• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.4
• /
• pp.382-393
• /
• 2024

The Microplotter system with a fluid dispensing method, sprays fluid based on ultrasonic pumping through piezoelectric devices. This technique can possible for various materials with a wide range of viscosities to be printed in microscale. In this paper, we introduces dispenser printing technology as well as aim to understand and apply various processes using the equipment. In addition, we will explain how to optimize the equipment by adjusting parameters such as spray intensity, tip height during printing, and patterning speed. By utilizing Microplotter's advantage of being compatible with a wide range of fluids, including metal nanoparticles, carbon nanotubes, DNA, and proteins, it is expected to be used in various fields such as printed electronics, biotechnology, and chemical engineering.

• Journal of IKEEE
• /
• v.28 no.3
• /
• pp.337-341
• /
• 2024

As the production process for silicon-based integrated circuits approaches physical limits, a lot of attention is focused on the new semiconductor materials to overcome these problems. Carbon NanoTubes(CNTs) are attracting a lot of interest as one of the most competitive materials with excellent electrical transport and scaling properties, and CNTFETs using CNTs are gaining popularity as next-generation semiconductor devices. However, since the technology to place CNTs in a certain direction and interval on the wafer is not yet mature enough, it is difficult to construct all necessary circuits with CNTFET only. So, there is increasing interest in a hybrid configuration using MOSFET and CNTFET together. Because SRAM plays a role as a cache in microprocessors and is a critical circuit block influencing microprocessor performance, research to implement existing SRAM in a hybrid form is steadily progressing. Therefore, in this paper, we will explain the design method of hybrid 8T SRAM based on the existing hybrid 6T SRAM and discuss the performance difference between the two circuits.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.40.1-40.1
• /
• 2009

생체용 금속 임플란트의 표면개질은 생체활성화를위하여 오래 전 부터 관심을 가지고 연구해오고 있다. 최근에 표면개질을위하여 화학적 에칭, 샌드 블래스팅, 또는 나노튜브형성등 표면에 임의의 요철을 만들어서 사용하는방법이 가장 일반적으로 적용되어 상용화되고있다. 그러나 샌드블래스팅이나 화학적 에칭은 가공은 쉽지만 가공표면에 인체에 해로운 잔류물의존재로 생체적합성에 해로운 영향을 미칠 수 있다. 이러한 문제점들을 해결하기위하여 레이저를 사용하여 임플란트 표면을 개질한 예가 보고 되었다. 레이저를 사용한 표면처리 방법의큰 장점은 잔류물이 남지 않고 비교적 표면 거칠기의 제어가 용이하다. 금속합금의 표면개질에사용되는 레이저는 주로 Nd:YAG 레이저의 파장을 반으로 줄인 녹색레이저 ($\lambda$=532nm)를 사용하거나, 자외선파장영역의레이저를 사용하는 경우가 일반적으로 가장 보 편화된 가공방법으로 연구되었다. 표면의 거칠기는 수마이크로의크기와 수십나노의 크기를 갖는 표면을 생체적합적인 측면에서 요구하고 있다. 따라서 이러한 표면의 거칠기를조절할 수 있는 펨토레이저를 사용하여 표면에 균질한 표면의 텍스춰링을 통하여 그 특성을 개선할 수 있는지를 확인하는 것이 본 과제이다. 본 실험에서는 Ti합금을 진공 아크로를 이용하여 3원계합금을 제조하고 $1000^{\circ}C$에서 24시간 열처리 후 급냉(water quenching)하였다. 열처리 후 시편은 두께 2mm로 절단 하여 #2000까지 연마 후 하여 펨토 초(10-15 second) 펄스폭 대역을 갖는 레이저를 이용하여 수마이크로 크기의 미세 요철을 표면에 형성한 후, 표면의 특성을 조사해 보았다.(NRF-2009-0074672)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.99-100
• /
• 2005

We have grown carbon nanotubes (CNTs) with a microwave plasma chemical vapor deposition (MPECVD) method, which has been regard as one of the most promising candidates for the synthesis of CNTs due to the vertical alignment, the low temperature and the large area growth. We use methane ($CH_4$) and hydrogen ($H_2$) gas for the growth of CNTs. 60 nm thick Ni catalytic layer were deposited on the TiN coated glass substrate by RF magnetron sputtering method. In this work, we report the effects of pressure on the growth of CNTs. We have changed pressure of processing (10 $\sim$ 20 Torr) deposition of CNTs. SEM (Scanning electron microscopy) images show diameter, length and cross section state CNTs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.6
• /
• pp.501-506
• /
• 2006

Carbon nanotubes (CNTs) were grown with a microwave plasma enhanced chemical vapor deposition (MPECVD) method, which has been regarded as one of the most promising candidates for the synthesis of CNTs due to the vertical alignment, the low temperature and the large area growth. MPECVD used methane ($CH_4$) and hydrogen ($H_2$) gas for the growth of CNTs. 10 nm thick Ni catalytic layer were deposited on the Ti coated Si substrate by RF magnetron sputtering method. In this work, the pretreatment was that the Ni catalytic layer in different microwave power (600, 700, and 800 W). After that, CNTs deposited on different pressures (8, 12, 16, and 24 Torr) and grown same microwave power (800 W). SEM (Scanning electron microscopy) images showed Ni catalytic layer diameter and density variations were dependent with their pretreatment conditions. Raman spectroscopy of CNTs shows that $I_D/I_G$ ratios and G-peak positions vary with pretreatment conditions.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.5
• /
• pp.381-388
• /
• 1998

