The efficiency variation of UF(tubular)/RO(spiral wound) process using acrylic wastewater treated by different pretreatment processes

아크릴 폐수의 전처리공정에 따른 UF(tubular)/RO(spiral wound) 공정의 성능변화

  • Lee, Kwang-Hyun (Department of Chemical Engineering, Dongeui University) ;
  • Han, Sung-Bum (Department of Chemical Engineering, Dongeui University) ;
  • Choi, Dae-Woong (Department of Chemical Engineering, Dongeui University)
  • Published : 2002.12.31

Abstract

The efficiency variation of UF(tubular)/RO(spiral wound) process using acrylic wastewater treated by photo-catalyst pretreatment and coagulant-filter-neutralization pretreatment processes were discussed wit the variation of appled pressure and temperature. Ultrafiltration tubular module using acrylic wastewater treated by photo-catalyst pretreatment and coagulant-filter-neutralization pretreatment processes was shown that COD and T-N were not highly affected with the variation of appled pressure and temperature. It was shown that removal efficiency of COD and T-N was low. Removal efficiency of TDS and turbidity with ultrafiltration tubular module was better with the acrylic wastewater by photo-catalyst pretreatment than acrylic wastewater by coagulant-filter-neutralization pretreatment. T-N and TDS were shown high removal efficiency in reverse osmosis membrane process.

본 연구는 $TiO_2$ 광촉매 및 응집-여과-중화공정을 거친 아크릴폐수를 UF(tubular)/RO(spiral wound)공정에 적용하여 적용압력과 온도변화에 따른 성능변화를 고찰하였다. 한외여과 관형모듈에서 광촉매 전처리수와 응집-여과-중화 전처리수의 COD, T-N은 온도 및 압력변화에 크게 영향을 받지 않고, 제거효율도 낮은 것으로 확인할 수 있었다. TDS 및 turbidity의 경우 한외여과 관형 모듈에서 광촉매 전처리수가 응집-여과-중화공정의 처리수에 비해 처리효율이 우수함을 확인하였다. T-N, TDS는 역삼투막 공정에서 우수한 제거효율을 나타내었다.

Keywords