• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.26-30
• /
• 2005

Stamper surface temperature is very critical in replicating the high density optical disc substrates using injection molding as the pit or land/groove patterns on the optical disc substrate have decreased due to the rapid increase of areal density. During the filling stage, the polymer melt in the vicinity of the stamper surfaces rapidly solidifies and the solidified layer generated during polymer filling greatly deteriorates transcribability and fluidity of polymer melt. To improve transcribability and fluidity of polymer melt, stamper surface temperature should be controlled such that the growth of the solidified layer is delayed during the filling stage. In this study, the effect of heating on replication process was simulated numerically. Then, an injection mold equipped with instant active heating system was designed and constructed to raise the stamper surface temperature over the glass transition temperature during filling stage of the injection molding. Also, the closed loop controller using the Kalman filter and the linear quadratic Gaussian regulator was designed. As a result, the stamper surface temperature was controlled according to the desired reference stamper surface temperature.

• 정보저장시스템학회논문집
• /
• 제2권2호
• /
• pp.100-104
• /
• 2006

Stamper surface temperature is very critical in replicating the high density optical disc substrates using injection molding as the pit or land/groove patterns on the optical disc substrate have decreased due to the rapid increase of areal density. During the filling stage, the polymer melt in the vicinity of the stamper surfaces rapidly solidifies and the solidified layer generated during polymer filling greatly deteriorates transcribability and fluidity of polymer melt. To improve transcribability and fluidity of polymer melt, stamper surface temperature should be controlled such that the growth of the solidified layer is delayed during the filling stage. In this study, the effect of heating on replication process was simulated numerically. Then, an injection mold equipped with instant active heating system was designed and constructed to raise the stamper surface temperature over the glass transition temperature during filling stage of the injection molding. Also, the closed loop controller using the Kalman filter and the linear quadratic Gaussian regulator was designed. As a result. the stamper surface temperature was controlled according to the desired reference stamper surface temperature.

• 센서학회지
• /
• 제11권6호
• /
• pp.350-357
• /
• 2002

센서의 안정도와 감도를 개선시킬 수 있는 단일전극을 가진 열선형 마이크로 가스센서를 제작하였다. 일반적으로, 금속산화물 반도체를 이용한 가스센서는 히터전극과 감지전극의 두 개의 전극을 가지고 있다. 제작된 센서는 히터전극위에 감지물질을 형성하여 단일 전극을 가지는 구조를 가지고 있다. 히터와 감지전극으로 사용되는 Pt는 glass 기판위에 스퍼터링법으로 형성하였으며 $SnO_2$ 감지물질은 제작된 Pt 전극위에 열증착시켜 형성하였다. $SnO_2$ 막은 lift-off 공정을 이용해서 패턴을 형성하고 1시간 동안 산소분위기에서 열산화하였다. 제작된 소자의 크기는 $1.9{\times}2.1\;mm^2$이다. CO 가스에 대한 감지특성을 조사한 결과 1,000 ppm에 대해 100 mV의 출력변화를 나타내었으며, 넓은 농도범위($0{\sim}10,000\;ppm$)에서 선형적인 전압출력을 나타내었다. 또한 가스 반응 전과 반응 후의 전압출력을 비교해 볼 때, 1% 이내의 편차를 나타내는 우수한 회복성을 나타내었다.

• 대한기계학회논문집B
• /
• 제34권6호
• /
• pp.599-606
• /
• 2010

본 연구에서는 다양한 작동조건(인가전압, 주파수)에 대하여 박막의 두께와 챔버의 직경이 열공압형 마이크로펌프의 액추에이터 박막의 거동 특성에 미치는 영향을 실험적으로 파악하기 위해 다양한 박막 두께와 챔버직경의 액추에이터를 제작하였다. 액추에이터는 파이렉스 표면에 위치한 마이크로히터, 챔버, 그리고 박막으로 구성된다. 모든 인가전압에 대하여 주파수가 10 Hz 이하로 감소함에 따라 박막 중앙의 최대 변위는 박막의 두께와 챔버의 직경에 관계없이 크게 증가한다. 낮은 주파수 영역에서 챔버로 공급되는 열량이 증가함에 따라 박막 중앙의 변위는 박막의 두께가 얇을수록, 챔버의 직경이 작을수록 증가한다. 10 Hz 이상의 주파수 영역에서 박막 두께, 챔버 직경, 공급 열량과 같은 모든 설계 변수가 박막 중앙의 변위에 미치는 영향은 미미하다.

• 반도체디스플레이기술학회지
• /
• 제2권4호
• /
• pp.37-40
• /
• 2003

반도체 장비의 기능성과 신뢰성을 높이기 위하여 부품의 제조기술은 점차 마이크로 머신 기술을 요구하고 있다. 마이크로머신 기술 중 hot junction이 위치하는 멤브레인 구조는 각종 센서와 히터의 미세부품에서 가장 이용도가 큰 구조이다. 실험에서는 마이크로머신의 기본 구조인 멤브레인 형태를 만들기 위해 KOH 용액과 TMAH 용액으로 단결정 실리콘을 이방성 습식식각 하였다. 실험결과, 식각액의 온도와 농도, 마스크 패턴과 웨이퍼의 결정성의 일치 등을 고려해야 하며, 식각 속도는 KOH 농도 및 온도에 따라 크게 변함을 알 수 있었다. KOH 용액은 30 wt% 80~$90^{\circ}C$ 온도 범위에서 가장 좋은 특성을 나타냈다. 한편, TMAH용액이 실리콘을 식각하는 용액으로 관심을 끄는 것은 단결정에서 상대적으로 $SiO_2$ 박막을 마스크로 사용할 수 있을 뿐 아니라 $SiO_2$ 박막을 마스크로 사용할 수 있을 뿐 아니라 다른 식각액보다 찌꺼기가 적다는 장점 때문이다. 그러나, 다른 용액에 비해 가격이 고가이며 식각 속도가 낮다는 것이 실용적인 측면에서 큰 단점이다. 실험결과를 종합적으로 고려할 때 KOH 용액 농도 30wt%와 온도 $90^{\circ}C$가 마이크로머신 기술에 의한 멤브레인 구조 제작에서 적합한 공정조건이라고 할 수 있다.

