• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.244-245
• /
• 2010

최근 광전자 분야에서는 미래 에너지 자원에 대한 관심과 함께 GaN 기반 발광다이오드 및 태양전지 연구가 활발히 진행되고 있다. GaN는 높은 전자 이동도와 높은 포화 속도 등의 광전자 소자에 유리한 특성을 가지고 있으나, 고 인듐 함유량과 막질의 우수한 특성을 동시에 구현하는 것은 매우 어렵다. 이를 극복하기 위한 방법으로써 선택 영역 박막 성장법(Selective Area Growth)은 마스크 패터닝을 통해 제한된 영역에서만 박막을 성장하는 방법으로써 GaN의 막질을 향상 시킬 수 있는 방법으로 주목받고 있다. 본 논문에서는 대면적 기판에서 GaN의 막질 향상뿐만 아니라 고인듐 InGaN 박막 성장을 위하여 서브마이크로미터 주기와 크기를 갖는 홀 패턴을 포토리소그라피 공정 최적화를 통해 구현할 수 있는 방법에 대해 논의한다. 그림. 1은 사파이어 기판 위에 선택 영역 박막 성장법을 이용하여 성장한 n-GaN/활성층/p-GaN의 구조를 나타낸 그림이다. 이를 통하여 서브마이크로미터 스케일의 반극성 InGaN면 위에 높은 인듐 함유량을 가지면서도 우수한 특성을 갖는 박막을 얻을 수 있다. 본 실험을 위하여 사파이어 기판 위에 SiO2를 증착한 후 포토레지스트(AZ5206)을 도포하고 포토리소그라피 공정을 진행하여 2um 크기 및 간격을 갖는 패턴을 형성했다. 그림. 2는 AZ5206에 UV를 조사(5초)하고 현상(23초)한 패턴을 윗면(그림. 2(a))과 $45^{\circ}$ 기울인 면(그림. 2(b)) 에서 본 SEM(Scanning Electron Microscope) 사진이다. 이를 통해 약 2.2um의 홀 패턴이 선명하게 형성 됨을 볼 수 있다. 그 후 수백나노 직경의 홀을 만들기 위해서 리플로우 공정을 수행한다. 그림. 3은 리플로우 온도에 따른 패턴의 홀 모양을 AFM(Atomic Force Microscope)을 이용하여 측정한 표면의 사진이다. 이를 통해 2차원 평면에서 리플로우 온도 및 시간에 따른 변화를 볼 수 있다. 그림.3의 (a)는 리플로우 공정을 진행하기 전 패턴이고, (b)는 $150^{\circ}C$에서 2분, (c)는 $160^{\circ}C$에서 2분 (d)는 $170^{\circ}C$에서 2분 동안 리플로우 공정을 진행한 패턴이다. $150^{\circ}C$와 $160^{\circ}C$에서는 직경에 큰 변화가 없었고, $160^{\circ}C$에서는 시료별 현상 시간 오차에 따라 홀의 크기가 커지는 경향이 나타났다. 그러나 $170^{\circ}C$에서 2분간 리플로우 한 시료 (그림. 3(d))의 경우는 홀의 직경이 ~970nm 정도로 줄어든 것을 볼 수 있다. 홀의 크기를 보다 명확히 표현하기 위해 그림.3에 대응시켜 단면을 스캔한 그래프가 그림.4에 나타나 있다. 그림.4의 (a) 및 (b)의 경우 포토레지스트의 높이 및 간격이 일정하므로, 리플로우에 의한 영향은 거의 없었다. 그림. 4(c)의 경우 포토레지스트의 높이가 그림.4(a)에 비해 ~25nm 정도 낮은 것으로 볼 때, 과도 현상 및 약간의 리플로우가 나타났을 가능성이 크다. 그림. 4(d)에서는 ~970nm의 홀 크기가 나타나서 본 연구에서 목표로 하는 나노 홀 크기에 가장 가까워짐을 확인할 수 있었다. 따라서, $170^{\circ}C$ 이상의 온도와 2분 이상의 리플로우 시간 조건에서 선택 영역 성장을 위한 나노 홀 마스크의 크기를 제어할 수 있음을 확인하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.3
• /
• pp.43-49
• /
• 2007

