• Title/Summary/Keyword: 매립사업

Search Result 147, Processing Time 0.027 seconds

A Stability Design of Riprap for Revetment Structures Remodeling in the West Coast Area (서해 연안 호안구조물 리모델링을 위한 사석재의 안정설계)

  • Yu, In-Sang;Park, Jong-Ryul;Oh, Kuk-Ryul;Kim, Kee-Dong;Jeong, Sang-Man
    • Proceedings of the KAIS Fall Conference
    • /
    • 2010.11a
    • /
    • pp.28-31
    • /
    • 2010
  • 충청남도 서해안은 생태환경의 보고로서 갯벌, 사구, 해안습지 등 독특한 자연적 특성을 갖고 있는 지역이다. 그러나 다른 지역에 비해 대규모 간척 및 매립으로 인한 해양생태계 피해에 현저히 노출되어 있고, 최근 산업화 및 관광권화가 진행되고 있으며 해안선 침식 방지를 위한 연안정비사업으로 각종 연안 방호구조물이 건설되었다. 이 중 가장 많이 건설된 연안 호안구조물은 배후지역의 안정성 확보, 해안도로의 건설 등 다양한 목적으로 축조되었다. 그러나 성장위주의 경제정책으로 연안 호안구조물이 무분별하게 설치되어 파도와 호안 구조물의 접촉 시 호안구조물이 파랑을 견디지 못해 사면피복재가 산란되어 외관상 주변 환경을 해칠 뿐만아니라 2차 피해까지 야기 시킬 우려가 있다. 본 연구에서는 호안구조물의 리모델링을 통해 안정성을 증대시키기 위해 서해 연안지역의 4개 시 군 29개 지점을 대상으로 호안구조물 현황에 대해 조사하고 호안구조물의 리모델링을 통해 붕괴된 지역을 대상으로 파랑에 대해 안정한 사석재 소요질량을 호안구조물의 경사 별로 산정하여 비교하였다. 피복재 소요질량 산정을 위한 설계파고는 유의파고를 적용하였으며, 산정공식은 허드슨공식(Hudson, 1959)을 사용하였다. 추가적으로 사석 층의 두께와 단위면적당 수용해야할 사석재의 개수를 산정하여 호안구조물 설계 시 사석재의 배치를 용이하게 할 수 있도록 하였다. 본 연구에서 산정된 값들은 초기설계로서 파랑에 안정한 호안구조물의 설계 조건 중 일부분으로 호안구조물의 최종 설계 시 조파실험을 통하여 안정성을 검증 해야 할 것으로 판단된다.

  • PDF

Characteristics of Structure Settlement due to Urban Railway Construction on Reclaimed Land (해안매립지반의 도시철도 시공에 따른 구조물 침하 특성 분석)

  • Shin, Eun-Chul;Rim, Yong-Kwan;Park, Jeong-Jun
    • Journal of the Korean Geosynthetics Society
    • /
    • v.11 no.1
    • /
    • pp.23-33
    • /
    • 2012
  • The stability of urban railway foundation can be a problem due to the excessive settlement. The settlement at the base of railway is monitored by the installed settlement gauges. The piezometer and pore water pressure measurement device are installed to measure the variation of pore water pressure and ground water table during the continuous pullout of sheet piles which were used for the braced cut. The settlement of railway is predicted with using the computer program CAIN RDA. The input data for the numerical analysis are obtained from the field soil exploration data and soil properties. The surcharged load from landscaping over the ground surface and the weight of train are taken into account for the estimation of settlement. As a result of numerical analysis, the range of settlement for six different Sites is from 5.94 cm to 12.77 cm. Thus, the settlement level at Site 2 is occurred 12.77 cm which is higher than the allowable settlement of 10 cm.

