DOI QR코드

DOI QR Code

Measurement of Numerical Aperture of Graded-index Plastic Optical Fiber by Using a Variable Aperture

입사광의 크기 조절을 통한 경사굴절률 플라스틱 광섬유의 수치구경 측정기법

  • Received : 2011.01.26
  • Accepted : 2011.02.07
  • Published : 2011.02.25

Abstract

There are technical difficulties in measuring the numerical apertures of multi-mode gradient-index plastic optical fibers (GI-POFs) due to their strong speckle noise originating from dopants, non-uniformity of gradient-index profile, and multi-mode interference. Therefore, we propose a new method of obtaining the numerical aperture by controlling the size of the incident laser beam and measuring the numerical aperture of GI-POF. The results show that we can get a value for the numerical aperture of GI-POF very similar to that measured by the conventional method. We can also obtain the optimum launching condition of input beam and maximum coupling efficiency.

다중모드 경사굴절률 플라스틱 광섬유는 경사굴절률을 생성하기 위하여 첨가하는 미세입자, 불균일한 경사굴절률의 분포, 다른 모드 사이의 광학적인 간섭 등으로 인하여 스펙클 잡음이 크기 때문에, 광섬유 출력 단에서 방사되는 기하학적 광 세기 분포를 분석하여 측정하는 기존의 일반적인 수치구경 측정 방법으로는 수치구경 측정이 매우 어려운 문제점이 있다. 따라서 본 논문에서는 이와 같은 다중모드 경사굴절률 플라스틱 광섬유의 수치구경 측정을 위하여 입사 단에서 입사 광의 크기를 조절하여 수치구경을 구하는 새로운 방법을 제안하고, 이를 이용하여 플라스틱 광섬유의 수치구경을 측정하였다. 측정 결과, 기존의 방법으로 측정한 플라스틱 광섬유의 수치구경 값과 비교적 잘 일치함을 확인할 수 있었으며, 제안한 기법이 출력 단에서 방사되는 광세기 분포의 모호함을 배제할 수 있고 입력광의 입사 조건 및 광섬유 결합 효율을 최적화할 수 있는 장점이 있음을 알 수 있었다.

Keywords

References

  1. J. Zubia and J. Arrue, “Plastic optical fibers: an introduction to their technological processes and applications,” Optical Fiber Technology 7, 101-140 (2001). https://doi.org/10.1006/ofte.2000.0355
  2. I. Mollers, D. Jager, R. Gaudino, A. Nocivelli, H. Kragl, O. Ziemann, N. Weber, T. Koonen, C. Lezzi, A. Bluschke, and S. Randel, “Plastic optical fiber technology for reliable home networking: overview and results of the EU project POF-ALL,” IEEE Comm. Mag. 47, 58-68 (2009). https://doi.org/10.1109/MCOM.2009.5181893
  3. G. Jiang, R. F. Shi, and A. F. Garito, “Mode coupling and equilibrium mode distribution conditions in plastic optical fibers,” IEEE Photon. Technol. Lett. 9, 1128-1130 (1997). https://doi.org/10.1109/68.605524
  4. S. Savovic and A. Djordjevich, “Influence of numerical aperture on mode coupling in step index plastic optical fibers,” Appl. Opt. 43, 5542-5546 (2004). https://doi.org/10.1364/AO.43.005542
  5. T. Ishigure, A. Horibe, E. Nihei, and Y. Koike, “Highbandwidth, high numerical aperture graded-index polymer optical fiber,” J. Lightwave Technol. 13, 1686-1691 (1995). https://doi.org/10.1109/50.405310
  6. W. Daum, J. Krauser, P. E. Zamzow, and O. Ziemann, POF-polymer Optical Fibers for Data Communication (Springer-Verlag, Berlin, Germany, 2002), pp. 3-19, 277-293.
  7. ITU-T Study Group 15, “Revised verised of recommendation G.651-characteristics of 50/125um multimode graded index optical fiber cable,” ITU-T, Feb (1998).
  8. G. C. Papen and G. M. Murphy, “Modal noise in multimode fibers under restricted launch conditions,” J. Lightwave Technol. 17, 817-822 (1999). https://doi.org/10.1109/50.762898
  9. T. H. Wood, “Actual modal power distributions in multimode optical fibers and their effect on modal noise,” Opt. Lett. 9, 102 (1984). https://doi.org/10.1364/OL.9.000102
  10. T. H. Wood and L. A. Ewell, “Increased received power and decreased modal noise by preferential excitation of low-order modes in multimode optical fiber transmission systems,” J. Lightwave Technol. LT-4, 391 (1986).