The ultrasonic method, which is well known as non-destructive test method, is widely used to evaluate the material damage caused by degradation practically. However, this method is just used for measuring the crack size and the thickness loss of tube. The purpose of this study is to investigate the applicability of the ultrasonic technique for the evaluation of carburized material and to suggest the correlations between the ultrasonic characteristics and carburized degradation. The miniaturized specimens($40{\times}20{\times}6.3mm$) are adopted from the HK-40 (25Cr-20Ni-0.4C) centrifugal cast tube after carburization treatment. Carburization was carried at $1200^{\circ}C$ by the pack method. The results of ultrasonic test present that the longitudinal wave velocity increased with the increase of carburized depth. The correlation between the longitudinal wave velocity and carburization was changed with the density and Young's modulus. Therefore, the average velocity in the materials carburized for 336 hours and the unused one were 5,840 m/s and 5,755 m/s at 5 MHz, respectively. With the obtained results from this study, it can be recognized that the technique using the ultrasonic velocity property is very useful method to evaluate the degree of carburized material non-destructively.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.95-99
• /
• 2018

High thermal conductivity films with electrically insulating properties have a great potential for the effective heat transfer as substrate and thermal interface materials in high density and high power electronic packages. There have been lots of studies to achieve high thermal conductivity composites using high thermal conductivity fillers such alumina, aluminum nitride, boron nitride, CNT and graphene, recently. Among them, hexagonal-boron nitride (h-BN) nano-sheet is a promising candidate for high thermal conductivity with electrically insulating filler material. This work presents an enhanced heat transfer properties of ceramic/polymer composite films using h-BN nano-sheets and PVA polymer resins. The h-BN nano-sheets were prepared by a mechanical exfoliation of h-BN flakes using organic media and subsequent ultrasonic treatment. High thermal conductivities over $2.8W/m{\cdot}K$ for transverse and $10W/m{\cdot}K$ for in-plane direction of the cast films were achieved for casted h-BN/PVA composite films. Further improvement of thermal conductivity up to $13.5W/m{\cdot}K$ at in-plane mode was achieved by applying uniaxial compression at the temperature above glass transition of PVA to enhance the alignment of the h-BN nano-sheets.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.473-478
• /
• 2021

Although CNTFETs have attracted great attention due to their ability to increase semiconductor device performance by about 13 times, the commercialization of CNTFETs has been challenging because of the immature deposition process of CNTs. To overcome these difficulties, circuit design method considering the known limitations of the CNTFET manufacturing process is receiving increasing attention. SRAM is a major element constituting microprocessor and is regularly and repeatedly positioned in the cache memory; so, it has the advantage that CNTs can be more easily and densely deposited in SRAM than other circuit blocks. In order to take these advantages, this paper presents a circuit design method for SRAM cells considering CNT density and then evaluates its performance improvement using HSPICE simulation. As a result of simulation, it is found that when CNTFET is applied to SRAM, the gate width can be reduced by about 1.7 times and the read speed also can be improved by about 2 times when the CNT density was increased in the same gate width.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1121-1128
• /
• 2022

Information about the present invention is made available for business use. You are helping to use the LCD, you can't use the LCD screen. During software configuration, Raspbian was used to provide the system environment. We made our way through the menu and made our financial through play. It provides various information such as weather, weather, apps, streamer music, and web browser search function, and it can be charged. Currently, the 'Google Assistant' will be provided through the GUI within a predetermined time.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.23-29
• /
• 2017

The packaged optical fiber Bragg grating sensors which were networked by multiplexing the Bragg grating sensors with WDM technology were investigated in application for the structural health monitoring of the marine trestle structure transporting the ship. The optical fiber Bragg grating sensor was packaged in a cylindrical shape made of aluminum tubes. Furthermore, after the packaged optical fiber sensor was inserted in polymeric tube, the epoxy was filled inside the tube so that the sensor has resistance and durability against sea water. The packaged optical fiber sensor component was investigated under 0.2 MPa of hydraulic pressure and was found to be robust. The number and location of Bragg gratings attached at the trestle were determined where the trestle was subject to high displacement obtained by the finite element simulation. Strain of the part in the trestle being subjected to the maximum load was analyzed to be ${\sim}1000{\mu}{\varepsilon}$ and thus shift in Bragg wavelength of the sensor caused by the maximum load of the trestle was found to be ~1,200 pm. According to results of the finite element analysis, the Bragg wavelength spacings of the sensors were determined to have 3~5 nm without overlapping of grating wavelengths between sensors when the trestle was under loads and thus 50 of the grating sensors with each module consisting of 5 sensors could be networked within 150 nm optical window at 1550 nm wavelength of the Bragg wavelength interrogator. Shifts in Bragg wavelength of the 5 packaged optical fiber sensors attached at the mock trestle unit were well interrogated by the grating interrogator which used the optical fiber loop mirror, and the maximum strain rate was measured to be about $235.650{\mu}{\varepsilon}$. The modelling result of the sensor packaging and networking was in good agreements with experimental result each other.