• Bulletin of the Society of Naval Architects of Korea
• /
• v.60 no.3
• /
• pp.24-31
• /
• 2023

• Bulletin of the Society of Naval Architects of Korea
• /
• v.60 no.4
• /
• pp.21-26
• /
• 2023

• Bulletin of the Society of Naval Architects of Korea
• /
• v.61 no.2
• /
• pp.27-33
• /
• 2024

• Bulletin of the Society of Naval Architects of Korea
• /
• v.61 no.4
• /
• pp.12-16
• /
• 2024

• Journal of Korean Society on Water Environment
• /
• v.18 no.4
• /
• pp.387-394
• /
• 2002

The efficiency variation of UF(tubular)/RO(spiral wound) process using acrylic wastewater treated by photo-catalyst pretreatment and coagulant-filter-neutralization pretreatment processes were discussed wit the variation of appled pressure and temperature. Ultrafiltration tubular module using acrylic wastewater treated by photo-catalyst pretreatment and coagulant-filter-neutralization pretreatment processes was shown that COD and T-N were not highly affected with the variation of appled pressure and temperature. It was shown that removal efficiency of COD and T-N was low. Removal efficiency of TDS and turbidity with ultrafiltration tubular module was better with the acrylic wastewater by photo-catalyst pretreatment than acrylic wastewater by coagulant-filter-neutralization pretreatment. T-N and TDS were shown high removal efficiency in reverse osmosis membrane process.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.59-68
• /
• 2013

In the present study, sea water reverse osmosis desalination system was composed with an ultra-filtration membrane as a pre-treatment. Sea water was induced into the pre-treatment composed with an auto-screen filter and an ultra-filtration membrane. It was proved that the permeate of the pre-treatment was adequate for reverse osmosis desalination system by measuring the $SDI_{15}$ and the turbidity. Feed salinities was changed by mixing the brine and the permeate. Inlet salinities effected the performances of sea water reverse osmosis desalination system in a large amount such as the salt rejection, the recovery ratio, the pressure, the product salinity. Energy consumptions per the ton of the product were almost linearly increased with the inlet salinities.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.304-307
• /
• 2008

Two-dimensional Stokes flow due to the line source and line sink of same strength in semi-infinite flow region with free surface is analysed using complex variable theory and conformal mapping. Surface tension effects are included while gravity is neglected. From the results of analysis, flow pattern and free surface shape are obtained and velocity distribution on the free surface is determined with 2 independent parameters Ca (capillary number) and h (non-dimensionalized distance between source and sink). When the location of the sink is above the source, velocity on the free surface converges and a cusp occurs on the free surface for the value of Ca above some critical capillary number.

• The Korean Journal of Zoology
• /
• v.33 no.2
• /
• pp.238-240
• /
• 1990

A gobjoid fish, Pierogobius zacalies is described from three spedmens colleded in Songjong-dong, Pusan-si, on February 10, 1989. This Is the first definItive record in Korean waters. This fish is disdnguished from the other species of the genus Pierogobius by the combinadon of the following charaders: lateral-line scales > 113, soft dorsal fin rays VIII, i-24-25, soft anal fin rays i-24-25, and 5 dark-brown vertical broad band on the body. "Dasotdonggal-- mang-dug is proposed as Korean name of this species.cies.

• Journal of the KSME
• /
• v.23 no.3
• /
• pp.200-206
• /
• 1983

FAM의 기본적인 구상은 해석 하고자하는 선형 또는 비선형 편미분 방정식을 국부적으로 해석 적인 해를 구하여 이용하자는 것이다. 그러기 위하여 유한차분법(FDM)과 유한변분법(FEM)에 서와 같이 전체유동장을 작은 요소로 나누고 그 요소 내에서 국부해를 구한 다음 이들 요소를 중첩시킴으로써 각 요소의 미지수에 대한 대수식을 얻어서 수치해를 구하자는 것이다. 그러나 FDM에서와 같이 국부요소에서 미분항을 구하지 않고, FEM 에서와 같이 요소에서 형상함수를 도입하지 않는 상태에서 해석적인 해를 구하고 있기 때문에 수치해석에서 얻어지는 미분양들은 비교적 정확하게 구해진다. 따라서 Navier-Stokes 방정식이나 에너지 방정식에서 최고차항이 작은 파라메타, 즉 레이놀즈수나 피크리수의 역수로 곱하여서 있는 경우에도 안정된 해를 구할 수 있다고 알려져 있다. 요소자체의 계수를 구하는 데는 계산시간이 많이 소요되지만 수치해석 상의 안정성이나 수렴성이 좋기 때문에 전체계산시간은 오히려 적게 걸리는 경우도 있다고 한다.

• Annual Conference of KIPS
• /
• 2007.11a
• /
• pp.779-781
• /
• 2007

Nowadays, as the increasing functionality and scales of embedded systems, system design grows more complex than before. So verification and simulation of systems become an important facet in hardware-software co-design issues. But it is almost impossible to simulate an embedded system without real hardware implementation or environment communication, especially for control-dominated reactive systems. Therefore, in this paper, we will introduce a GUI environment module generator for integrated Esterel\C++ simulation. By generating the GUI modeling environment, we can simulate and verify the whole embedded system conveniently.