• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 1997.06b
• /
• pp.8-10
• /
• 1997

종양은 아직 그 발생 원인과 기작이 정확히 밝혀져 있지 않으므로 정확한 정의를 내리는 것은 어려우나 일반적으로 종양이란 정상 세포가 갖고 있는 세포 분열의 특이성을 상실하여 일어나는 조직의 자율적인 과잉 성장을 말한다. 이와 같은 세포의 비정상적인 증식에 의한 종양을 임상 및 병리 형태학적으로 양서 종양과 악성종양으로 분류한다. 양성 종양을 일으키는 종양 세포는 정상 세포와 비슷할 뿐 아니라 그 주변 세포들과 확실한 경계를 이루고 있으며 증식도 느리며 다른 부위로의 전이가 없다. 이에 반해 악성종양은 일반적으로 증식도 빠르고 이형의 세포로서 주변의 조직으로 확산, 전이될 뿐만 아니라 최종적으로 숙주인 개체를 사망시킨다. 악성종양은 다시 상피 조직에서 유례한 암, 비상피 조직에서 유래된 육종, 백혈구에서 유래된 백혈병 등으로 구별하지만 그의 본질은 거의 같으며 모든 악성종양은 통속적으로 암이라고 불리운다. 종양의 발생원인으로 크게 3가지로 나눌 수 있는데 화학물질, 바이러스 및 유전적 요인에 의한 것으로 알려졌다. 최초의 발암물질로 알려진 benzopyrene에 의한 발암 등 연구에 의해 화학적 발암원들은 직접 발암 물질로 작용하는 것이 아니라, 일단 체내에서 대사된 후 이들 대사 산물일 DNA 등에 작용함으로써 발암이 유도 되는 것으로 밝혀졌다. 이와 같이 화학적 변화를 거친 후에야 DNA에 영향을 미치는 것외에 다른 화학물질들은 또 다른 기작을 통해 암을 유발하는데 쥐의 피부에 benzopyrene을 한 번 처리하면 암을 유발하지 않으나 여기에 phorbol ester를 처리하면 높은 빈도로 암이 형성된다. 여기서 benzopyrene과 같이 세포의 DNA에 돌연변이를 일으키는 작용을 하는 발암물질을 발암개시제라 하고 phorbol ester처럼 그 자체로는 발암능이 없으나 발암개시제에 노출된 세포에 영향을 미쳐 발암능을 크게 강화시켜 주는 것을 발암촉진제라고 한다. 암은 세포증식 제어계에 DNA가 이상을 일으킨 현상을 말하는 데 이와 같은 DNA의 변형된 유전정보에 의해 암과 관련된 단백질을 합성하므로 이 DNA를 암유전자라 부르며 바이러스에서 유래된 것을 V-one 그리고 세포에서 유래된 것을 c-one이라 한다. 암유전자는 본래 암을 형성하기 위한 것이 아니라 증식제어 유전자로서 변이나 비정상으로 활성화 됨으로써 암을 유발시키므로 proto-oncogene이라 부른다. 또한 고등동물의 유전자 중에는 세포성장을 억제하는 유전자들이 있으며 이들은 세포의 성장 생존 분화를 조절하는 것으로 생각되고 있다. 따라서 이들 유전자는 세포의 암변형을 억제하는 기능을 가지고 있다. 이들 유전자의 이상으로 세포성장 억제기능이 상실되면 세포의 과잉 성장이 초래되면 결과적으로 암으로 유발하는 것으로 추측되고 있다. 최근의 연구에 의하면 암세포에서 암억제 유전자의 이상과 암유전자의 활성화가 함께 발견 되면서 정상세포가 암으로 변형되는 과정에는 암억제 유전자의 이상과 암유전자의 활성화가 동시에 관여한 가능성이 높은 것으로 알려져 있다. 정상 세포가 암을 유발하기 위해서는 발암의 다단계설에서와 같이 여러 단계의 변과가 필요한데 여러 가지 요인에 의해 정상세포의 염색체가 변화되어 정상세포들이 가지고 있는 세포분열의 특이성을 상실하고 증식이 빠르고 저항력이 강한 세포가 선택 되어지고 비정상 서ㅔ포으 과잉 분여러에 의해 종양이 형성되며 이어서 혈관의 신생을 촉진하는 맥관형성, 전이 등이 과정을 거쳐 신체의 다른 부위로 전이된다. 20세기 초까지는 암은 노화와 함께 자연발생적으로 일어나는 피할 수 없는 질병으로 여겨졌으며 그 치료도 조기에 발견된 암환자에게 외과적인 치료를 하는 것이 최선의 방법 이었다. 그러나 현재에는 암환자의 80% 이상이 환경적 요인에 의해 암이 발생 된다고 믿어지고 있다. 과거 치료에 중점을 둔 것에서 점차 예방의 가능성과 그 방법의 모색에 관심을 갖게 되었으며 치료적인 면에서도 외과적 수술 이외에 방사선 치료, 항암제의 투여 등 약물요법, 면역요법의 이용 이외에 더 나아가 gene theraph 및 tumor vaccines 개발에 대한 관심도 증가되고 있다. 국제암연구협회에서는 인간에게 발암이 가능한 물질의 종류를 정기적으로 발표하고 있는데 지금까지 발암 가능성이 높다고 널리 알려진 위험요인을 크게 나누어 보면 다음과 같다. 흡연, 음주, 식이요인, 호르몬 및 기타 요인으로 약물, 자외선 등을 들 수 있는데 현재까지 이들 요인에 의한 발암 기작이 완전히 규명된 것은 아니지만 이들에 의한 발암의 확률이 높다는 것은 사실이므로 이 위험요인에 노출되는 것을 방지함으로써 암발생을 예방할 수 있을 것이다. 암발생의 예방법으로는 암발생 자체를 예방하는 것과 이미 발생한 암환자를 조기 발견하고 치료하는 방법이 있을 수 있다. 현재까지의 여러 연구 결과들을 보면 유전적인 요인을 제외한 대부분의 발암 위험인자들은 개개인의 생활습관과 밀접히 관련되어 있음을 알 수 있다. 이를 바탕으로 1992년 대한 암협회에서는 '암 예방 14개 권장 사항'을 발표하여 국민 홍보활동을 하고 있는데 그 내용의 반 이상이 식생활 습관과 관련되어 있을 정도이므로 암예방에 있어서의 식품의 역할이 매우 크다 할 수 있다. 따라서 건전한 생활습관과 더불어 적절한 식품의 섭취는 암예방을 위한 기본이 될 것이다.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.53-60
• /
• 2010

