• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.225-234
• /
• 2021

The purpose of this paper is to examine commercialization model of appropriate technology through the case of the Lao-Korea Science and Technology Center (LKSTC). LKSTC has developed washing, water treatment, and sterilization technology in the agrifood sector and three types of pico-hydro generator, Pico-solar hybrid system, and energy remote monitoring technology in the renewable energy sector. Commercialization of appropriate technology was successfully carried out through the establishment of Kaipan community business, school enterprises, and social enterprise. The policy implications are as follows. First, the commercialization of appropriate technology in developing countries should enhance the linkage with the regional development policies of the recipient countries. Second, in order to minimize market risk, innovative technology development and local startup networks should be properly established. Finally, the mid and long term efforts are needed to increase the sustainability of the business.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.403-413
• /
• 2015

This paper presents the cutter bit damage due to the rotation speed of shield TBM cutter head in the mixed ground. The efficient of cutter bits and disk cutter are very important for tunnelling in mixed ground. In particular, this research is focused on the performance of cutter bits during excavation in mixed ground which is consist of the weathered soil and rock formation. In order to carry out this research, the experimental works are prepared performed by using the scaled shield TBM cutter bits evaluation machine developed. The mixed ground is prepared considering with a scale effect of tunnel size. Three different rotation speeds of shield TBM cutter head (i.e. 2, 3, 4 rpm) are applied in the experimental work. The drag forces acting on the cutter bits are measured at each cutter bit during rotation of cutter head. It is also analysed the variation of drag forces due to the rotation speed of shield TBM cutter head. The results of this research are clearly shown that the drag forces acting on the cutter bits are jumped up at the boundary between weathered soil and rock. It is also indicated that the jamping drag forces are increased with increasing the rotation speed of the cutter head. It is found from the research that the higher rotation speed of shield TBM cutter head will be high risk in the mixed ground. It is, therefore, suggested that the use of lower rotation speed of shield TBM cutter head is recommended for reducing the cutter bit damage in practice.

• Journal of Environmental Impact Assessment
• /
• v.25 no.4
• /
• pp.296-306
• /
• 2016

There is a growing interest in establishing a regional climate change adaptation policy as the climate change impact in the region and local scale increases. This study focused on the analysis of 32 regions on its characteristics of local climate change adaptation plans. First, statistic program R was used for conducting cluster analysis based on the frequency and budgets of adaptation plan. Further, we analyzed damage frequency from newspapers regarding climate change impacts in eight categories which were caused by extreme weather events on 2,565 cases for 24 years. Lastly, the characteristics of climate change adaptation plan was compared with damage frequency patterns for evaluating the adequacy of climate change adaptation plan on each cluster. Four different clusters were created by cluster analysis. Most clusters clearly have their own characteristics on certain sectors. There was a high frequency of damage in 'disaster' and 'health' sectors. Climate change adaptation plan and budget also invested a lot on those sectors. However, when comparing the relative rate among regional governments, there was a difference between types of damage and climate change adaptation plan. We assumed that the difference could come from that each region established their adaptation plans based on not only the frequency of damage, but vulnerability assessment, and expert opinions as well. The result of study could contribute to policy making of climate change adaptation plan.

• Spatial Information Research
• /
• v.23 no.2
• /
• pp.11-20
• /
• 2015

Abstract Monitoring is the most critical element in implementing "forest carbon offset project" to enhance the visibility of CSR (Corporate Social Responsibility) in North Korea. This study is intended to explore monitoring potential in terms of forest carbon offset project using satellite image for Baekdu mountain of North Korea. The permanent record of standard satellite remote sensing system demonstrated its capability of presenting area-wide visual evidences of monitoring conditions in Mt. Baekdu mountain of North Korea (site suitability, carbon stock by forest biomass growth, carbon emission by forest biomass loss, deforestation and degradation, environmental, social and economic impact specified in the Carbon Sequestration Law). It doesn't seem very difficult to comply with monitoring requirements for "the forest carbon offset project" due to the probative value of satellite data. Therefore, it could be considerable or realistic approach to utilize CSR based forest carbon offset project as a point of reform and open-door in North Korea. It is anticipated that this research output could be used as a valuable reference for Korea-based enterprises to ensure monitoring potentials using satellite image in exploring forest carbon offset project sites in North Korea.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.135-137
• /
• 2019

In recent years, the need for ship-to-ship has emerged around the world as the volume of tanker carriers increases. In the case of STS mooring, a safety review should be carried out on other standards since the characteristics are different from the mooring at a typical wharf. However, there is no separate standard about STS in Korea. Therefore, in this study, STS mooring simulation and sensitivity analysis were performed using OPTIMOOR program, a commercial numerical analysis program, to identify STS mooring characteristics. The target sea area is modeled at D2 anchorage of Yeosu Port in Korea, and modeling of the target ship is selected as the case of VLCC-VLCC. Based on this, we tried to establish the standard for STS mooring safety evaluation. Numerical simulation results show that the STS mooring changes depending on the ship load condition, weather condition(wave period and wave height), encounter angle and pre-tension of mooring line. In addition, a risk matrix was created to set the safe external force range in the sea area. It is expected that the mooring characteristics of the STS can be grasped by this result and contribute to the revision of the mooring safety assessment standard.

