• Bulletin of the Society of Naval Architects of Korea
• /
• v.46 no.3
• /
• pp.14-20
• /
• 2009

• Bulletin of the Society of Naval Architects of Korea
• /
• v.51 no.4
• /
• pp.15-20
• /
• 2014

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.132-133
• /
• 2000

최근, 인터넷 등의 보급으로 인하여 급증하는 다양한 형태의 정보를 효과적으로 전송하기 위하여 파장분할다중화 광통신시스템 (wavelength division multiplexed optical communication system: WDM)이 활발히 개발 및 보급되어 왔다. 가변 광감쇠기는 각 파장별 광신호의 세기를 균일하게 하여 장거리 전송을 가능하게 하는 WDM시스템의 핵심 소자이다. 폴리머 소자는 제작이 간편하고 가격이 저렴할 뿐 만 아니라 다른 소자와의 집적이 용이하고, 열광학 계수가 실리카에 비하여 10배 정도 커서 구동전력을 크게 줄일 수 있는 등의 장점으로 인하여 폴리머 광감쇠기가 활발하게 연구되어 왔다$^{(1)}$ . 본 논문에서는 미세 가공된 멤브레인형$^{(2)}$ 도파로를 이용한 저전력 폴리머 가변 광가쇠기에 관한 것이다. (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.868-875
• /
• 2000

이 연구의 목적은 당사에서 제작한 멤브레인형 $130,000M^3$와 $135,000M^3$ LNG 운반선의 진동특성을 파악하고, 거주구역의 진동수준을 예측하기 위함이다. 우선 공진 회피의 관점에서 최적의 프로펠러를 선택하기 위해 간단한 계산을 수행한 후, 주변 해수를 고려한 선박 전체를 모델링하여 3차원 유한요소해석을 수행한다. 이 계산은 보다 정확한 고유진동수를 결정하고, 프로펠러 기진의 주파수 범위에서 관련된 모드 형상을 결정하며, 선박 거주구에서 기대되는 진동수준은 잘 예측할 수 있다. 다음으로 선박이 진수되고 전체구조가 조립된 후 안벽에서 불평형 가진기를 이용해 가진기테스트를 실시하고, 해상시운전 중에도 동일한 방법으로 테스트를 실시한다. 시험은 고유진동수의 항으로 선박의 실제진동응답과 계산결과와의 좋은 비교를 가능하게 한다. 추가적으로 실제 엔진을 구동해 RPM을 최저에서 최고까지 천천히 변경하면서 실제 운항 중 진동응답을 계측함으로서 고유진동수를 예측하여 해석결과 및 가진기 시험결과와 비교한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.287-288
• /
• 2009

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.48-56
• /
• 2007

Wash primer was applied to cargo tank of Membrane-LNG Carrier (M-LNGC) for corrosion resistance and high bond-strength with the mastic. However, a lack of bond-strength verification at high thickness wash primer coating resulted in strict coating thickness control. Therefore wash primer was controlled below DFT(Dry Film Thickness) $30{\mu}m$. In order to develop the wash primer satisfying GTT (GAZ TRANSPORTAION TECHNIGAZ) standard even at high thickness, we evaluated coating properties such as wash primer/mastic bond-strength, corrosion resistance, as well as workability for the newly formulated wash primer materials. The newly formulated wash primer had high bonding-strength to mastic even at high thickness and had proper corrosion resistance and workability suitable to yard condition.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.2
• /
• pp.162-169
• /
• 2016

A new concept of membrane type LNG CCS was proposed. Also, its static behavior was numerically analyzed considering the interaction between primary and secondary barrier together with securing device. Hull deflection was taken into account as an external load, together with temperature distribution across the barriers. The suggested numerical model considers both sliding and contact between the two mating surfaces of both the primary and secondary barrier, and anisotropic material behavior of plywood, R-PUF was also taken into account. Furthermore, detailed local strength was evaluated for the securing device, which is arranged between two barriers to hold the primary barrier. It was confirmed through the numerical analysis that the new concept of membrane type CCS was structurally safe under static loading condition and securing concept was structurally reliable.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.225-231
• /
• 2013

Liquefied gas carriers generally transport cargoes of flammable or toxic nature. Since these cargoes may cause an explosion, fire or human casualty, the accommodation spaces, service spaces and control stations of liquefied gas carriers should be so located as to avoid ingress of gas. For this reason, the paragraph 8.2.9 of IGC Code in IMO requires that the height of vent exits should be not less than B/3 or 6 m whichever is greater, above the weather deck and 6 m above the working area and the fore and aft gangway to prevent any concentration of cargo vapor or gas at such spaces. Besides as known, the LNG market has been growing continually, which has led to LNG carriers becoming larger in size. Under this trend, the height of a vent will have to be raised considerably since the height of a vent pipe is generally decided by a breadth of a corresponding vessel. Accordingly, we have initiated an examination to find an alternative method which can be used to determine the safe height of vent masts, instead of the current rule requirement. This paper describes the dispersion characteristics of boil-off gas spouted from a vent mast under cargo tank cool-down conditions in the membrane type LNG carriers.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.71-78
• /
• 2015

The reliable sloshing assessment methods for LNG CCS(cargo containment system) are important to satisfy the structural strength of the systems. Multiphase fluid flow of LNG and Gas Compressibility may have a large effect on excited pressures and structural response. Impinging jet model has been introduced to simulate the impact of the LNG sloshing and analyze structural response of LNG CCS as a practical FSI(fluid structure interaction) method. The practical method based on fluid structure interaction analysis is employed in order to evaluate the structural strength in actual scale for Mark III CCS. The numerical model is based on an Euler model that employs the CVFEM(control volume based finite element method). It includes the particle motion of gas to simulate not only the interphase interaction between LNG liquid and gas and the impact load on the LNG insulation box. The analysis results by proposed method are evaluated and discussed for an effectiveness of FSI analysis method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1192-1200
• /
• 2008

This paper is concerned with the thermal design of the $138,000m^3$ class membrane type LNGC. To predict the temperature distribution, BOG and BOR, 3-dimensional numerical calculation was carried-out for the quarter of No.3 LNG tank. These sequence analyses were performed under the standard conditions of IMO ship design condition, USCG ship design condition and the Korean flag LNGC's route condition according to the 6-voyage modes. As the results, temperature behavior, heat flux, total penetrating heat, BOG and BOR were obtained, and those were compared with the maneuvering results considering the real temperature variation of air and sea water temperature at noon time. For securing the safety of LNGC during the ballast voyage, optimum control patterns of pressure and temperature in LNG tank is suggested in this paper.