• 대한기계학회논문집B
• /
• 제30권2호
• /
• pp.153-160
• /
• 2006

A technique for measuring surface temperature field in micro scale is newly proposed, which uses temperature-sensitive fluorescent (TSF) dye coated on the surface and is easily implemented with a fluorescence microscope and a CCD camera. The TSF dye is chosen among mixtures of various chemical compositions including rhodamine B as the fluorescent dye to be most sensitive to temperature change. In order to examine the effectiveness of this temperature measurement technique, numerical analysis and experiment on transient conduction heat transfer for two different substrate materials, i. e., silicon and glass, are performed. In the experiment, to accurately measure the temperature with high resolution temperature calibration curves were obtained with very fine spatial units. The experimental results agree qualitatively well with the numerical data in the silicon and glass substrate cases so that the present temperature measurement method proves to be quite reliable. In addition, it is noteworthy that the glass substrate is more appropriate to be used as thermally-insulating locally-heating heater in micro thermal devices. This fact is identified in the temperature measuring experiment on the locally-heating heaters made on the wafer of silicon and glass substrates. Accordingly, this technique is capable of accurate and non-intrusive high-resolution measurement of temperature field in microscale.

• 대한기계학회논문집B
• /
• 제30권7호
• /
• pp.646-655
• /
• 2006

The present research is an experimental study on characteristics of cooling behavior for the adjacent copper blocks with surface roughness or micro-porous coated surface. The experiments were carried out at saturation state or within subcooled states of PF5060. The effects of heater orientation and the intervals between heating surfaces or substrates were investigated under various heat flux conditions. The boiling performance of copper block with micro-porous coated surface was better than that of copper block with surface roughness. It is understood that the bubble sweeping enhances boiling performance for the heaters with inclinations of $\theta=45^{\circ}\;and\;\theta=90^{\circ}$, where as the bubble flattening decreases boiling performance for the heaters with inclinations of $\theta=135^{\circ}\;and\;\theta=180^{\circ}$. In comparison to upper heater and below heater with orientation, the upper heater has lower superheat temperature than the below heater due to the bubble sweeping. It is also found that boiling performance decreases in the case of adjacent double heaters with only 0.2cm substrate interval.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권11호
• /
• pp.544-547
• /
• 2006

In this paper, we present a temperature-controlled system for MEMS electrical resistance heaters without a temperature sensor. To rapidly control the heater temperature, the microheater system developed consists of a power supply, power amplifier, digital ${\underline{P}}roportional-{\underline{I}}ntegral-{\underline{D}}ifferential$ (PID) controller, and a quarter bridge circuit with the microheater and three resistors are nominally balanced. The microheaters are calibrated inside a convection oven to obtain the temperature coefficient with a linear or quadratic fit. A voltage amplifier applies the supply voltage proportional to the control signal from the PID controller. Small changes in heater resistance generate a finite voltage across the quarter bridge circuit, which is fed back to the PID controller to compare with the set-point and to generate the control signal. Two MEMS microheaters are used for evaluating the developed control system - a NiCr serpentine microheater for a preconcentrator and a Nickel microheater for ${\underline{P}}olymerase\;{\underline{C}}hain\;{\underline{R}}eaction$ (PCR) chip.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1186-1190
• /
• 2003

In this paper, a valveless bubble-actuated fluid micropump was has been developed and its performance was tested. The valveless micropump consists of the lower plate, the middle plate, the upper plate and a resistive heater. The lower plate includes the nozzle-diffuser elements and the double-chamber. Nozzle-diffuser elements and a double-chamber are fabricated on the silicon wafer by the DRIE(Deep Reactive Ion Etching) process. The lower plate also has inlet/outlet channels for fluid flow. The middle plate is made of glass and plays the role of the diaphragm. The chamber in the upper plate is filled with deionized water, and which contacts with the resistive heater. The resistive heater is patterned on a silicon substrate by Ti/Pt sputtering. Three plates and the resister heater are laminated by the aligner and bonded in the anodic bonder. Since the bubble is evaporated and condensed periodically in the chamber, the fluid flows from inlet to outlet with respect to the diffusion effect. In order to avoid backflow, the double chamber system is introduced. Analytical and experimental results show the validity of the developed double-chamber micropump.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.69-76
• /
• 2019

Microheaters with different structures were fabricated and compared to find an optimal configuration enhancing the performances of $C_2H_2$ gas sensor. Three temperature sensors were integrated on the surface of the insulation layer over the microheater, and resistance changes were observed to check the generated heat from the microheater. A low operating voltage of 1mV was applied to the temperature sensor to minimize any influence of thermal heat from the resistance type temperature sensor, whereas high voltages in the range between 10 and 20V were applied to the microheater. A microheater structure generating maximum heat at low voltage was determined. The generated heat was verified by the temperature sensors on the top of the $Si_3N_4$ and infrared camera. A long term stability and accuracy of the microheater were observed. The developed microheater was applied to enhance the performances of $C_2H_2$ gas sensor and successfully confirmed that the developed microheater greatly contributes to the improvement of sensitivity and selectivity of gas sensor.