Thickness of intermetallic compounds and consumption rates of under bump metallurgies (UBMs) were investigated in wafer-level solder bumping with variations of UBM materials and reflow times. In the case of Cu UBM, $0.6\;{\mu}m-thick$ intermetallic compound layer was formed before reflow of Sn solder, and the average thickness of the intermetallic compound layer increased to $4\;{\mu}m$ by reflowing at $250^{\circ}C$ for 450 sec. On the contrary, the intermetallic layer had a thickness of $0.2\;{\mu}m$ on Ni UBM before reflow and it grew to $1.7\;{\mu}m$ thickness with reflowing for 450 sec. While the consumption rates of Cu UBM were 100nm/sec fur 15-sec reflow and 4.50-sec for 450-sec reflow, those of Ni UBM decreased to 28.7 nm/sec for 15-sec reflow and 1.82 nm/sec for 450-sec reflow.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.4
• /
• pp.1-9
• /
• 2002

The metallurgical reaction properties between the pad consisted of 0.5 $\mu\textrm{m}$Au/5 $\mu\textrm{m}$Ni/Cu layers on a conventional ball grid array (BGA) substrate and In-15 (wt.%)Pb-5Ag solder ball were characterized during the reflow process and solid aging. During the reflow process of 1 to 5 minutes, it was observed that thin $AuIn_2$ or Ni-In intermetallic layer was formed at the interface of solder/pad. The dissolution rate of the Au layer into the molten solder was about $2\times 10^{-3}$ $\mu\textrm{m}$/sec which is remarkably low in comparison with a eutectic Sn-37Pb solder. After solid aging treatment for 500 hrs at $130^{\circ}C$, the thickness of $Ni_{28}In_{72}$ intermetallic layer was increased to about 3 $\mu\textrm{m}$ in all the conditions nevertheless the initial reflow time was different. These result show that In atoms in the solder alloy were diffused through the $AuIn_2$ phase to react with underlaying Ni layer during solid aging treatment. From the microstructural observation and shear tests, the reaction properties between In-15Pb-5Ag alloy and Au/Ni surface finish were analyzed not to trigger Au-embrittlement in the solder joints unlike Sn-37Pb composition.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.289-299
• /
• 2005

The ball shear force was investigated in terms of test parameters, i.e. displacement rate and probe height, with an experimental and non-linear finite element analysis for evaluation of the solder joint integrity in area array packages. The increase in the displacement rate and the decrease in the probe height led to the increase in the shear force. Excessive probe height could cause some detrimental effects on the test results such as unexpected high standard deviation and probe sliding from the solder ball surface. The low shear height conditions were favorable for assessing the mechanical integrity of the solder joints. The mechanical and electrical properties of the Sn-37Pb/Cu and Sn-3.5Ag/Cu BGA solder joints were also investigated with the number of reflows. The total thickness of the intermetallic compound (IMC) layers, consisting of Cu6Sn5 and Cu3Sn, was increased as a function of cubic root of reflow time. The shear force was increased up to 3 or 4 reflows, and then was decreased with the number of reflows. The fracture occurred along the bulk solder, in irrespective of the number of reflows. The electrical resistivity was increased with increasing the number of reflows.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.65-70
• /
• 2021

In this study, interfacial properties and mechanical properties of joints were reported after Cu pads finished with organic solderability preservative (OSP) on flame retardant-4 (FR-4) printed circuit board (PCB) and electronic components were joined with a Sn-57Bi-1Ag solder paste by using a laser bonding process. The laser bonding process was performed under various bonding conditions with changing a laser power and a bonding time and effects of bonding conditions on interfacial and mechanical properties of joints were analyzed. In order to apply for industry, properties of bonding joints using a reflow bonding process which are widely used were compared. When the laser bonding process were performed, we observed that Cu₆Sn₅ intermetallic compounds (IMCs) were fully formed at the interface although the bonding times were very short about 2 and 3 s. Furthermore, void formations of the joints by using the laser bonding process were suppressed at the joints with comparing to the reflow bonding process and shear strengths of bonding joints were higher than that by using the reflow bonding process. Therefore, in spite of a very short bonding time, it is expected that joints will be stably formed and have a high mechanical strength by using the laser bonding process.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.134-141
• /
• 2013

