• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1667-1675
• /
• 2010

This paper presents a high efficiency DC-DC buck converter for mobile device. The circuit employes simplified compensation circuit for its portability and for high efficiency at stand-by mode. This device operates at PFM mode when it enters stand-by mode(light load). In order to place the compensation circuit on chip, the capacitor multiplier method is employed, such that it can minimize the compensation block size of the error amplifier down to 30%. The measurement results show that the buck converter provides a peak efficiency of 93% on PWM mode, and 92.3% on PFM mode. The converter has been fabricated with a $0.35{\mu}m$ CMOS technology. The input voltage of the buck converter ranges from 2.5V to 3.3V and it generates the output of 3.3V.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.30-37
• /
• 2015

The estimation of system damping parameter of the response signal with lower natural frequency and higher damping parameter from free vibration is affected by the wavelet center frequency. This study discusses these considerations in the context of the wavelet's multi-resolution character and includes guidelines for selection of wavelet center frequency. The experiment with H-Beam and numerical examples with respect to three cases (i)single mode, (ii)separated modes and (iii)close modes demonstrate the validity of method to improve the accuracy of the estimated damping parameter. The localization of the corresponding scale for the total scales is determined by the natural frequency of the analysing mode and is affected by the wavelet center frequency. Thus, the reliability for the accuracy of the estimated damping parameter can be improved by the corresponding scale of the natural frequency for the analysing mode is localized at the half of the total scales.

• Journal of Advanced Navigation Technology
• /
• v.14 no.3
• /
• pp.446-451
• /
• 2010

This paper addressed an another scheme of distortion estimation method based on simplified inverse quantization in H.264/AVC. The distortion is calculated by the difference of coefficient between quantized transform coefficients and that of inverse. In general, these process included such transforms as discrete cosine transform(DCT), quantization, inverse quantization(IQ), and Inverse DCT(IDCT). In proposed approach, IQ as well as IDCT process are skipped because of replacing a couple of approximated formulas. Some simulation have been conducted and it showed that the PSNR was almost the same, and reduced the rate-distortion optimization(RDO) mode decision time of 8~15% in comparison with conventional method.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.30-31
• /
• 2000

파장 분할 다중 방식을 사용하는 모든 전광 통신망은 파장 재사용과 routing를 위해 반드시 파장 변환기를 필요로 한다. 본 논문에서는 반도체 광 증폭기와 반도체 레이저를 수평 결합시킨 새로운 구조를 제안함으로써 기존의 파장 변환기가 가졌던 문제점들을[1][2][3] 해결하고자 한다. 두개의 모드가 약하게 결합되었을 때는 그 파의 크기나 전파상수는 서로 영향을 미치게 된다. 예를 들면 수평결합 파장가변 LD[4]나 방향성 결합 파장 변환기[5]는 이 특성을 이용한 소자이다. 본 논문에서 제안된 소자도 이러한 결합모드 특성을 이용하였다. (중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.416-419
• /
• 2015

In this paper, we propose an effective design of transform hardware for real-time HEVC(High Efficiency Video Coding) encoder. HEVC encoder determines the transform mode($4{\times}4$, $8{\times}8$, $16{\times}16$, $32{\times}32$) by comparing RDCost. RDCost require a significant amount of computation and time because it is determined by bit-rate and distortion which is computated via transform, quantization, dequantization, and inverse transform. This paper therefore proposes a new method for transform mode determination using sum of transform coefficient. Also, proposed hardware architecture is implemented with multiplexer, recursive adder/subtracter, and shifter only to derive reduction of the computation. Proposed method for transform mode determination results in an increase of 0.096 in BD-PSNR, 0.057 in BD-Bitrate, and decrease of 9.3% in encoding time by comparing HM 10.0. The hardware which is proposed is implemented by 256K logic gates in TSMC 130nm process. Its maximum operation frequency is 200MHz. At 140MHz, the proposed hardware can support 4K Ultra HD video encoding at 60fps in real time.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1997.06a
• /
• pp.53-56
• /
• 1997

