• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.3
• /
• pp.157-162
• /
• 2005

This paper presents an adaptive compensator using the fuzzy systems for robot manipulator with unknown frictions. In general, frictions are neglected or dynamic frictions are only considered in robot control theories. The proposed control method considers viscous frictions as well as dynamic frictions. Using the property that the frictions of joints are decoupled, SISO-fuzzy systems are utilized to approximate each friction. The stability of overall control system is proven and the adaptive laws are derived based on Lyapunov stability theorey. To verify the validity of the proposed control strategy, the results of computer simulations are shown for 2-link robot manipulator. The ability of approximating of the fuzzy system is also shown.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.55-64
• /
• 2007

In general mechanical servo systems, friction deteriorates the performance of controllers by its nonlinear characteristics. Especially, friction phenomenon causes steady-state tracking errors and limit cycles in position and velocity control systems, even though gains of controllers are tuned well in linear system model. Even if sensor is used higher accuracy level, it is difficult to improve tracking performance of the position to the same level with a general control method such as PID type. Therefore, many friction models were proposed and compensation methods have been researched actively. In this paper, we consider that the variation of mover's mass is various by loading and unloading. The normal force variation occurs by it and other parameters. Therefore, the proposed control system is composed of main position controller and a friction compensator. A parameter estimator for a nonlinear friction model is designed by adaptive control law and adaptive backstepping control method.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.4
• /
• pp.130-135
• /
• 1998

This paper deals with a position control problem of a hydraulic proportional position control system using a friction compensation control. There are many nonlinearities in hydraulic systems. With only proportional controller, response is slow and steady-state error cannot be compensated properly. Controller designed in this paper achieves fast transient response through the velocity and acceleration feedback and good steady-state response through the friction compensator. A/D and D/A board is employed for data acquisition and manipulation. The experimental results are compared with computer simulation results using Matlab.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.976-977
• /
• 2006

선형전동기와 같은 선형운동을 하는 기기에서 원형운동을 하는 경우 속도가 0 이되는 부분에서 비선형적인 마찰력이 작용하며 이로 인한 운동괘적의 외곡 현상이 발생한다. 본 연구에서는 이러한 마찰력을 비롯한 모든 외란을 하나의 비선형적인 외란으로 간주하여 실용적으로 사용할 수 있는 간단한 형태의 외란 관측기를 제시한다. 또한 모든 외란 관측기에서 피할수 없는 문제의 하나인 전동기 관성(모멘트)의 변동 문제를 해결하기 위하여 제한적이지만 매우 효과적으로 관성을 추정해낼 수 있는 새로운 방법을 제안한다.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2558-2560
• /
• 2005

본 논문에서는 마찰력과 질량은 수직항력에 의해 관계하고, 시스템 입출력 관계에서도 도출할 수 있음에 착안하여, LuGre 모델을 기반으로 하는 수직항력 관측이 가능한 보상기 적용과 동시에 제어 입력과 시스템 출력 관계를 적응규칙을 통해 질량추정기를 설계하여 제어 입력의 스케일로 사용함으로써 그 성능을 더욱 향상시키고자 하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.2
• /
• pp.139-148
• /
• 1997

본 논문에서는 비선형 마찰이 존재하는 조준경 안정화 시스템에 대해서 마찰력 보상과 성능개선을 위한 신경망제어기의 설계방법을 제시한다. 제안한 신경망제어기는 비례, 적분, 진상(PI/LEAD) 제어기와 신경회로망과의 병렬로 구성되며, 제어 목적은 비선형 마찰과 외란이 존재하여도 안정거울의 각속도 추적성능과 안정화 성능의 향상에 있다. 신경회로망의 입력으로 안정거울의 각속도 추적오차와 추적오차의 적분, 제어입력이 필터를 통과한 신호가 사용되며, 신경호로망은 간접학습구조에 의해 학습된다. 조준경 시스템의 비선형 마찰력인 쿨롱마찰력의 크기가 외부환경에 따라 변하는 경우와 시스템으로 외란이 인가되는 경우에 대하여도 제안한 병렬제어기는 기존의 PI/LEAD 제어기보다 추적과 안정화 성능면에서 우수함을 컴퓨터 모의 실험으로 확인한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.883-888
• /
• 2011

Laparoscopic surgery is being used in various surgical fields because it minimizes scarring. Laparoscopic operations require practical hand skills, so surgeons train on animals and via surgery training tool sets. However, these tool sets do not give the surgeon the sensation of touching real organs. A recently developed laparoscope simulator has a high friction force along the translational axis and a high gravity force along the pitch axis, and therefore it does not permit the operator to control his or her hands delecately. In the paper, the friction force along the axes is auumed to depend on the veolcity, and the gravity force on the angle and distance. We develop a compensation model that combines the gravity and friction force models.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.202-208
• /
• 2014

Friction force on robot systems is highly nonlinear and especially disturbs precise control of the robots at low speed. This paper deals with the dynamic friction compensation problem of a well-known one-link benchmark robot system. We consider the LuGre model because the model can successfully represent dynamic characteristics and various effects of friction phenomenon. The proposed controller is constructed as two parts. An adaptive controller based on dual observers is used to estimate and compensate the dynamic friction. In order to attenuate the friction estimation error and other disturbances, PI observer is additionally designed. Through the computer simulations with the benchmark system, this paper first examines the effects of nonlinear dynamic friction on the control performance of the benchmark robot system. Next, it is shown that the control performance against the dynamic friction is improved by using the proposed controller.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.6
• /
• pp.77-83
• /
• 2003

This paper deals with a position control problem of a hydraulic proportional position control system using a nonlinear friction compensation control. As nonlinear friction, stiction and coulomb friction forces are considered and modeled as deadzone and external disturbance respectively. In order to compensate this nonlinearities, we designed the controller which is the adaptive friction compensator using discrete time Model Reference Adaptive Control method in this paper. Digital Signal Processing board is employed for data acquisition and manipulation. The experimental results show that response is slow and steady-state error cannot be compensated properly without friction compensation but this compensator is effective to obtain fast response and good steady-state response.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.103-105
• /
• 2003

본 논문에서는 이동로봇의 마찰력 보상을 위해 퍼지 외란 관측자를 설계한다. 이동로봇은 주행 바닥면에 따라 주행 특성이 달라질 수 있다. 주행 중 발생하는 마찰력은 비선형적인 특성을 가지므로 이에 검출할 수 있는 퍼지 관측기를 설계하도록 한다. 설계된 퍼지 관측기를 적용함으로써 주행 바닥 면의 상태에 따라 발생하는 마찰력의 영향을 최소화시킴으로써 주행 특성을 효과적으로 개선시킬 수 있다.