• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.3
• /
• pp.281-291
• /
• 1992

This paper deals with the digital autopilot implementation for a launch vehicle. We propose a hardware and software system for digital autopilot implemented by microprocessor. The hardware system designed in this paper consists of CPU and memory board with 80286 MPU and 80287 NPU and I/O interface with A/D and D/A converters. The software system developed is composed of power-on self-test program, initializing program, interrupt service program, and control program. The performance of the overall system controlled by the digital autopilot implemented in this paper is evaluated via real-time simulations, which show that the control performances are satisfactory.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.345-349
• /
• 2009

This test cell is developed to the institutes or laboratories research and study gas turbine engine for academic purpose with this test data to provide the fundamentals of operational mechanism and structural configuration, and further to verify thermodynamic calculation The test cell is installed to monitor and compare real-time data with reference engine model performance simulation data. using by NI DAQ(Data acquisition)device and LabVIEW program based on 30lbf-micro turbojet engine.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.495-498
• /
• 2010

This test cell is developed to the institutes or laboratories research and study gas turbine engine for academic purpose with this test data to provide the fundamentals of operational mechanism and structural configuration, and further to verify thermodynamic calculation The test cell is installed to monitor and compare real-time data with reference engine model performance simulation data. using by NI DAQ(Data acquisition)device and LabVIEW program based on 80 lbf-micro turbojet engine.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.9
• /
• pp.1307-1312
• /
• 2013

In this paper, alkaline or acidic solution, in particular the principle of electrolysis to oxidize the metal surface to form a device isolation film is developed. In the past, mainly in the form of pulse voltage is applied to the anode only a unipolar method, but in this paper by using the H-bridge to the amount of the positive (+) voltage and the negative supply voltage, alternating voltage polarity devices were fabricated according to the characteristics of metal specimens with different electrical conditions to form an oxide film on the device was developed. Supply current variable was used for the PWM modulation, (+) and (-) polarity change of the H-bridge bipolar pulse voltage to supply the was that. As a result, a more uniform pores with unipolar film was formed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.4-4
• /
• 2010

Multi Cultivation Remote-control System(MCRS) for crops through characteristics of multi-safe sensors was realized. It was carried out to investigate into the effect of LED Control with the physiological activity of crops(for examples, sprouts). We have also composed a Combined Automatic Control System possible for the control of temperature and humidity at the same time. And we producted the remote control as using Linux.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.6
• /
• pp.33-37
• /
• 1980

The information display control system is designed and implemented on an automobile in which the conventional panel displays are replaced by electronic ones. The system hardware consists of three main parts, i. e., (i) the function select keyboard (ii) the central processing unit (iii) the displays, The system software consists of main routine and several interrupt service routine such as keyboaiuand display interrupt service routine:. The main routine handles various sensor inputs to generate the appropriate information for the driver such as running speed, available fuel quantity. coolant temperature, battery voltage, remaining distance to the destination , time of day, and so on. Finally the results of the field test of the system and some associated difficulties of realization problems are discussed.

• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.72-76
• /
• 1996

Hot air drying of Lentinus edodes was studied using the microcomputer drying system that can control the drying parameters such as air temperature, relative humidity and a weight-loss of water. The physico-chemical properties of dried products were measured in order to investigate the drying characteristics. The mechanism of water movement during air drying of Lentinus edodes closely followed the Page model. That was $M-M_c/M_0-M_c\;=\;\exp\;(-0.275t^{1.154})$ at $50^{\circ}C$ and 20% RH. The free amino acids increased with increased relative humidity. The color and browning degree increased with increased air temperature and relative humidity. The rehydration rate was low when the air temperature and relative humidity were high.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.941-944
• /
• 2012

Microprocessor is widely used in various industries. So it is very important to learn about it. But it is very difficult because students must know about both hardware and software of it. Student usually learn about it with a complete educational product in many technical high school. It make them to have no chance to mixed various electronic parts such as sensors, motors and so on. It cause them to low the creative product making ability. So we adjust new course with the arduino instead of the complete educational product to microprocessor education. It help student to high the electronic part mixing ability and the creative electronic product making ability.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.269-270
• /
• 2012

이 논문에서는 Fly-Back-Converter로 Interleaving 동작하는 계통연계형 마이크로 인버터를 연구하고 200W급 태양전지 모듈에서 발생되는 전기에너지를 효율적으로 이용하여 계통에 연계하기 위한 전력변환시스템 개발을 목표로 하고 있다. 저렴하면서 효율이 높은 계통연계 인버터를 실현하기 위해서는 기존의 중앙집중식 인버터 구조와 다른 접근이 필요하다. 따라서 영전위 소프트 스위칭이 가능한 2병렬 인터리빙 구동의 Fly-Back DC/DC 컨버터 토폴로지로 입력 단 회로를 구성하여 모든 전력변환 동작이 일어나도록 한다. 출력전류를 사인파 open loop로 제어를 하고 CRM(Critical Conduction Mode) 스위칭 동작으로 높은 효율로 작동을 실현시켰다. 이 논문에서는 인터리빙으로 동작하였을 시 200W급 출력으로 나올 수 있는 전류 최대치를 계산 하였고 출력 전류가 사인파로 동작하게 제어방법을 기재하였다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.174-176
• /
• 2019

최근 미세먼지(PM10 또는 PM2.5)로 인한 인체 유해성 및 실제 피해사례가 인터넷, TV 매체 등에 의해 화두가 됨에 따라 각종 제조, 사업장 및 발전소에서는 미세먼지 배출기준을 충족하기 위한 고효율 집진 기술이 필요로 되고 있는 상황이다. 고압 코로나 방전에 의해 미세먼지를 포집하는 고전압 하전방식 집진장치의 경우 전류를 광범위로 조절 가능하며 역전리 방지에 탁월하여 고효율의 집진이 가능하다. 본 논문에서는 기존의 다전원(펄스전원, 기본전원)을 이용한 마이크로 펄스 하전방식이 아닌 공진형 컨버터와 고압 트랜스포머, 배전압 회로를 적용한 고전압 단전원 제어 하전방식 및 이를 이용한 고전압 전압원의 저속 스위칭 제어기법을 제안하고, 실제 측정을 통해 제안 방식의 실효성을 검증하였다.