Development and application of cohesive sediment transport model (점착성 유사의 이동 모형화 및 적용)

  • Son, Min-Woo;Lee, Guan-Hong
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.331-335
    • /
    • 2011
  • 흔히 진흙으로 불리는 점착성 유사는 모래 등의 비점착성 유사와는 다른 특성을 보인다. 가장 큰 특징은 점착력에 의해 서로 엉겨 붙어 큰 덩어리(플럭)를 형성하고 다시 큰 플럭이 파괴되는 과정인 응집현상(Flocculation Process)을 보인다는 것이다. 이 응집현상의 과정을 통해 플럭은 크기 및 밀도를 지속적으로 변화시킨다. 크기 및 밀도의 변화는 플럭의 침강속도를 변화시켜 점착성 유사의 부유, 퇴적, 이송, 확산의 과정에 직접적인 영향을 미친다. 응집현상은 플럭의 침강속도 뿐 아니라 부피농도와 질량농도 사이의 비선형적 관계를 야기하여 흐름 운동량 방정식 유도, 난류의 모형화 등에서도 비점착성 유사와 다른 방향으로 진행된다. 점착성 유사가 우세한 지역의 또 다른 특성은 자기하중에 의한 압밀현상에 따라 발생하는 가변적인 한계소류력이다. 따라서 점착성 유사의 이동을 모형화 하는 과정에서는 가변적인 침식율의 가정 등을 통해 이에 대한 고려가 반드시 이루어져야 한다. 흐름의 운동량 방정식 및 난류 모형에서는 플럭의 부피 농도와 질량농도가 각 항의 물리적 의미에 부합하도록 개별적으로 선택 및 적용되어야 질량보존의 문제 등으로 발생할 수 있는 계산상의 오류를 배제할 수 있다. 적용 결과, 점착성 유사가 우세한 지역에서 나타나는 높은 부유 및 흐름정체기에서의 부유사 존재 등의 특성이 점착성 유사 이동을 위한 모형에서 보다 합리적으로 계산된다는 사실이 확인되었다. 그리고 비점착성 유사에 적합한 이동 모형이 점착성이 우세한 지역에 적용될 경우, 상황에 따라 유사량을 과대 및 과소 산정할 수 있다는 결론이 도출되었다. 조류의 영향이 존재하는 하구부의 경우에는 조류의 형태와 비대칭성에 따라 유사량의 차이가 큰 것으로 나타났다. 조류의 형태는 주로 하구부의 지형에 의해 결정되므로 준설, 매립, 확폭 등과 같은 하구부에서의 사업이 진행되는 경우, 유사량 변화에 대한 고려가 반드시 이루어져야 할 것으로 판단된다.

  • PDF

A Case Study of Site Investigation on XX Gas Station (국내토양오염 유발시설별 오염현황 조사 - XX 인근주유소 오염현황조사 -)

  • 김무훈;강순기;곽무영
    • Journal of Korea Soil Environment Society
    • /
    • v.3 no.1
    • /
    • pp.21-30
    • /
    • 1998
  • The purpose of this study is to assess contaminant transfer and environmental impacts to the surroundings by inadequate control of USTs. Several methodologies can be used to approach for the site assessment depending on the appearance of contaminants on the site and their types. In this case study, randomized and/or triangle matrix techniques were used. As a result, the composition of materials in tank station were appeared in several state. From 1 to 1.5m depth, the soil was composed of reclaimed soils. And 1.8-3.5m depth, silty sand was appeared and about 4m, weathered soil was appeared. Based on the preliminary and actual site investigation by DPT methodologies on the width and depth of the site with analysis of BTEX and TPH, the contamination was found in this tank station and already distributed near areas. Finally, it was found that the hydroflow differences during the season affects the area and depth of contamination.

