• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.4
• /
• pp.1011-1015
• /
• 2005

Antitumor and anti-metastatic effects of mineral powder(MP) were studied. In the present study, MP did not exhibit the any cytotoxic activity against leukemic cells such as L1210 and U937 tumor cell lines in vitro. Also, MP did not exhibit the any cytotoxic activity against solid cells such as A549 and B16-BL6 tumor cell lines in vitro. However, in vivo, MP exhibit a significant antitumor activity in BDF1 mice bearing Lewis lung carcinoma cells(LLC) with inhibition rates of 46 and $23\%$ at 200 and 100 mg/kg/day, respectively. Furthermore, in pulmonary colonization assay, MP exhibit the inhibitory effect of tumor metastasis. From these results, it was concluded that MP had antitumor and anti-metastatic activity suggesting its application for the prevention and treatment of cancer.

• Journal of Chest Surgery
• /
• v.27 no.1
• /
• pp.9-14
• /
• 1994

Substance P[SP] has been known to be a peptide which may be plays a role as a neurotransmitter in central nervous system as well as peripheral autonomic nervous system. It has been reported that SP was widely distributed in the nerve of the tracheal smooth muscle and induced the muscle contraction. However, definite action mechanism of SP in the tracheal smooth muscle was not clear, yet. Thus, present experiment was performed to elucidate an effect of substance P and an action mechanism on contraction of the smooth muscle in rabbits. In order to find a neural mechanism to the effect of SP on the tracheal smooth muscle contraction, atropine sulfate, tetrodotoxin, propranol and phentolamine were administered at 10 min before the addition of SP. Otherwise,to find effect of SP antagonists on the action of SP, [D-Pro2, D-Try7,9]SP, [D-Arg1, D-Pro2, D-Trp7,9, Leu11]SP and [D-Pro4, D-Trp7,9]SP were administered as a same fashion. These following results were obtained. 1] SP induced contraction of the tracheal smooth muscle under resting condition and the contraction was increased dose-dependently. 2] Cholinergic blocker[atropine], neural blocker[tetrodotoxin] and adrenergic blocker[propranol and phentolamine] didn`t have an effect on the contractile response. 3] Three SP antagonists inhibited the contractile response. 4] Isoproterenol relaxed the contraction induced by SP. The above results suggested that SP induced contraction of the tracheal smooth muscle directly act to the smooth muscle in rabbits. The autonomic nervous system did not seem to participate in the SP action.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.3
• /
• pp.110-114
• /
• 2006

In this work, comparative studies on microstructure and mechanical properties between $Mo_2N$ and Mo-Si-N coatings were conducted. Ternary Mo-Si-N coatings were deposited on AISI D2 steel substrates by a hybrid method, where AIP technique was combined with a magnetron sputtering technique. Instrumental analyses of XRD, HRTEM, and XPS revealed that the Mo-Si-N coatings must be a composite consisting of fine $Mo_2N$ crystallites and amorphous $Si_3N_4$. The hardness value of Mo-Si-N coatings significantly increased from 22 GPa of $Mo_2N$ coatings to about 37 GPa with Si content of 10 at.% due to the refinement of $Mo_2N$ crystallites and the composite microstructure characteristics. The average friction coefficient of the Mo-Si-N coatings gradually decreased from 0.65 to 0.4 with increasing Si content up to 15 at.%. The effects of Si content on microstructure and mechanical properties of Mo-N coatings were systematically investigated.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.1
• /
• pp.39-43
• /
• 2007

Previously, we have reported that PLGA nanoparticles were prepared for sustained release of water-soluble blue dextran and the particle size, in vitro release pattern and encapsulation were modulated by varying polymers. This study was designed to encapsulate plasmid DNA in PLGA nanoparticles and to investigate the effect of Polymers and temperatures. PLGA nanoparticles were fabricated with poloxamer 188 (P188) or poloxamer 407 (P407) by using spontaneous emulsification solvent diffusion method. As a model plasmid DNA, pCMV-Taq2B/1L-18 was encapsulated in PLGA nanoparticles. Then, the particle size, zeta potential and encapsulation efficiency of nanoparticles containing plasmid DNA were investigated. Particle sizes of PLGA nanoparticles prepared with P188 and P407 were in the range of 200-330 nm and 250-290 nm, respectively. Zeta potentials of nanoparticles were negative regardless of nanoparticle compositions. Encapsulation efficiency of P407 nanoparticles prepared at $30^{\circ}C$ was higher than those at other preparation condition. From the results, the PLGA nanoparticles prepared with poloxamers at different temperature, could modulate the particles size of nanoparticles, and encapsulation efficiency of plasmid DNA.

