• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.700-707
• /
• 2014

The effect of steam and ozone pretreatments on fibrillation efficiency by wet disk-milling was investigated. Hemicellulose (40%) and lignin (42%) of Korean white pine were partially removed by steam and ozone pretreatments, respectively. With increasing wet disk-milling time, the diameter of fibers was significantly decreased and its size distribution became narrow. Especially, the average diameters of lignocellulose nanofibers after steam and ozone pretreatments were 19 nm and 12 nm, respectively. Thus-obtained lignocellulose nanofibers-reinforced polyurethane composite was prepared. Tensile strength and elastic modulus were drastically improved with increasing wet disk-milling time and lignocellulose nanofiber content. Nanocomposite reinforced by lignocellulose nanofibers after two pretreatments showed higher tensile properties, compared to that reinforced by lignocellulose nanofiber without pretreatment, at the similar wet disk-milling time.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.4
• /
• pp.131-137
• /
• 2007

In this study, the biodegradation test on lignocellulose under sulfate reducing conditions was carried out. In particular, the interaction between cellulose and lignin was investigated with various g-cellulose/g-lignin (C/L) ratios: 42.15, 4.59, 2.51, 1.14 and 0.7. It was shown that the rate of cellulose degradation decreased in proportion to the lignin content. Assuming first order degradation kinetics, the consequences of competitive inhibition were graphically shown for different C/L ratios. The relation between cellulose reduction rate and C/L ratio was expressed by logarithm function with a determination coefficient of 0.97. Lignocellulose reduction rate was also described as a logarithm function of C/L ratio showing a inhibition effect by lignin. In the mean time, the rate of lignin decomposition was higher at C/L ratio of 2.51 and 1.14 compared with C/L ratios of 4.59 and 0.7, indicating that excessive extra carbon source is not appropriate for lignin biodegradation.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.268-277
• /
• 2017

In this study, lignocellulose nanofibrils (LCNFs) were prepared from Pussy willow wood powder by disk-milling after pretreatment using the cosolvent of 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac) and N,N-dimethylformamide (DMF) with different mixing ratios for different time. All pretreated samples showed native cellulose I polymorph and cellulose crystallinity was lowest when cosolvent of DMF with 30% [EMIM]Ac was used. Average crystallite size of raw material and the pretreated product by MDF and its cosolvent with 10% [EMIM]Ac was found to be about 3.2 nm and decreased with increasing pretreatment time at the DMF cosolvent with 30% [EMIM]Ac. Defibrillation efficiency was improved by loosening wood cell wall structure by the pretreatment using co-solvent system of [EMIM]Ac and DMF.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.9-16
• /
• 2015

This study was carried out to investigate the effect of delignification on properties of lignocellulose nanofibers (LCNFs) prepared by wet disk-milling (WDM) after steam and ozone oxidation pre-treatments and their nanopaper sheets. Delignification treatment was effective to obtain fine morphology with uniform fiber diameter less than 35 nm without aggregation, and increased the specific surface area (SSA) and filtration time of LCNFs. In particular, SSA and filtration time of the LCNFs prepared by WDM after ozone pretreatment increased 1.5 and 5.4 times after further delignification. Delignification also increased whiteness and decreased the redness of nanopaper sheets. The highest color difference (41.9) before and after the delignification was obtained in LCNFs prepared by WDM after the steam pretreatment. Tensile properties of nanopaper sheets were also increased by further delignification. The highest tensile strength was found to be 142 MPa.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.171-171
• /
• 2011

리그노셀룰로오스 바이오매스를 원료로 하여 발효당을 생산하고자 할 때 최종적인 당수율은 적용하는 전처리 기술의 종류와 전처리 조건에 따라 크게 달라질 수 있다는 사실은 널리 알려져 있다. 또한 전처리물의 효소당화에서 셀룰로오스의 당전환율은 효소의 종류와 사용량에 의존적이므로 부족한 전처리 효과를 일부 보완하기도 한다. 본 연구에서는 바이오매스의 효소당화에 흔히 사용되고 있는 특정효소와 최근 공급되기 시작한 새로운 효소를 시료로 하여 해바라기 줄기의 열수전처리에 이은 효소당화에서 효소의 종류가 최종 당수율, 효소당화 시간 및 전처리효과에 미치는 영향을 측정하였다. 해바라기 줄기 분말을 $180^{\circ}C$에서 30분 동안 열수전처리하였을 때 헤미셀룰로오스의 수율이 최대가 되었으나 이 조건에서는 후속 효소당화에 의한 포도당 수율이 높지 않았다. Celluclast 1.5L 혹은 Celluclast conc BG는 전처리 물의 당화속도가 상대적으로 빠른 편이었고, 이 효소에 의한 당수율은 해바라기 줄기 셀룰로오스 함량의 80% 내외였으며, 바이오매스 1g당 효소첨가량이 3ml까지 증가함에 따라 당수율도 꾸준히 증가하는 경향을 보였다. 반면에 노보자임 스코리아로부터 분양받은 효소로서 NS22074와 NS50010의 혼합물은 Celluclast보다 약 10% 더 높은 당수율을 보여주었으나 당화는 상대적으로 느리게 진행되어 72시간 이상이 소요되었다. Endoxylanase 혹은 hemicellulase 등 다른 효소를 NS22074와 NS50010의 혼합물에 가하여도 당수율의 증대 효과는 미미하거나 거의 없었다. 시험에 사용한 효소제제에는 포도당, 소르비톨 등 여러 가지 당들이 보존제 혹은 안정화제로 함유되어 있는 것으로 나타나서 사용에 주의할 필요가 이었다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.27-34
• /
• 2023

