• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.565-570
• /
• 2011

In this paper, the analytical tuning rules of the proportional-integral-derivative (PID) controller have been derived for a broad class of stable, integrating, and unstable processes without time delay. On the basis of the renowned internal model control (IMC) design principles and the two-degree-of-freedom (2DOF) control structure, the proposed method can be effectively used for obtaining the enhanced performances of both the disturbance rejection as well as the set-point tracking problems, since the design scheme is simple, straightforward, and can be easily implemented in the process industry. Several processes without time delay are employed to demonstrate the improved closed-loop performance of the proposed controller design in compared with the other well-known design methods in terms of the same degree of robustness.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.931-942
• /
• 1999

This paper develops a 3 DOF vehicle model which includes lateral, roll and yaw motion to study a 4WS vehicle. The model is used for the simulation of a 4WS vehicle behavior, and to derive a control algorithm for rear wheel steering. This paper uses a feedforward plus feedback control scheme to compute a rear wheel steering angle. The feedforward control scheme for computing the first rear wheel steering angle uses a gain which is acquired by multiplying a proper value on a gain to maintain a zero sideslip angle. The feedback control scheme for computing the second rear wheel steering angle uses fuzzy logic and model following control scheme. A linear 2 DOF model is used as a reference model for model following control, and is derived from the developed 3 DOF model by neglecting sprung mass roll motion. A reference state variable is yaw rate, and is computed using the linear 2 DOF model. J-turn and lane change maneuver simulation are performed to show the effectiveness of the developed control scheme. The simulation results show that the 4WS vehicle with the developed control scheme has much better performance in yaw rate, lateral acceleration, roll angle, and sideslip angle than the 2WS vehicle. Also, the results show that the performance of the developed control is close to the one of an optimal control which assumes all states are perfect.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.2
• /
• pp.163-169
• /
• 1998

In this paper, we design an optimal model following ${\mu}-$synthesis control system for fuel-injection of diesel engine which has robust performance and satisfactory command tracking performance in spite of uncertainties of the system. To do this, we give gain and dynamics parameters to the weighting functions and apply genetic algorithm with reference model to the optimal determination of the weighting functions that are given by the D-K iteration method which can design ${\mu}-$synthesis controller in the state space. These weighting functions are optimized simultaneously in the search domain which guarantees the robust performance of the system. The ${\mu}-$synthesis control system for fuel-injection designed by the above method has not only the robust performance but also a better command tracking performance than those of the ${\mu}-$synthesis control system designed by trial-and-error method. The effectiveness of this ${\mu}-$synthesis control system for fuel-injection is verified by computer simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.1
• /
• pp.45-51
• /
• 1998

In the realization of a high speed digital transmission over several tens kbps in mobile communications, it follow delay distortion on a count of transmission path variation by multipath interference waves. Therefore it is inevitably necessary to establish the techniques overcoming the frequency selective fading. In this paper, a feedback running RLS algorithm which is improved the RLS algorithm using exponential weighting factor, is proposed for the control algorithm of DFE and by the computer simulation method, and the performance characteristics of DFE is analyzed for the one-ray and two-ray waves model under the random Gaussian noise. The computer simulation results of proposed RLS algorithm for the $\pi$/4QPSK signal with one symbol time delayed interference signal of S/I = 20［dB］, under the S/N = 10［dB］ with $\lambda$= 0.9 showed excellent following characteristics and equalization characteristics.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.609-612
• /
• 2008

The solid immersion lens (SIL) based near-field recording (NFR) system is considered as one of the high density optical data storage system. For the NFR servo system, tracking servo control is a difficult technology to maintain extremely small gap between SIL and media within one twentieth. This is because the track pitch is decreased for increasing the recording density. In this paper, we propose disturbance observer (DOB) and internal model principle (IMP) for disturbance rejection due to eccentricity of disk. The performance of tracking controller using DOB is increased by about 85%, 94%, 97% using Q filters that have bandwidths of 50Hz, 125Hz, 250Hz, respectively. Moreover, IMP based controller is effectively reduced the residual error.

• The Journal of Korea Robotics Society
• /
• v.15 no.3
• /
• pp.277-285
• /
• 2020

A differential drive wheeled robot is a kind of mobile robot suitable for indoor navigation. Model predictive control is an optimal control technique with various advantages and can achieve excellent performance. One of the main advantages of model predictive control is that it can easily handle constraints. Therefore, it deals with realistic constraints of the mobile robot and achieves admirable performance for trajectory tracking. In addition, the intention of the robot can be properly realized by adjusting the weight of the cost function component. This control technique is applied to the local planner of the navigation component so that the mobile robot can operate in real environment. Using the Robot Operating System (ROS), which has transcendent advantages in robot development, we have ensured that the algorithm works in the simulation and real experiment.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1377-1379
• /
• 1996

In this paper, each parameter was identified by the gradient descent method to overcome difficulty deciding fuzzy rules of FLC for the unknown process and the type of membership Junctions. Usually PID or optimal control theories have been mostly usee in control field so far. However, optimal control requires much time for calculation because of adaptation for disturbance and nonlinearity. And intricate technique such as MRAS which can be realized only by an expert are limited to be used in the systems requiring rapid and precise response because of comparatively longer calculating time and complicateness. Gradient descent method is a method to find Z minimizing a function about a certain vector Z. And required output of FLC is gained using gradient approaching method in order to adapt control rule parameters of FLC. Simulation proved validation of this algorithm.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.709-716
• /
• 2007

An active steering bogie has been theoretically proved to improve both stability and steering performance remarkably. However, It has not been commercialized yet even though many researchers have been trying to develop it because some technical difficulties still exist such as information acquisition fer active control, increasing mechanical components, high energy consumption, fail-safe problem and so on. To solve those problems, an advanced active steering mechanism is proposed in this paper. With this mechanism, required control force is small enough to use direct drives. Therefore, the number of additional mechanical components can be minimized since mechanical transducers like gears are not necessary. Fail-safe function can be also inserted easily. In this paper, concept design of the proposed active steering bogie is introduced and the possibility is verified through computer simulation using linear dynamic model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.609-617
• /
• 2013

This paper presents a near-minimum time path planning algorithm for autonomous driving. The problem of near-minimum time path planning is an optimization problem in which it is necessary to take into account not only the geometry of the circuit but also the dynamics of the vehicle. The path planning algorithm consists of a candidate path generation and a velocity optimization algorithm. The candidate path generation algorithm calculates the compromises between the shortest path and the path that allows the highest speeds to be achieved. The velocity optimization algorithm calculates the lap time of each candidate considering the vehicle driving performance and tire friction limit. By using the calculated path and velocity of each candidate, we calculate the lap times and search for a near-minimum time path. The proposed algorithm was evaluated via computer simulation using CarSim and Matlab/Simulink.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.31-39
• /
• 2012

This study aims to suggest a methodology of localizing and calibrating parameters, such as acceleration, deceleration, and lane changing which are the basis of car following model in interrupted traffic flow to overcome the limitation of origin and destination based transportation simulation and to verify the application of activity-based model for use in Korean roadway condition in a large scale area or a city. Especially, we figured out that a proper cell size reflecting Korean traffic conditions is 1.0m rather than 7.5m which is default size and a methodology of tracking vehicle behavior characteristics through tracking vehicle ID is suggested on this study. In addition, vehicle running characteristics in real interrupted traffic flow is analyzed through subdividing vehicle types and updating vehicle type ratio. For verification of suggested model, some portion of Dalgubyul-ro in the Daegu city is tested, and the possibility of realization of interrupted traffic flow in simulation is studied.