Tonpilz 압전변환기에 관하여 유한요소법을 사용하여 공기중의 동특성 해석과 수중의 방사임피던스를 해석하였다. 공기중에서 트랜스듀서의 구조를 변화시키면서 입력 어드미턴스 특성과 진동모드를 해석하여 압전변환기를 모델링하였다. 음향 윈도우를 압전변환기 전면에 부착한 후 유한요소법(FEM)에 의하여 매질의 영향을 고려한 입력어드미턴스 특성을 해석하였으며, 또한 방사임피던스 계산 루틴을 추가하여 무한 배플의 경계조건하에서 방사 임피던스를 해석하였다. 공기중과 수중에서의 해석을 통하여 Tonpilz 압전변환기 단일 소자의 구조 변경 및 기계 부재의 추가등에 따라 변동하는 변환기의 특성 및 방사 임피던스를 해석하므로서 평면 배열형 음향 트랜스듀서의 설계에 필요한 파라메터를 구할 수있다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06a
• /
• pp.121-126
• /
• 1998

DV(Digital Video) 영상 압축 방식에서 MPEG-2로 변환할 때 처리단계를 줄이기 위하여 DCT 영역에서 변환하였다. DV 방식의 색차신호 포맷인 4:1:1에서 4:2:2로 변환하고, 2-4-8 DCT 모드를 변환할 때 행렬을 이용하여 변환함으로써 중간과정을 줄였으며, DCT 영역에서 MPEG-2의 율 제어를 구현하였다. DV에서 만든 DCT 계수를 이용하여, 단계적으로 움직임 추정을 함으로써 전역탐색 블록 매칭 방식보다 처리 속도를 개선하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.9
• /
• pp.692-701
• /
• 2003

In this paper, a new logic transformation method to consider both low power consumption and high testability is proposed. We search the CFF(Compact Fanout Free) that has low probability of being observable at the primary outputs. Under the condition that the CFF is unobservable at all primary outputs, the switching operations in it can be removed by adding redundant connections into it. The testability of the transformed circuit generally tends to reduce. In our method, however, the inserted redundant connections operate as test points in the test mode and can improve not only the controllability but also the observability of the CFF. The transformed circuit consumes less power in the normal mode and also has higher testability in the test mode. To show the efficiency of the proposed logic transformation method, we perform some experiments on the MCNC benchmark test circuits. The results show that the power consumption of the transformed circuit is reduced by 13% maximally and the fault coverage of the transformed circuit is increased.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.285-289
• /
• 2009

본 논문에서는 현재 비디오 코덱 표준인 H.264/AVC 에서 사용하고 있는 정수형 변환을 두 번 사용하는 다차원 변환 즉, MDT(Multi-Dimensional Transform) 을 제안한다. 제안하는 알고리듬은 H.264/AVC 7가지 인터 모드중에서 $16{\times}16$, $8{\times}16$, $16{\times}8$블록 모드에 적용된다. H.264/AVC에서 사용하는 정수형 변환을 $4{\times}4$블록 단위로 적용하고 인접하는 4개의 $4{\times}4$블록으로부터 같은 주파수 위치의 계수값을 모아서 16개의 $4{\times}1$벡터 변환을 추가로 수행하는 방법이다. MDT를 수행함으로써 H.264/AVC 표준에서 사용되는 변환이 가지는 예측오차를 유지하면서 공간적 중복도를 추가로 줄일 수 있다. MDT 된 계수들을 정수형으로 양자화하고 양자화된 계수값을 효율적으로 주사하는 방법을 제안하여 압축효율을 높였다. 제안된 알고리듬의 제안하는 MDT 기반 방법은 H.264/AVC High profile 표준보다 평균 3.00%의 비트 절감을 보였다.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.280-285
• /
• 2007

Based on the multimode fiber taper, a mode size converter for effective optical beam coupling between laser and optical fiber or between the two different optical fibers has been proposed and demonstrated. The device has a multimode input end and a single mode output end. The influence of various parameters, including device structure and launching conditions, on the coupling efficiency has been theoretically analyzed. The theoretical results revealed that the gaussian beam can be coupled into a single mode fiber without considerable insertion loss. The proposed multimode fiber taper has been fabricated using heating and pulling equipment incorporating two micro-torches. Experimental results showed that an optical beam with $50\;{\mu}m$ of large beam size was effectively coupled into single mode fiber through the multimode fiber taper. The insertion loss of the device was 1.3 dB.