• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.238-238
• /
• 2010

This paper describes the design and analysis of vibration driven energy harvester for low frequency. The maximum output powers at load were $124.2{\sim}132.2\;{\mu}W$ with magnets during 3 mm input displacement at 6 Hz resonant frequency of system.

• Safe Food
• /
• 제5권4호
• /
• pp.12-18
• /
• 2010

• Safe Food
• /
• 제5권3호
• /
• pp.19-26
• /
• 2010

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.340-341
• /
• 2019

배터리의 수명에 영향을 주는 충전기의 성능이 중요하기 때문에 DC-DC 컨버터의 손실 저감은 곧 충전기의 성능 향상과 직결된다. 이에 따라 본 논문에서는 DC-DC 풀브릿지 부스트 컨버터에 액티브 클램프 회로를 추가하여 ZVS 동작을 통해 스위치 턴 온 시 생기는 전력 손실을 저감한다. 그로써 EV 배터리 충전기의 향상된 성능을 시뮬레이션을 통해 검증한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.48-51
• /
• 1997

This paper presents the algorithm of FIC inspection in chip mounter. When device is mounted on the PCB, it is impossible to get zero defects since there are many problems which can not be predicted. Of these problems, devices with bent corner leads due to mis-handling and which are not placed at a given point measured along the axis are principal problem in SMT(Surface Mounting Technology). In this paper, we proposed a new algorithm based on the Radon transform which uses a projection to inspect the FIC(Flat Integrated Circuit) device and compared this method with other algorithms. We measured the position error and applied this algorithm to our image processing board which is characterized by line scan camera. We compared speed and accuracy in our board.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.365-370
• /
• 1997

In this paper we suggest a development of surface defect inspection algorithms for cold mill strip using tree structure. The defects which exist in a surface of cold mill strip have a scattering or singular distribution. This paper consists of preprocessing, feature extraction and defect classification. By preprocessing, the binarized defect image is achieved. In this procedure, Top-hit transform, adaptive thresholding, thinning and noise rejection are used. Especially, Top-hit transform using local min/max operation diminishes the effect of bad lighting. In feature extraction, geometric, moment, co-occurrence matrix, histogram-ratio features are calculated. The histogram-ratio feature is taken from the gray-level image. For the defect classification, we suggest a tree structure of which nodes are multilayer neural network clasifiers. The proposed algorithm reduced error rate comparing to one stage structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.217-217
• /
• 2009

This paper describes the characteristics of polycrystalline 3C-SiC doubly clamped beam micro resonators. The polycrystalline 3C-SiC doubly clamped beam resonators with 60 ~ 100 ${\mu}m$ lengths, $10\;{\mu}m$ width, and $0.4\;{\mu}m$ thickness were fabricated using a surface micromachining technique. Polycrystalline 3C-SiC micro resonators were actuated by piezoelectric element and their fundamental resonant frequency was measured by a laser vibrometer in vacuum at room temperature. For the 60 ~ 100 ${\mu}m$ long cantilevers, the fundamental frequency appeared at 373.4 ~ 908.1 kHz. The resonant frequencies of doubly clamped beam with lengths were higher than simulated results because of tensile stress. Therefore, polycrystalline 3C-SiC doubly clamped beam micro resonators are suitable for RF MEMS devices and bio/chemical sensor applications.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1994년도 춘계학술대회 and 제3회 신약개발 연구발표회
• /
• pp.220-220
• /
• 1994

출발물질로 L-tyrosine을 사용하여 요오드화, 에스테르화, N-BOC 및 0-Bn보호기화 및 N 탈보호기화를 행하여 5단계에 걸쳐 41%의 수율로 methyl 0-Bn-3-iodotyrosinate를 합성하였다. 또한 Ullmann coupling의 반응성 향상을 위해 5위치에 nilro기가 도입된 methyl 0-Bn-3-iodo-5-nitrotyrosinate를 좋은 수율로 합성하였다. 이들에 N-BOC-tyrosine을 결합시켜 대응하는 dipeptide를44% 및 39%의 수율로 각각 얻었다. 일단 dipeptide에 대해 Ullmann coupling을 행하였으나 원하는 cyclic product는 얻을수 없었다. 전년도에 이어 methyl N-BOC-0-Bn-3-hydroxytyrosinate를 합성하였다. 이로 부터 4-iodobenzaldehyde에 Ullmann coupling을 행하여 원하는 페놀성 biaryl ether를 합성하고자 하였다. 또한 $\beta$-hydroxyhomoserine의 합성을 위해 출발물질로 cis-1,4-buterdiol을 사용하여 12단계의 합성반응을 행하여 좋은수율로 원하는 화합물을 합성하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.317-321
• /
• 1989

The fully digitalized inverter has some difficulties in implementation because of the limitation of available memory capacity and computation time. In this paper schemes suitable for a one-chip microprocessor-based realization, which linearize notch angles of selected harmonic elimination (SHE) PWM, are presented. Also the detailed description of the scheme along with the realization is described. The simulation and experiment results show that proposed schemes have the predicted advantages such as good voltage waveforms and a memory-saving.

• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.499-505
• /
• 1998

In developing an automated surface inspect algorithm, we have designed a hierarchical classifier using neural network. The defects which exist on the surface of cold mill strip have a scattering or singular distribution. We have considered three major problems, that is preprocessing, feature extraction and defect classification. In preprocessing, Top-hit transform, adaptive thresholding, thinning and noise rejection are used Especially, Top-hit transform using local minimax operation diminishes the effect of bad lighting. In feature extraction, geometric, moment, co-occurrence matrix, and histogram ratio features are calculated. The histogram ratio feature is taken from the gray-level image. For defect classification, we suggest a hierarchical structure of which nodes are multilayer neural network classifiers. The proposed algorithm reduced error rate by comparing to one-stage structure.