FPGA At the implemented FFT, we used SIC architecture. SIC architecture is composed of algorithm-specific processing element, RAM memory, registers, and a central or distributed control unit. Designed FFT was acceptable either 2K or 8K point FFT processing, and is selectable guard interval such as 1/4, 1/8, 1/16, 1/32. Consequently, it was suitable for the standard of DVB-T(Digital Terrestrial Video Transmission System) specification. It resulted in 12% of total logic gate and 53% of total memory bit in Stratix device.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.155-160
• /
• 2024

The polarization-selective beam splitter grating can be widely used in numerous optical information processing systems. In this paper, to design a high-efficiency plasma polarization beam splitter (PBS), the structure composed of an Ag metal layer in Littrow mounting is implemented. To achieve high diffraction efficiency in the transmitted 0th-order TE polarization and the reflected 0th-order TM polarization, the grating depth and grating ratio of presented PBS is optimized by using rigorous Modal Transmission-Line Theory. From the optimized results, PBS has advantages of wide band properties for incident wavelength and angle, and the efficiency is higher than 95% for both TE and TM polarization. Therefore, this highly efficient PBS wideband grating with high extinction ratio can be used as an excellent optical diffraction device.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.147-153
• /
• 2009

In this paper, FSS(Frequency Selective Surface) using defect mode characteristic is proposed. The unit cell using defect mode characteristic of the proposed FSS is offered lower resonant frequency in the same cell size. The number of suitable array is optimized 13 by 13. Also, the patch antennas operated in WCDMA(Wideband Code Division Multiple Access) Tx band and Rx band are designed for the comparison. The gain value of proposed FSS-1 complex structure (the patch antenna of Tx band and FSS) is improved 3.3 dB from 9.98 dBi to 13.28 dBi in Tx band. The gain value of proposed FSS-2 complex structure(the patch antenna of Rx band and FSS) is improved 5.53 dB from 9.81 dBi to 15.34 dBi in Rx band. Also the measured impedance bandwidth($VSWR{\leq}2$) of manufactured $13{\times}13$ array antenna is from 337 MHz(1.87 to 2.21 GHz). The measured radiation gain is 11.39 dBi(1.94 GHz), 13.11 dBi(2.05 GHz), 11.09 dBi(2.14 GHz). The measured radiation efficiency is 81 %. Because the proposed FSS structure has more higher gain, it will be applied to antenna of WCDMA repeater system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.66-73
• /
• 2002

As floating-point operations become widely used in various applications such as computer graphics and high-definition DSP, the needs for fast division become increased. However, conventional floating-point dividers occupy a large hardware area, and bring bottle-becks to the entire floating-point operations. In this paper, a high-performance and small-area floating-point divider, which is suitable for embedded processors, is designed using he series expansion algorithm. The algorithm is selected to utilize two MAC(Multiply-ACcumulate) units for quadratic convergence to the correct quotient. The two MAC units for SIMD-DSP features are shared and the additional area for the division only is very small. The proposed divider supports all rounding modes defined by IEEE 754 standard, and error estimations are performed for appropriate precision.