In the present study, experiments have been performed to investigate the possibility of removing Cochlodinium polykrikoides using the dredged sediment from a coastal fishery and then to derive the optimal conditions; the amount and particle size of dredged sediment besprinkled into water, the thermal treatment, the types and amounts of additives, and the depth profile of Cochlodinium polykrikoides. Results showed that the optimal amount of dredged sediment besprinkled into water was 6~10 g/L, and the removal efficiency of Cochlodinium polykrikoides after the reaction time for 60 min was 73~93%. Note that, in the real sea water, it is necessary to besprinkle 6~10 $kg/m^3$ of dry dredged sediment on a unit area (1 $m^2$). With decreasing particle size, Cochlodinium polykrikoides could be more efficiently removed. The removal efficiency was 93% with the dredged sediment smaller than 100 ${\mu}m$, whereas it was 51% with that of 100 ${\mu}m$ ${\mu}m$. Since most of dredged sediment (over 90%) was smaller than 100 ${\mu}m$, high efficiency could be obtained by besprinkling only the dredged sediment without pre-treatment. CaO was found to be an effective additive in promoting the removal efficiency (up to 99%). The optimal amount of additive was 5~10%, however, it was necessary to use as small amount of an additive as possible in order to avoid the sharp increase in pH. The removal efficiency increased with increasing depth profile of Cochlodinium polykrikoides. The removal efficiency was 83% at 5 cm depth, whereas it was 93% at 50 cm depth. In the sea water, red tide occurred within 3 m depth, and furthermore most Cochlodinium polykrikoides existed within 1 m depth. It was, therefore, expected that higher removal efficiency of Cochlodinium polykrikoides could be obtained when the dredged sediment was besprinkled into the sea water. The removal efficiency of Cochlodinium polykrikoides was up to 93% when the dredged sediment (<100 ${\mu}m$) was besprinkled into water at the ratio of 10 g/L. This result was comparable to that obtained with loess (90~97%). All the results in the present study indicated that the dredged sediment from a coastal fishery could be successfully used as a substitute of loess for removing the red tide alga.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.10
• /
• pp.2575-2583
• /
• 1998

