• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.12
• /
• pp.1152-1160
• /
• 2007

In this paper we deal with a design of integral sliding mode controller to reject the disturbance force acting on the suspension system in the magnetically levitated system which is propelled by the linear induction motor. The control scheme comprises an integral controller which is designed for achieving zero steady-state error under step disturbances, and a sliding mode controller which is designed for enhancing robustness under plant uncertainties. A proper continuous design signal is introduced to overcome the chattering problem. The disturbance force produced by the linear motor is formularized by using a curve fitting of the experimental raw data. Computer simulations show the effectiveness of the designed integral sliding mode controller to reject the disturbance force.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2576-2583
• /
• 2015

In a full-duplex (FD) wireless cellular network, uplink (UL) users induce the severe inter-user interference to downlink (DL) users. Therefore, a user scheduling that makes a pair of DL user and UL user to use the same radio resource simultaneously influences the system performances significantly. In this paper, we first formulate an optimization problem for user scheduling to minimize the occurrence of outage, aiming to guarantee the quality of service of users, and then we propose a suboptimal user scheduling algorithm with low complexity. The proposed scheduling algorithm is designed in a way where the DL user with a worse signal quality has a higher priority to choose its UL user that causes less interference. Simulation results show that the FD system using the proposed user scheduling algorithm achieves the optimal performance and significantly decreases the outage probability compared with the conventional half-duplex cellular system.

• Korean Journal of Optics and Photonics
• /
• v.13 no.4
• /
• pp.301-307
• /
• 2002

The propagation characteristic of an optical waveguide was investigated by measuring with a near-field scanning optical microscope (NSOM) the evanescent field formed at the neighbor of its core-cladding interface. For this purpose, the NSOM system was developed specially as a form of Photon scanning tunneling microscope. The evanescent field distributions of several channel waveguides were measured at the wavelength of 1550 ㎚, and the usefulness of the system was verified by comparing experimental results with simulation results. In particular, the interference phenomena of the guided modes during their propagation along a multimode channel waveguide could be observed directly from the measured evanescent field distribution.

• Korean Journal of Optics and Photonics
• /
• v.22 no.1
• /
• pp.5-9
• /
• 2011

There are technical difficulties in measuring the numerical apertures of multi-mode gradient-index plastic optical fibers (GI-POFs) due to their strong speckle noise originating from dopants, non-uniformity of gradient-index profile, and multi-mode interference. Therefore, we propose a new method of obtaining the numerical aperture by controlling the size of the incident laser beam and measuring the numerical aperture of GI-POF. The results show that we can get a value for the numerical aperture of GI-POF very similar to that measured by the conventional method. We can also obtain the optimum launching condition of input beam and maximum coupling efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.403-410
• /
• 2008

In this paper, we investigate the performance of MMR system in Non-transparent mode. The IEEE 802.16j MMR system has two node of operation, Single-frame (in band) and Multi-frame (out band) mode. In the analysis, we assume that channel interference between MR-BS and RS, or between RSs anywhere in the given area is ignored. The performance is presented in terms of the delay and the frame efficiency by varying number of RS and BS coverage to RS coverage ratio and the maximum coverage area of a BS by varying traffic density. Analytical results show that the Single-frame is more efficient than Multi-frame in frame efficiency and coverage extension.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.26-34
• /
• 2011

In Femtocell that provides high quality of indoor communications with low transmitted power, there are two typical Access modes; Closed Access mode and Open Access mode. In this paper, we propose resource allocation scheme, which mitigates difference of performance between Access modes and improves overall cell performance, according to Access mode. We give more wireless resources to Open Access mode Femtocell, which improves performance of other users, than Closed Access mode Femtocell. If Open Access mode Femtocell uses more resource, there is trade-off between improvement of user using Open Access mode Femtocell and increase of interference that other users receive. So, we solve the optimal value for resource allocation and analyze performance of conventional scheme and proposed scheme applying the optimal value. Eventually, proposed scheme can improve overall cell performance relative to conventional scheme.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.8
• /
• pp.34-42
• /
• 2001

The 1${\times}$2, 1${\times}$4 and 1${\times}$8 multimode interference(MMI) optical power splitters are fabricated by using $Ag^+-Na^+$ ion exchange on BK7 glass. Before fabricating the MMI optical power splitters, we find the refractive index of the channel waveguide and calculate the multimode section length and width. The multimode section lengths and widths are 887${\mu}m$, 1666${\mu}m$ and 1834${\mu}m$ and 40${\mu}m$, 80${\mu}m$ and 120${\mu}m$ for 1${\times}$2, 1${\times}$4 and 1${\times}$8 MMI optical power splitters respectively. The measured properties of the fabricated MMI optical power splitters show that the unbalance ratios of the 1${\times}$2, 1${\times}$4 and 1${\times}$8 MMI optical power splitters are 1.4[dB], 1.7[dB] and 2.0[dB] and the excess losses of those sre 0.96[dB], 2.26[dB] and 1.67[dB]. respectively.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.4
• /
• pp.106-111
• /
• 1999

This study discusses a non-contact optical technique electronic, electronic speckle pattern interferometry(ESPI) that is well suited for in-plane and out-of-plane deformation measurement Used as specimen which has the boundary condition of two clamped parallel edges composite material AS4/PEEK[30/-30/90]s was analyzed by ESPI to determined the characteristics of tensile and vibration. These are quantitativly compared with the result of FEM analysis. Finally the results of this study are briefly summarized as follows : (1) In the in-plane strain analysis by comparison of theoretical results with experimental results qualitatively we confirmed that measurement errors are within 3 % in case of accuracy (2) From comparison of experimental vibration modes with numerical vibration mode shapes by the FEM analysis quantitatively we confirmed that vibration mode measurement by the ESPI has high accuacy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.148-151
• /
• 2006

The DC power-bus' resonance is frequently attributed to EMI sources in the PCBs. Subsequently, it will ruin the digital signal integrity within one system or between adjacent systems in the form of conducted or radiated emission. Hence, since it is of importance to examine the PCB's emission, this paper sheds a light on the radiated emission from the power-bus with regards to its resonance modes. A full-wave analysis method is used to calculate the impedance and radiated electric fields and is validated by physics and an EM analysis tool.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.69-79
• /
• 2001

비동기 및 차세대 이동통신 시스템의 진화 과정 상에서 RF관련 규격들의 변화에 대해 알아보았고, 비동기 시스템의 RF부를 제작하는데 사용하게 될 RF 부품 기술 동향을 단말기와 기지국의 경우로 나 누어 분석하였다. 또한 차세대인 4세대 시스템 RF 부의 진화 전망에 대해 간단히 알아보았다. 시스템 이 진화할수록, 요구되는 데이터 처리 능력으로 인 해 채널 대역폭은 점점 넓어지고, 기존 시스템과의 상호 간섭 방지를 위해 일반적인 RF 관련 규격 중 방사 규격과 요구되는 선형성이 엄격해진다. 앞으로 의 RF 부품의 기술적 진화는 직접 변환 방식의 부 품 개발로 단말기의 소형화, 저가격화를 이를 것이 고, 동작 주파수 영역을 0.8~5 GHz대로 하기 위한 광대역화, 선형화가 요구될 것이다. 또한 4 세대 시스템에서는 기존의 주파수 이용 개념과 무선 전송 기술에 변화를 주게 될 SDR 기반의 다중모드/복합 다중 접속 기술을 적용하게 될 것으로 예상된다.