  • PDF

A Case Study on the Effect of Hydraulic Characteristics and Dredging time on the Bed Change using SCHISM model (SCHISM을 이용한 하상변동에 따른 수리영향 및 준설시기 검토)

  • Yoo, Hyung Ju;Jeong, Seok il;Lee, Seung Oh
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.128-128
    • /
    • 2017
  • 준설(Dredging)은 수중에서의 토사굴착이며, 하천유로의 확장, 항만의 수심증가, 매립이나 축제용의 토사채취 등의 목적으로 행해진다. 하천의 준설은 하천의 흐름 특성 및 제반 여건 변화를 가져오기도 한다. 준설 직후 낮아진 하상으로 수위가 낮아지는 경우가 있는 반면, 수위 저하를 동반하지 않는 경우 준설 부근에서 퇴적이 발생하며 이는 하천의 수위 상승으로 이어 질 수 있다. 또한 퇴적으로 인하여, 최심 하상고가 높아지면 상승정도에 따라 준설 시기를 결정해야 한다. 따라서 본 연구는 SCHISM(Semi-implicit Cross-scale Hydroscience Integrated System Model)모형을 이용하여 이상화 수로에서 준설로 인한 하상변동 후 기존 단면으로 복구되기까지 소요되는 시간과 그에 따른 하천의 수리특성 영향을 검토하였다. SCHISM 수치모형은 Virginia Institute of Marine Science의 Dr. Zhang 교수가 개발한 3차원 수치모의 프로그램으로 현재 중국에서 황허강(Yellow River)의 하상변동 관련 연구를 수행하는데 많이 사용되고 있다. 하천 지형은 이상화 수로로 하천설계기준(2009)을 참고하여 제방 경사는 1:3이며, 수로 제원은 4대강 살리기 사업을 통하여 준설이 실시된 국가하천 자료를 참고하였다. 격자간격은 10 m인 사각격자 이며 모의 시간은 하상변동을 일으키는 유량 개념인 유효유량을 적용하여 60일로 설정하였다. 수치모의를 통하여, 최심 하상고 변화 및 하상변동량을 확인하여 침식 및 퇴적 구간을 구분하였고, 시간에 따른 기준 단면으로의 복구 정도를 유량과 유사량을 변경하면서 민감도 분석을 수행하였다. 향후 본 연구는 하천 준설 계획 시 참고자료로 활용이 가능할 것이며, 준설로 인한 하천수리특성 변화 및 준설시기 결정의 선행연구로써 의미가 있다고 판단된다.

  • PDF

Development of Random Forest Model for Sewer-induced Sinkhole Susceptibility (손상 하수관으로 인한 지반함몰의 위험도 평가를 위한 랜덤 포레스트 모델 개발)

  • Kim, Joonyoung;Kang, Jae Mo;Baek, Sung-Ha
    • Journal of the Korean Geotechnical Society
    • /
    • v.37 no.12
    • /
    • pp.117-125
    • /
    • 2021
  • The occurrence of ground subsidence and sinkhole in downtown areas, which threatens the safety of citizens, has been frequently reported. Among the various mechanisms of a sinkhole, soil erosion through the damaged part of the sewer pipe was found to be the main cause in Seoul. In this study, a random forest model for predicting the occurrence of sinkholes caused by damaged sewer pipes based on sewage pipe information was trained using the information on the sewage pipe and the locations of the sinkhole occurrence case in Seoul. The random forest model showed excellent performance in the prediction of sinkhole occurrence after the optimization of its hyperparameters. In addition, it was confirmed that the sewage pipe length, elevation above sea level, slope, depth of landfill, and the risk of ground subsidence were affected in the order of sewage pipe information used as input variables. The results of this study are expected to be used as basic data for the preparation of a sinkhole susceptibility map and the establishment of an underground cavity exploration plan and a sewage pipe maintenance plan.