The productionof the highly relible softwae systems and theirs performance evaluation hae become important interests in the software industry. The software evaluation has been mainly carried out in ternns of both reliability and performance of software system. Software reliability is the probability that no software error occurs for a fixed time interval during software testing phase. These theoretical software reliability models are sometimes unsuitable for the practical testing phase in which a software error at a certain testing stage occurs by causes of the imperfect debugging, abnornal software correction, and so on. Such a certatin software testing stage needs to be considered as an outlying stage. And we can assume that the software reliability does not improve by means of muisance factor in this outlying testing stage. In this paper, we discuss Bavesian software reliability growth modeling and estimation procedure in the presence of an imidentitied outlying software testing stage by the modification of Jehnski Moranda. Also we derive the Bayes estimaters of the software reliability panmeters by the assumption of prior information under the squared error los function. In addition, we evaluate the proposed software reliability growth model with an unidentified outlying stage in an exchangeable model according to the values of nuisance paramether using the accuracy, bias, trend, noise metries as the quantilative evaluation criteria through the compater simulation.

• The KIPS Transactions:PartB
• /
• v.16B no.5
• /
• pp.341-346
• /
• 2009

The motion data glove is a representative human-computer interaction tool that inputs human hand gestures to computers by measuring their motions. The motion data glove is essential equipment used for new computer technologiesincluding home automation, virtual reality, biometrics, motion capture. For its popular usage, this paper attempts to develop an inexpensive visual.type motion data glove that can be used without any special equipment. The proposed approach has the special feature; it can be developed as a low-cost one becauseof not using high-cost motion-sensing fibers that were used in the conventional approaches. That makes its easy production and popular use possible. This approach adopts a visual method that is obtained by improving conventional optic motion capture technology, instead of mechanical method using motion-sensing fibers. Compared to conventional visual methods, the proposed method has the following advantages and originalities Firstly, conventional visual methods use many cameras and equipments to reconstruct 3D pose with eliminating occlusions But the proposed method adopts a mono vision approachthat makes simple and low cost equipments possible. Secondly, conventional mono vision methods have difficulty in reconstructing 3D pose of occluded parts in images because they have weak points about occlusions. But the proposed approach can reconstruct occluded parts in images by using originally designed thin-bar-shaped optic indicators. Thirdly, many cases of conventional methods use nonlinear numerical computation image analysis algorithm, so they have inconvenience about their initialization and computation times. But the proposed method improves these inconveniences by using a closed-form image analysis algorithm that is obtained from original formulation. Fourthly, many cases of conventional closed-form algorithms use approximations in their formulations processes, so they have disadvantages of low accuracy and confined applications due to singularities. But the proposed method improves these disadvantages by original formulation techniques where a closed-form algorithm is derived by using exponential-form twist coordinates, instead of using approximations or local parameterizations such as Euler angels.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.2
• /
• pp.123-127
• /
• 1987

The Pungent principles and Essential oil compositions of Zanthoxylum piperitum $D_E$ $C_{ANDOLIE}$(peel, barb) were analysed by HPLC and GC, respectively. Total Pungent principle contents of peels were about as 12 times as those of barks. The Sanshool I, Sanshool IV, Sanshool III and Sanshoo V were the major Pungent principles in the peels and barks. Besides, several Unknown Pungent principles were discovered in the peels and barks, too. Total Essential oil contents of peels were higher than those of barks at the ratio of 1.8 % to 0.5%. The Cineol+Limonene(37.7%) were the main Essential oil compositions in the peels, while ${\alpha}-Terpineol(16.5%)$ and Pinene(15.5%) were the major portion in the barks. The Essential oil of peels and barks were composed Pinen, Myrcene, Cineol+Limonene, Linalool, Isopulegol, Terpinen-4-ol, ${\alpha}-Terpineol$ and Piperitone. Besides, seven Unknown compositions were discovered, too.