Reflow soldering process is essential in electronic package. Reflow process for a long time results from the decrease of reliability because IMC is formed excessively. Solder alloys of Sn-37Pb and Sn-Ag with different kinds of Cu contents (0, 0.5 and 1 wt.%) as compared with Ni and Cu plate joints are investigated according to varying reflow time. The interfaces of solder joints are observed to analyze IMC (intermetallic compound) growth rate by scanning electron microscope (SEM). Shear test is also performed by using SP (Share-Punch) tester. The test results are compared with the solder joints of two different plates (Ni and Cu plate). $Cu_6Sn_5$ IMCs are formed on Cu plate interfaces after reflows in all samples. Ni3Sn4 and $(Cu,Ni)_6Sn_5$ IMCs are also formed on Ni plate interfaces. The IMC layer forms are affected by reflow time and contents of solder alloy. These results show that mechanical strength of solder joints strongly depends on thickness and shape of IMC.

• Korean Journal of Materials Research
• /
• v.6 no.11
• /
• pp.1146-1152
• /
• 1996

실제 사용시 신뢰성을 보장하기 위하여, 고온에서 장시간 동안의 시효로 인한 ACA COG(Anisotropic Conductive Chip On Glass) 접합 특성의 변화가 연구되었다. 모든 접합 시편들은 16$0^{\circ}C$에서 156시간 동안 유지되었고 시효하는 동안의 접촉저항의 변화는 감소하였다. 특히, 156시간이후, 4000개 /$\textrm{mm}^2$의 입자밀도를 가진 ACA에서는 접촉저항의 벼노하가 나타나지 않았다. 입자크기의 경우 작은 입자를 가진 ACA는 16$0^{\circ}C$에서 시효후에도 접촉저항의 변화를 보이지 않았다. 또한 4000개/$\textrm{mm}^2$ 및 5$\mu\textrm{m}$ 입자를 가진 ACA를 사용한 시편은 접합상태가 안정하였기 때문에 16$0^{\circ}C$에서도 경화수지의 팽창 및 리플로우(reflow)에 의한 영향을 받지 않았다. 따라서 이 ACA에서는 16$0^{\circ}C$에서 156시간 동안 시효한 후에도 오픈(open)이 나타나지 않았다.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.9-17
• /
• 2008

Cu mushroom bumps were formed by electrodeposition and flip-chip bonded to Sn substrate pads. Contact resistances of the Cu-mushroom-bump joints were measured and compared with those of the Sn-planar-bump joints. The Cu-mushroom-bump joints, processed at bonding stresses ranging from 19.1 to 95.2 MPa, exhibited contact resistances near $15m\Omega$/bump. Superior contact-resistance characteristics to those of the Sn-planar-bump joints were obtained with the Cu-mushroom-bump joints. Contact resistance of the Cu-mushroom-bump joints was not dependent upon the thickness of the as-elecroplated Sn-capcoating layer ranging from $1{\mu}m$ to $4{\mu}m$. When the Sn-cap-coating layer was reflowed, however, the contact resistance was greatly affected by the thickness and the reflow time of the Sn-cap-coating layer.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.301-306
• /
• 2005

Aging characteristics of newly developed Sn-1.8Bi-0.7Cu-0.6In solder was evaluated by shear strength and microstructure. Stencil printing was applied to form solder. The shear strength of Sn-1.8Bi-0.7Cu-0.6In at $150^{\circ}C$ showed the highest values through aging. Intermetallic compounds formed on the interface between solder and Au/Cu/Ni/Al UBM were $(Cu,\;Ni)_6Sn_5$ Furthermore, it was found that Spatting of Intermetallic compounds started before 500h aging at $150^{\circ}C$.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.36-38
• /
• 2006

We investigated that the metallurgical, mechanical and electrical properties of the Sn-3.SAg/Cu ball grid array (BGA) solder joints at a reflow temperature of $255^{\circ}C$ for different reflow times of 10, 60, 300 and 1800 s. Two different intermetallic compound (IMC) layers, consisting of scallop-shaped $Cu_6Sn_5$ and very thin $Cu_3Sn$, formed at the solder/substrate interface, and their thicknesses increased with increasing reflow time. The shear force peaked after reflow for 60 s, and then significantly decreased with increasing reflow time. The fracture occurred along the solder ball in the initial reflow, but the fraction of the brittle fracture increased with increasing reflow time. The IMC growth and the volume of Cu dissolved in the solder balls affected the electrical property.