An Economic Effect Analysis on Remanufacturing Part of Automobile (자동차부품 재제조에 따른 품목별 경제성 효과 분석 연구)

  • Ko, Kwang-Hoon;Bae, Yun-Jung;Moon, Jin-Young;Kang, Hong-Yoon;Hwang, Yong-Woo
    • Resources Recycling
    • /
    • v.28 no.4
    • /
    • pp.37-43
    • /
    • 2019
  • Due to environment problems in end of Life Vehicle in the country, the interest in remanufacturing is heightened than ever. In this study, it is important to quantitatively evaluate the economic effect of the introduction of the automotive remanufacturing business and analyzed cost-benefit for the three species of bumpers, doors, fenders, which is relatively lower remanufactured automotive component. The results showed that cost-beneift of each parts were analyzed 54,000 per one part, and if remanufacturing were 50%, benefits were to occur with a profit of 226,060 won. Thus, remanufacturing of bumpers, doors, fender resulted a significant benefit, and then it is possible that remanufacturing company have enough economic value for remanufacturing.

A Study on the Geotechnical Characteristics of Jeju Area Using Field Tests (현장시험을 이용한 제주지역의 지질특성에 관한 연구)

  • Byung Jo Yoon;Sung Yun Park;Seung Jun Lee
    • Journal of the Society of Disaster Information
    • /
    • v.18 no.4
    • /
    • pp.769-777
    • /
    • 2022
  • Purpose: This study analyzes and studies the characteristics of the Jeju area and uses them as basic data such as construction method design in the future development project. Method: Based on the ground survey data of the construction conducted in Jeju, the depth, relative density, N value, function state, color tone, groundwater level, and compressive strength were analyzed and studied. Result: Studies show that Jeju has columnar joints consisting of ancient volcanic activity and rapid cooling by nearby seawater, thick sand layers found on the coast, and clinker layers and Seogwipo layers formed by Mercury volcanic activity. Conclusion: It is hoped that it will be used as data for selecting basic design and basic construction method by understanding the special ground form of Jeju area and reflecting its characteristics well when designing construction.

A Study on Flood and River Maintenance of Cheonggye-cheon Stream in the Josun Dynasty (조선시대 청계천의 홍수와 하천정비 연구)