• Journal of Korean Society of Forest Science
• /
• v.24 no.1
• /
• pp.45-52
• /
• 1974

This study was carried out to examine the subsitution possibility into water soluble amino resins instead of phenolic resin as a sizing material for the strength increase on the wet forming hardboard. The properties of hardboard, manufactured with amino-resins based urea, melamine, formaline, and methanol which were low priced domestic products, were examined in comparison with those of hardboard treated with phenolic resin. In this study by the results and discussions, it may be summarized as follows: 1. Amino-resins are able to be substituted for the phenolic resin as a good sizing material for strength increase in the manufacture of wet forming hardboard. Under the considerations of economic advantages and properties of hardboard, modified urea-melamine resin was given a best results. 2. The specific gravities of hardboard that were treated with phenolic resin was equal to that treated with modified amino type resin, and in case of urea-melamine resin, the specific gravity value were lowest among them. 3. The results of moisture contents were satisfied the standard which calls for 13 percent or below. There were no differences in moisture contents between hardboards, treated with melamine resin and modified urea-melamine resin but phenolic resin. The moisture contents of hardboard treated with phenolic resin was shown the lowest. 4. The water absorption of hardboard treated with phenolic resin was greater than those treated with amino resins, and to satisfy the standard of water resistance, the treatment of 2 percent paraffin wax emulsion was needed in this case. There were no differences in water absorptions between hardboards, treated with melamine resin and modified urea-melamine resin. To satisfy the standard of water resistance in this case the treatment of 1 percent paraffin wax emulsion was shown good results. 5. The differences among the flexural strength in using tested three adhesives were significant. The flexural strength were shown the signification by order of melamine resin, modified urea-melamine resin, and phenolic resin. In all cases to satisfy the standard of flexural strength, the treatment of 3 percent sizing materials for strength increase was needed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9B
• /
• pp.610-618
• /
• 2005

As developed Internet and Computer Capability, Many Users take the many information through the network. So requirement of User that use to network was rapidly increased and become various. But it spend much time to accept user requirement on current network, so studied such as Active network for solved it. This Active node on Active network have the capability that stored and processed execution code aside from capability of forwarding packet on current network. So required execution code for executed packet arrived in active node, if execution code should not be in active node, have to take by request previous Action node and Code Server to it. But if this execution code take from previous active node and Code Server, bring to time delay by transport execution code and increased traffic of network and execution time. So, As used execution code stored in cache on active node, it need to increase execution time and decreased number of request. So, our paper suggest ANC caching technique that able to decrease number of execution code request and time of execution code by efficiently store execution code to active node. ANC caching technique may decrease the network traffic and execution time of code, to decrease request of execution code from previous active node.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.74-81
• /
• 2014

Purpose: While studies have examined microleakage in endodontically treated teeth restored with posts, microleakage among post and adhesive systems remains a concern. This study compared the sealing properties of 3 adhesively luted post systems. Materials and methods: Thirty-six endodontically treated permanent maxillary central incisors were divided into 3 groups: Zirconia-glass fiber, Quartz-glass fiber, Polyethylene fiber posts. Post space was prepared and each post was adhesively luted with 3 systems. The specimens were separately immersed in freshly prepared 2% methylene blue solution for 1 week. The cleaned specimens were then embedded in autopolymerizing acrylic resin. The root portion of tooth were horizontally sectioned into three pieces (apical, middle, and coronal portions). An occlusal view of each section was digitally photographed with a stereomicroscope. The methylene blue-infiltrated surface for each specimen was measured. Dye penetration was estimated as the ratio of the methylene blue-infiltrated surface to the total dentin surface. Results: No significant differences were found among post types. The variables of middle section and 3-stage adhesive produced significant differences in microleakage between the following post pairs: zirconia-glass fiber versus quartz-glass fiber, zirconia-glass fiber versus polyethylene fiber, and quartz-glass fiber versus polyethylene fiber (P<.05). There were significant differences between the apical and coronal sections of each post type, and between apical versus middle sections of quarze-glass fiber and polyethylene fiber posts (P<.05). Conclusion: No significant differences were found among post types. The 3-stage adhesive produced significant differences in microleakage between the following post pairs.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.3
• /
• pp.180-190
• /
• 2014

