• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1663-1666
• /
• 2007

The finite element method is applied to analyze the deformation mechanisms in the closed-cell Al foam under the compression. The modeling of the real cellular structure proceeds with the concept of the reverse engineering. First of all, the small, $10{\times}\;10{\times}\;10mm^3$ sized specimens of the closed-cell Al foam are prepared. The micro focus X-ray CTsystem of SHIMADZU Corp. is used to scan the full structures of the specimens. The scanned structures are converted to the geometric surfaces and solids through the software for 3-D scan data processing, RapidFormTMof INUS Tech. Inc. Then the solid meshes are directly generated on the converted geometric solids for the finite element analysis. The large elastic-plastic deformation and 3-D contact problems for the Al cellular material are considered. The clear and successful analysis for the deformation mechanisms in the closed-cell Al foam is carried out through the comparison of the numerical results in this research with the referred experimental ones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.1-9
• /
• 2000

This paper presents the error performance of 16 star-QAM with diversity reception in microcell systems in the presence of additive white Gaussian noise(AWGN) and cochannel interference. The differential detection of 16 star-QAM is split into phase detection and amplitude detection. This technique can reduce the degradation of error performance which is due to fading and the complexity of receiver. Diversity reception is proposed to improve the degradation of error performance due to fading. Equal gain and maximal ratio combinings were adopted for the phase detection and the amplitude detection, respectively. The performance of 16 star-QAM was evaluated for various of Rician factor K, maximum Doppler frequency f_DT, signal to cochannel interference ratio and diversity branch L.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.211-218
• /
• 1998

In this paper, we analyze various errors in prediction results of ray tracing propagation model for microcellular environments. It is shown that improper electrical parameters of building materials and limitations of diffraction orders can cause high errors in prediction results. Especially, the effect of errors in building database on prediction results is considered in detail. It is also shown that the prediction error increases as the resolution of building map data is getting worse, and the error is analyzed depending on LOS and NLOS domains. Based on the results obtained by the analysis developed in this paper, 5 m resolution is suitable for the building map data if the maximum prediction error is required to be below 6 dB.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.79-87
• /
• 2010

It is widely accepted that the coverage with high user densities in mobile multimedia environments can only be achieved with small cell such as micro- and pico-cell. If handover events occur during the transmission of multimedia, the efficient resource reservation and handover methods are necessary in order to maintain the same QoS of transmitted multimedia traffic because the QoS may be defected by some delay and information loss. In this paper, we propose a resource allocation method in the next generation mobile communication systems, in which the resource allocation process has a tight relation with call admission, call load, and packet scheduling. The simulation results show that our proposed method provides a excellent performance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.7
• /
• pp.9-17
• /
• 2000

Determining the position and velocity of mobiles is an important issue for efficient handoff and channel allocation in microcell structure. Our early work proposes a technique for estimating the mobile location in the microcellular architecture. This process is based on the three step position estimation which determines the mobile position by gradually reducing the area of the mobile position. Using three step method, the estimator first estimates the locating sector in the sector estimation step, then estimates the locating zone in the zone estimation step, and then finally estimates the locating block in the block estimate step. But this scheme is prone to errors when the mobile is located in the boundary of sectors or tracks. In this paper we propose the enhanced scheme to reduce the estimation error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1A
• /
• pp.7-16
• /
• 2003

Handover is very important to support the mobility of user because wireless ATM networks have smaller cell size such as micro/pico cell for broadband mobile multimedia service In this paper, we propose dynamic path reservation handover scheme for fast inter-MSC (Mobile Switching Center) handovers To reduce the handover delay for connection re-routing, the proposed scheme reserves virtual channels from nearest common node to neighbor MSC in advance Especially, our handover scheme predicts the number of inter-MSC handover calls at each period by the prediction algorithm and reserve virtual channels The simulation and analysis results show that our scheme reduce handover complexity and has higher reservation channel utilization, compared with DVCT scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.113-120
• /
• 2006

This thesis deals with solutions such as coverage area extension, reduction of the shadow region and performance enhancement of handover caused by structural modification of WiBro network. The More far the distance of RAS(Radio Access Station) and SS(Subscriber Station) is in micro cell, the more bad the quality of channel environment becomes owing to radio interference. Consequently, it causes the deterioration of the throughput and also the deterioration of communication quality in many sides. In fact, most users of WiBro are located in the region, the QPSK region which is bad in point of channel quality. It brings the service complaint by user. We select RS(relay station) to solve the matter caused by channel environment in this cell, and extend coverage and improve the performance of handover call blocking.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.63-69
• /
• 2017

This paper presents a highly efficient power management system for UAV-drones. For free from the battery cell-balancing issue, the proposed system allows the drone to utilize a single-cell Li-Po battery. To realize low-voltage input of 3.7V, the switch-mode step-up DC-DC converter is optimally designed with high power efficiency. The prototype DC-DC converter was implemented with an output voltage of 5V, which will be provided to digital parts of the drone. The power efficiency was measured to be max. 91.3% with low surface temperature. The measured line and load regulations were 0.02V/V and 0.15V/A, respectively. Thanks to the proposed power management system, the available time-to-fly of the drone is expected to be significantly extended in virtue of the enhanced power efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2153-2164
• /
• 1998

This paper has presented the parameters for the coexistence between two systems in macro/microcell ovelaid W-CDMA WLL (wideband CDMA wireless local loop) and has calculated the capacity of forward/reverse link in microcell. To produce the capacity for analyzing system interference effects, we have shown tables and graphs with the parameters sucyh as RF channel bandwidth of WLL(W), the transmission rate of service message(R), the required signal power to noise power ratio( $E_{b/}$ $N_{0}$) for achieving accepatable error rate, te user number ( $N_{W1}$, $N_{W2}$) of the neighboring system, the signal power to interference power ratio(.GAMMA.$_{C1B}$, .GAMMA.$_{C2B}$) of the neighboring system, the normalized distance(d) between microcell and macrocell base-station, and microcell to macrocell radius ratio ( $R_{d}$). From the results, we have convinced that the capacity of microcell diminishes as increasing the user number ( $N_{W2}$) in macrocell, increasing the microcell radius, and decreasing the normalized distance(d) between microcell and macrocell base-station. Especially, we have known that when $R_{d}$=0.1, $N_{W2}$ must be below 24 at .GAMMA.$_{C2B}$ = 0 dB and below 8 at .GAMMA.$_{C2B}$ = 4 dB for the acceptable capacity raito to be over 80%. Therfore, this paper is usefult to design microcell W-CDMA WLL for accommodating more user number under the interference effects of macrocell W-CDMA WLL and is expected to be reference in power control if base-station.ation.ion.ation.ation.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.1-10
• /
• 2006

It is widely accepted that the coverage with high user densities can only be achieved with small cell such as micro- and pico-cell. The smaller cell size causes frequent handovers between cells and a decrease in the permissible handover Processing delay. This may result in the handover failure. in addition to the loss of some Packets during the handover. In these cases. re-transmission is needed in order to compensate errors, which triggers a rapid degradation of throughput. In this paper, we propose a new handover scheme in the next generation mobile communication systems, in which the handover setup process is done in advance before a handover request by predicting the handover cell based on mobile terminal's current position and moving direction. Simulation is focused on the handover failure rate and Packet loss rate. The simulation results show that our proposed method provides a better performance than the conventional method.