• Management & Information Systems Review
• /
• v.25
• /
• pp.297-319
• /
• 2008

Dramatic increase of social concerns on the environments has led companies to take into account environmental issues in strategic decision-making. The strategic consideration on environmental management is essential to the modern companies. This study was initiated with a research purpose to explain the level and the characteristics of corporate environmental strategy through comparing the Hyundai, GM and Toyota Motor Company. The research method adopted by this research is a case analysis. The degree of environmental management strategy was evaluated in functional sectors or value chain including the production, research and development, procurement, logistic and recycling etc. Consequently, this study could find that Toyota is the most advanced company in the level of environmental management strategy. Also there are many differences among three companies in the level and degree of environmental management strategy. Hyundai and GM did not consider environmental management in foreign subsidiaries as much as Toyota. Motor Company. Also the study find out there are actual gaps between the rhetoric and reality in environmental management strategy in Hyundai Motor Co. All companies included in this study consider importantly ISO14001 as the tool to maintain the environmental management of their companies.

• Management & Information Systems Review
• /
• v.24
• /
• pp.45-71
• /
• 2008

These days the international environmental regulations of the developed countries, especially from the EU, are rapidly changed to the regulations of product-based environment from a conventional end-of-pipe environmental technology. Especially the motive in this paper come from the EU's electrical and electronic equipment environment regulation. It may affect much to whole export of Korea Firms Integrated product policy has the potential to increase not only competitive power in today's global market, but also trade compatibility between countries. Furthermore it is important to make a contribution to sustainable development. CEOs must change their notions about firms' environmental policy from the end-of-pipe approach to the sustainable approach to improve company's competitive power. As emphasized a paradigm of naw environmental management by EU' environmental directives, the company must establish clean production system to save resources and reduces pollutant. Also Korean Company constructs a systematical network to collect EU' environmental regulation information which are changing rapidly. Large company will cooperate with small and medium-sized firm for their win-win strategy in the field of environmental management. Also it is necessary to make the domestic regulations of product-based environment to meet the international environmental regulations.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.6
• /
• pp.119-126
• /
• 2014

Micro-holes of conductive ceramic are required in micro structures. Micro-electrical discharge machining (Micro-EDM) is an effective machining method since EDM is as process for shaping hard metals and complex-shaped holes by spark erosion in all kinds of electro-conductive materials. However, as the depth of micro hole increases, the machining condition becomes more unstable due to inefficient removal of debris between the electrode and the workpiece. In this paper, micro-EDM was performed to evaluate machining characteristic such as electrode wear, machining time, taper angle, radial clearance with varying voltage and ultrasonic vibration on 10 vol.% Carbon-nanotube reinforced conductive $Al_2O_3$ composite fabricated by spark plasma sintering in previous research.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.23-29
• /
• 2013

In this paper, pure $I_{ph}$ and hybrid carbon nanotube reinforced $I_{ph}$ were sintered using the SPS(spark plasma sintering) method for high densification. A nanosecond laser (${\lambda}=1063nm$, ${\tau}P=10ns$) and a femtosecond laser (${\lambda}=1027nm$, ${\tau}P=380fs$) were installed on an optical system for the micromachining test. The ablation characteristics of the pure $I_{ph}$ and CNT/$I_{ph}$ composites, such as thermal effect and ablation depth, were investigated using FE-SEM and a confocal microscope device. Laser machining results for the two mating materials showed improved performances: CNT/$I_{ph}$ composites showed good surface morphology of hole drilling without a melting zone due to the composites' high thermal properties; also, the ablated depth of CNT/$I_{ph}$ was higher than that of pure $I_{ph}$.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.30-36
• /
• 2013

An FFD(flexible fine die) is an embossed mold that consists of a thin plate ranging from 0.6 to 3 mm in thickness. FFDs are primarily used for cutting LCD films and F-PCB sheets. In the high-speed micro-milling process of flexible fine dies, the lubrication and cooling of the cutting edges is very important from the aspect of eco machining and cutting performance. In this paper, a comparative study of tool wear and surface roughness between cutting fluid and hybrid lubrication for eco-machining of FFD was conducted for processes of high-speed machining of highly hardened material (STC5, HRC52). Especially, the incorporated fluid method for eco machining, in which the cutting performances can be simultaneously measured, was introduced. The machining results show that hybrid lubrication, instead of conventional cutting fluid, leads to excellent tool wear and surface roughness and represents the proper conditions for eco micro-machining of flexible fine dies.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.37-44
• /
• 2013

Friction stir welding (FSW) is a solid state joining technique that has expanded rapidly since its development in 1991 and has numerous applications in a wide variety of industries. This paper introduces the basic principles of friction stir welding (FSW) and presents a survey of the latest technologies and applications in the field. The basic principles that are discussed include the terminology, tool/workpiece processes, FSW merits and process variants. In particular, the process variants including the rotation speed and traveling speed are discussed, which include the defect-free zone in an oxygen free copper and Al alloy, respectively. Multiple aspects of the FSW machine are developed, including a horizontal 2D FSW machine and a hybrid complex FSW machine. The latest applications are introduced, with an emphasis on the recent advances in the aerospace, automotive, and IT display industries. Finally, the direction for future research and potential applications are examined.