  • Kim, Hyeon-Jun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.209-213
    • /
    • 2006
  • 청계천이 복원되었다. 서울시에 의하여 지난 2003년 7월부터 시작된 복원공사가 2005년 10월 준공되었다. 원래부터 청계천은 인공의 하천이었다. 조선왕조 520년의 기틀을 다지면서, 도성에 있는 자연하천을 직강화하고 양안에 석축을 쌓아 개천으로 만들었던 것이다. 하천에 인위적인 요소를 더한 것은 전적으로 홍수의 피해를 줄이기 위해서였다. 조선왕조실록에는 태종부터 헌종까지 도성에서 발생한 큰 홍수기록이 10건 소개되어 있다. 특히, 순조 32년(1832)과 헌종 12년(1846)의 피해가 컸었다. 순조 32년 6월부터 7월초까지 비가 오지 않은 날이 없다고 하였으며, 도성내 5부의 민가가 파괴된 것은 3,166호였고 죽은 자는 64명이었다. 헌종 12년 9월에도 큰 피해가 있었는데, 5부에 무너진 민가가 3,900여호나 되었다. 4대문 안의 서울은 북악산과 남산으로부터 가파르게 흐른 물이 고이기 쉬운 저지대를 형성하고 있기 때문에 침수 피해가 자주 발생하였다. 개국 초기에 여러차례의 홍수피해를 당한 후에, 태종의 본격적인 하천정비 사업은 세종 때에 완성되어 오늘날 청계천의 기본 모습을 갖추게 되었다. 임진왜란이후 개천은 상류에서 쓸려내여온 토사가 쌓여 하천으로서의 구실을 다하지 못하였다. 영조 때에는 매립된 토사로 인하여 하천 바닥이 높아졌고, 양안의 도로와 거의 같은 높이가 되었다고도 한다. 이에 영조는 대대적인 준설 사업을 펼쳤고 조선이 폐망할 때까지 주기적으로 준설을 하였다. 준설만을 한 것은 아니었다. 세종은 측우기의 발명과 함께 한강과 개천의 수위를 측정할 수 있도록 수표(水標)를 제작하였고, 역대 왕들은 큰 비가 오면 강우량과 함께 하천의 수위를 점검하였었다. 청계천을 중심으로 자연의 거친 손길에 대응하여 안정된 사회를 만들고자 조선의 왕들과 관리 그리고 백성들은 많은 노력을 기울였다. 본 고에서는 이러한 선조들의 발자취를 따라서 그 흔적들을 소개하고자 한다.없는 토양들이 있었는데 반해 남계통을 비롯한 학곡통, 회곡통, 백산통, 상주통, 석천통, 예산통 등 7개의 토양은 3kPa에서도 약간의 물의 이동이 있었다. 이는 모암이 화강 편마암인 관계로 토양 내에 물의 이동에 영향을 미치는 자갈의 함량이 높았기 때문일 것으로 생각되고 추후의 연구에서는 이 부분에 대한 내용도 검토되어야 할 것이다. 또한, 1kPa에서 물의 이동은 삼각통에서 35.21 cm/day로 이동 속도가 가장 컸으며 그 뒤로 예산통, 화봉통, 학곡통, 백산통 등이 토양에서 빠른 속도로 이동하였다. 가천통이나 석천통 및 우곡통은 1kPa에서의 이동 속도가 아주 느린 토양으로 판단되었다. 또한, 포화되지 않은 상태인 1kPa에서 물의 이동 속도를 VGM 모형에 의해 예측된 값과 측정된 값으로 비교하였을 때 불포화 수리 전도도가 예측되지 않은 토양(석천통, 지곡통, 풍천통)이 존재하여 불포화 수리 전도도 특성평가에 대한 VGM 모형의 적용성에 문제를 보였다. 이는 결과적으로 논이라는 영농형태가 존재하는 우리나라에서 토양의 수리적 특성해석을 위한 VGM 모형의 적용성에 한계가 있을 것으로 판단되었다.4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전략을 개발 및 활용할 수 있으며, 특히, 한국주식시장에 적합한 거래전략은 반전거래전략이고, 이 전략의 유용성은 투자자가 설정한 투자기간보다 더욱 긴 분석기간의 주식가격정보에 의하여 최대한

  • PDF

Feasibility of Present Soil Remediation Technologies in KOREA for the Control of Contaminated Marine Sediment: Heavy Metals (우리나라 현존 토양정화 기술의 해양오염퇴적물 정화사업 적용 가능성 검토: 중금속)

  • Kim, Kyoung-Rean;Choi, Ki-Young;Kim, Suk-Hyun;Hong, Gi-Hoon
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.32 no.12
    • /
    • pp.1076-1086
    • /
    • 2010
  • Soil remediation technologies were experimented to evaluate whether the technologies could be used to apply remediation of contaminated marine sediment. In this research, marine sediments were sampled at "Ulsan" and "Jinhae" where remediation projects are considered, and then the possibility of heavy metal removal was evaluated throughout the technologies. Heavy metal concentration of silt and clay fraction was higher than that of sand fraction at "Ulsan". Heavy metal removal of the silt and clay fraction was arsenic (As) 81.5%, mercury (Hg) 93.8% by particle separation, cadmium (Cd) 72.2%, mercury (Hg) 93.8% by soil washing technology, cadmium (Cd) 70.8%, lead (Pb) 65.6% by another soil washing technology. Based on experimental results, tested particle separation and soil washing technologies could be used to remove heavy metals of sand fraction and silt and clay fraction. Heavy metal removal by soil washing technology which was composed of separation, washing and physical or chemical reaction by additives such as acid, organic solvents was more effective comparing to that of particle separation. Since heavy metal concentration of all treated samples was suitable for national soil standards, all the tested technologies were could be used not only to remove heavy metals of marine contaminated sediment but also to reuse treated samples in land.