It has been customary to exclude top 10-20% of velocity profiles in the Acoustic Doppler Current Profiler (ADCP) measurement due to side lobe effects at the boundary. To better understand the mixing in the Yeongsan estuary, the freshwater advection speed (FAS) was recovered from highly contaminated ADCP data near the surface. The velocity profiles were measured by using ADCP at two stations in the Yeongsan estuary during August 2011: one was located in front of the Yeongsan estuarine dam and the other was deployed near Goha Island. The FAS was recovered from the ADCP data set by applying rigorous post-processing methods and compared with the sediment advection speed (SAS). The SAS was determined by the peak time difference of suspended sediment concentration between two stations in the channel, divided by the distance of two stations. The FAS and the SAS showed very similar value when the freshwater discharge was greater than $2.0{\times}10^7$ ton and the SAS was a bit greater when the freshwater discharge was smaller. Since the FAS was on average about 0.8 m/s greater than the velocity at 0.8 of water depth from the bottom, the net discharge, estimated with recovered FAS and integrated over water depth and tidal cycle, was directed seaward during the high discharge contrary to the onshore direction of the net discharge estimated with 0.8 of water depth from the bottom. Moreover, the velocity shear and Richardson number changed when the FAS was used. Thus, the importance of the true FAS is appreciated in the investigation of the surface layer stability. If currents, temperature and salinity were observed for longer time in the future, it could be possible to more accurately understand the formation and decay of stratification as well as the suspended sediment transport processes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.4
• /
• pp.235-244
• /
• 2004

In this study, we compared the levels of methylotrophic bacterial community diversity in the leaf samples of 19 rice cultivars collected from three regions of Korea. Nineteen pink pigmented isolates showing characteristic growth on methanol were obtained. Physiological and biochemical characters of each isolate were examined according to methods described in Bergey's Manual of Systematic Bacteriology. When phylotypes were defined by performing numerical analysis of 37 characteristics, four distinct clusters were formed. The two reference strains, Methylobacterium extorquens AM1 and Methylobacterium fujisawaense KACC10744 were found to group under cluster IV and cluster III respectively. Cluster I diverged on the basis of nitrate reduction and four isolates showed tolerance upto 0.5 M NaCl concentrations. Two strains in cluster I and III were found to possess methane utilizing properties. Most of the isolates in all the four clusters utilized monosaccharides, disaccharide and polyols as carbon source. When the isolates were subjected for indole-3-acetic acid (IAA) analysis in the presence of L-tryptophan, only 8 isolates exhibited IAA production. In addition, the nitrogen source in the medium was found to influence the IAA production. Addition of $(NH_4)_2SO_4$ in the medium led to a 2 to 30 fold increase in the indole synthesis. However, $KNO_3$, $NH_4NO_3$ and $NH_4Cl$ substitution did not significantly stimulate the synthesis of IAA in the growth medium. Result of gnotobiotic root elongation assay significantly increased roots and shoots lengths, and number of lateral roots, which is mediated by IAA production in the culture medium. The rice seedlings primary roots from seeds treated with methylotrophic isolates were on average 27 to 56% longer than the roots from seeds treated with the uninoculated seeds. In addition, application of different high concentrations of authentic IAA ($400g\;mL^{-1}$) to roots of rice seedlings inhibited root growth. However, the IAA concentration from 10 to $200g\;mL^{-1}$, IAA promoted root growth of rice seedlings. These results suggest that bacterial IAA plays a major role in the development of the host plant root system.