In this study, spent mushroom substrate (SMS), which consits of lignocellulosic material, was pretreated by hydrothermal method; the changes of biodegradability and methane production yield of pretreated SMS were determined according to formation of lignocellulosic biomass degrading byproducts formation during thermal pretreatment. Based on the results, all hydrothermal pretreatment temperatures showed improved solubilization performance for biomass, and the optimum pretreatment effect was observed at an pretreatment temperature of 150℃ with the highest methane production yield. However, the induced formation of furan derivatives (i.e., 5-hydroxymethylfurfural and furfural) as byproducts during hydrolysis of hemicellulose and cellulose at severe condition lowered biodegradability and methane yield when the hydrothermal pretreatment temperature was higher than 180℃. Thus, this study revealed that hydrothermal pretreatment could promote anaerobic digestion efficiency of lignocellulosic biomass and is of great importance for preventing byproducts formation through pretreatment condition control.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.1-20
• /
• 1997

목재를 분해시키는 담자균류들은 목재 및 목질복합체에 쉽사리 침투하여 복잡한 리그노셀룰로오스 복합체를 분해시킨다. 이러한 분해에는 많은 효소시스템들이 복합적으로 작용하면서 상호 협동하는 것으로 보고되고 있다. 지금까지 일려진 효소들은 통상 3개의 그룹으로 나눌 수 있는데 그 하나는 목재성분을 직접적으로 공격하는 효소균들, 예를 들면 cellulase complex, laccase(LAC), lignin peroxidase(LIP), horse-radish peroxidase(HRP), manganese-independent peroxidase(MIP) 및 protocatechuate 3,4-dioxygenase(PCD) 등이 있고, 두번째 그룹으로서 manganese-dependent peroxidase(MnP), aryl alcohol oxidase(AAO) 및 glyoxal oxidase(GLO) 등인데, 이들 효소들은 목질을 직접적으로 공격하지 않고 제1그룹의 효소들과 협동하여 작용하는 것으로 알려지고 있다. 제3그룹의 효소들은 glucose oxidase(GOD) 및 cellobiose : quinone oxidoreductase(CBQ)로서 feedback type의 효소들로서 목재고분자의 분해시 대사의 고리를 결합시켜 주는 매우 중요한 기능을 하는 효소군들이다. 그러나 이 이외에도 다른 분해기구가 밝혀지고 있으며 기타 효소들에 의한 리그노셀룰로오스의 분해반응기구의 해명에는 상당한 시간이 걸릴 것으로 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.288-296
• /
• 2017

In this study, the effect of spray-drying conditions and surfactant addition on the spray-drying yield, morphological characterization, size distribution and re-dispersity in water of spray-dried lignocellulose nanofibril (LCNF) were investigated. The freeze-dried LCNF after solvent exchange had linear fiber morphology with a diameter of 70-300 nm, and the spray-dried LCNF showed rod-like particle morphology. The spray-drying yield and particle size of spary-dried LCNF at $140^{\circ}C$ was highest and smallest, respectively. As LCNF concentration and blowing rate decreased and increased, respectively, the spray-drying yield and particle size were increased. The highest spray-drying yield was found at distearyl dimethyl ammonium chloride (DDAC) addition of 10 phr at $140^{\circ}C$. As the particle size decreased and the DDAC content increased, filtration time of spray-dried LCNF in water was decreased and increased, respectively.

• Journal of Mushroom
• /
• v.15 no.3
• /
• pp.134-138
• /
• 2017

The white button mushroom, Agaricus bisporus, is commercially the fifth most important edible mushroom, accounting for the production of 9,732 tons of mushrooms in Korea in 2015. The genus Agaricus has been known for its potential to degrade lignocellulosic materials. Chemical analyses carried out during the cultivation of A. bisporus indicated that the cellulose, hemicellulose, and lignin fractions were changed preferentially for both vegetative growth and sexual reproduction. We screened A. bisporus strains for effective biodegradation through extracellular enzyme activity using cellulase, xylanase, and ligninolytic enzymes. The enzyme biodegradations were conducted as follows: mycelia of collected strains were incubated in 0.5% CMC-MMP (malt-mops-peptone), 0.5 Xylan-MMP, and 0.5% lignin-MMP media for 14 days. Incubated mycelia were stained with 0.2% trypan blue. Eighteen strains were divided into 8 groups based on different extracellular enzyme activity in MMP media. These strains were then incubated in sterilized compost and compost media for 20 days to identify correlations between mycelial growth in compost media and extracellular enzyme activity. In this study, the coefficient of determination was the highest between mycelial growth in compost media and ligninolytic enzyme activity. It is suggested that comparison with ligninolytic enzyme activity of the tested strains is a simple method of screening for rapid mycelial growth in compost to select good mother strains for the breeding of A. bisporus.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.156-163
• /
• 2012

This research has been carried out to investigate the characteristics of cellulose nanofibers manufactured from domestic lignocellulosic materials by mechanical grinding method. The continuous grinding process was effective for loosening cell wall structure, with increasing grinding time, much smaller nanofibers were observed. Filtration time was linearly increased with increasing grinding time for all experimental materials. Relative crystallinity of cellulose was not changed by grinding process, but increased by delignification treatment. Tensile property of fiber sheets was drastically improved with increasing grinding time. Fibers sheets obtained from delignified cone stalks showed an excellent tensile strength. Consequently, it is considered that this study presented some effective information for manufacturing cellulose nanofibers with domestic plantation resources.