• Journal of Navigation and Port Research
• /
• v.46 no.1
• /
• pp.57-72
• /
• 2022

The recent increase in international trade volume and explosive increase in cargo volume due to the non-face-to-face society are leading to an increase in risk exposure and safety accidents in the port logistics industry. Consequently, as the atmosphere and consensus on safety are spreading throughout the society, various safety laws are being enacted by the industry. Nevertheless, according to the industrial accidents status analysis by the Ministry of Employment and Labor, the average annual number of injured persons increased by 11.1% and the number of deaths by 4.0% from 2015 to 2019. This means that special attention should be paid to possible future risks and preventive measures for major causes of accidents should be established. Therefore, in this study, risk assessment was conducted based on 5,028 accident cases that were reported by the Korea Occupational Safety and Health Agency for 5 years, from 2016 to 2020, and major risk factors for each industry were derived, and then bow-tie analysis was conducted to perform the risk assessment; Further, the study aimed to derive the causes and preventive measures from the risk factors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6A
• /
• pp.765-778
• /
• 2008

Performance Profiles are essential to predict the performance variation over time for the bridge management system (BMS) based on risk management. In general, condition profiles based on experts opinion and/or visual inspection records have been used widely because obtaining profiles based on real performance is not easy. However, those condition profiles usually don't give a good consistency to the safety of bridges, causing practical problems for the effective bridge management. The accuracy of performance evaluation is directly related to the accuracy of BMS. The reliability of the evaluation is important to produce the optimal solution for distributing maintenance budget reasonably. However, conventional methods of bridge assessment are not suitable for a more sophisticated decision making procedure. In this study, a method to compute quantitative performance profiles has been proposed to overcome the limitations of those conventional models. In Bridge Management Systems, the main role of performance profiles is to compute and predict the performance of bridges subject to lifetime activities with uncertainty. Therefore, the computation time for obtaining an optimal maintenance scenario is closely related to the efficiency of the performance profile. In this study, the Response Surface Method (RSM) based on independent and important design variables is developed for the rapid computation. Steel box bridges have been investigated because the number of independent design variables can be reduced significantly due to the high dependency between design variables.

• Information Systems Review
• /
• v.24 no.1
• /
• pp.105-123
• /
• 2022

Thanks to the remarkable success of Artificial Intelligence (A.I.) techniques, a new possibility for its application on the real-world problem has begun. One of the prominent applications is the bankruptcy prediction model as it is often used as a basic knowledge base for credit scoring models in the financial industry. As a result, there has been extensive research on how to improve the prediction accuracy of the model. However, despite its impressive performance, it is difficult to implement machine learning (ML)-based models due to its intrinsic trait of obscurity, especially when the field requires or values an explanation about the result obtained by the model. The financial domain is one of the areas where explanation matters to stakeholders such as domain experts and customers. In this paper, we propose a novel approach to incorporate financial domain knowledge into local rule generation to provide explanations for the bankruptcy prediction model at instance level. The result shows the proposed method successfully selects and classifies the extracted rules based on the feasibility and information they convey to the users.

• Journal of Korea Water Resources Association
• /
• v.53 no.8
• /
• pp.627-636
• /
• 2020

Debris flow disasters primarily occur in mountainous terrains far from cities. As such, they have been underestimated to cause relatively less damage compared with other natural disasters. However, owing to urbanization, several residential areas and major facilities have been built in mountainous regions, and the frequency of debris flow disasters is steadily increasing owing to the increase in rainfall with environmental and climate changes. Thus, the risk of debris flow is on the rise. However, only a few studies have explored the characteristics of flooding and reduction measures for debris flow in areas designated as steep slopes. In this regard, it is necessary to conduct research on securing independent disaster prevention technology, suitable for the environment in South Korea and reflective of the topographical characteristics thereof, and update and improve disaster prevention information. Accordingly, this study aimed to calculate the amount of debris flow, depending on disaster prevention performance targets for regions designated as steep slopes in South Korea, and develop an independent model to not only evaluate the impact of debris flow but also identify debris barriers that are optimal for mitigating damage. To validate the reliability of the two-dimensional debris flow model developed for the evaluation of debris barriers, the model's performance was compared with that of the hydraulic model. Furthermore, a 2-D debris model was constructed in consideration of the regional characteristics around the steep slopes to analyze the flow characteristics of the debris that directly reaches the damaged area. The flow characteristics of the debris delivered downstream were further analyzed, depending on the specifications (height) and installation locations of the debris barriers employed to reduce the damage. The experimental results showed that the reliability of the developed model is satisfactory; further, this study confirmed significant performance degradation of debris barriers in areas where the barriers were installed at a slope of 20° or more, which is the slope at which debris flows occur.

• Journal of Radiation Protection and Research
• /
• v.41 no.1
• /
• pp.15-29
• /
• 2016

Research background: Despite the visible growth in radiation usage and nuclear power development, the analysis of their relationship with fundamental rights, a subject of public concern regarding issues including the right to health, environmental rights, safety rights, the right to know, the right to development, and the right to life, is currently non-existent. Methods: By examining various fundamental rights in the context of positive laws regarding radiation and nuclear power in an idealistic perspective that guarantees the maximum degree of rights, this paper aims to propose legislative supplements that will lead to improvements in quality of life. Result and discussion: In the South Korean Constitution, radiation and nuclear power is a subject incorporating several rights, including at least 12 clauses that are directly related to fundamental rights; these constitutional rights are manifested in the various clauses of the 14 positive laws regarding radiation and nuclear power. The question on the relative importance of each fundamental right as reflected in these positive laws- whether the right to life should be prioritized or considered equal in weight to the right to health, environmental rights, the right to know, and safety rights- requires careful deliberation and is difficult to humanly resolve in the short term. Conclusion: Making policy that expands the usage of radiation and nuclear power while simultaneously preventing their associated risks is an important task for the Republic of Korea, and a proper value judgment is necessary to find a balance in its associated rights.