Shakil, Sejan Mohammad Abrar;An, Jinyoung;Han, Daehyun;Chung, Wan-Young
Journal of the Institute of Convergence Signal Processing
/
v.20
no.1
/
pp.16-23
/
2019
Fine particulate matter known as PM 2.5 refers to the atmospheric particulate matter that has a diameter less than 2.5 micrometer identified as dangerous element for human health and its concentration can provide us a clear picture about air dust concentration. Humans stay indoor almost 90% of their life time and also there is no official indoor dust concentration data, so our study is focused on measuring the indoor air quality. Indoor dust data monitoring is very important in hospital environments beside that other places can also be considered for monitoring like classrooms, cements factories, computer server rooms, petrochemical storage etc. In this paper, visible light communication system is proposed by Manchester encoding technique for electromagnetic interference (EMI)-free indoor dust monitoring. Important indoor environment information like dust concentration is transferred by visible light channel in wide range. An average voltage-tracking technique is utilized for robust light detection to eliminate ambient light and low-frequency noise. The incoming light is recognized by a photo diode and are simultaneously processed by a receiver micro-controller. We can monitor indoor air quality in real-time and can take necessary action according to the result.
The PR (Photo Resist) process in the semiconductor process is a process that uses a mixture of flammable substances. Due to the process equipment is installed in a clean room and when flammable substances leak, there is a high risk of suffocation, fire, and explosion. It is necessary to analyze the impact of accidents that may occur during operation and to evaluate whether the safety of workers can be guaranteed. In this study, the value of radiant heat and temperature change at the monitor point set up virtual inside the clean room was confirmed through CFD simulation of 10 leak and fire scenarios using the FLACS CFD - Fire Module. A fire that occurs inside a clean room transfers high radiant heat to the inter-story structure, but its scope is quite limited, and it is unlikely that it will collapse in a single fire accident. There was no scenario in which two stairs leading to the exit were exposed to high radiant heat at the same time due to a fire accident, therefore workers were able to escape in case of a fire. In addition, it was confirmed that the level of radiant heat and temperature rise rapidly decreased as they moved downstairs. According to the API 520 standard, workers exposed to 6.31 kW/m2 of radiant heat that workers can withstand for 30 seconds were confirmed that it was possible to sufficiently escape from the inside.
Journal of Korean Library and Information Science Society
/
v.52
no.4
/
pp.103-126
/
2021
This study aims to propose a plan to restructure libraries as a complex space for education and culture for 19 public libraries belonging to the Chungcheongnam-do Office of Education. For the purpose of this, case surveys and user surveys of complex facilities of domestic and foreign public institutions were conducted. Based on the findings, a space restructuring strategy was suggested by dividing the library space into the following ways: a space to learn (a comprehensive data room, a theme data inquiry room, a future classroom, a blended learning center, a STEAM training room, and an online lecture learning room), a space to express (a foyer, a maker room, a digital media creation room and an online lecture production room), a space to share (a club room, a group study room, a well-being complex culture space, a convenient living space, rest area, and a browsing area), and a space to enjoy (a performance-thought playground, infant and child archives, a digital virtual experience room, a specialized alcove room, and an outdoor reading room). In addition, a restructuring model of public libraries belonging to the Office of Education was proposed, such as a leading model, a basic model, a joint model, and a minimum model, in consideration of the size of the building, the size of the library, and the level of service and space.
Journal of the Korea Society of Computer and Information
/
v.27
no.3
/
pp.209-216
/
2022
In this paper, we propose an effective software education program to promote employment of the disabled and verify the effectiveness of SW education through pilot operation. In this SW education program, we develop a SW curriculum consisting of the basic course, Unity programming course, and the advanced course, AR/VR digital content development course. The SW education achievement standard develops the basic and advanced course achievement standards in consideration of the level of the virtual reality content production job of the National Competency Standards(NCS) and the SW education achievement standards of youth with visual, hearing, and physical disabilities. SW education materials are developed on a project basis so that one AR/VR digital content can be implemented step by step according to the intellectual level of the disabled based on Unity. SW education pilot training is conducted as online education based on Blended Learning due to COVID-19. In order to derive the SW education effect and each learner's individual SW education academic achievement for the SW education pilot training, a survey is conducted on learners, and the results are analyzed. In the basic course, 77.3% of learners achieved academic achievement above excellent(80-90), and in the advanced course, 48.8% of learners achieved academic achievement above excellent(80-90). These results verify that the SW education program for the disabled developed in this paper is effective in activating employment for the disabled.
Lee, Kwang Won;Hong, Jung Hyun;Chung, Sun Hwa;Kim, Young Kyun;Park, Shinsung;Park, Su In;Shin, Moon Sam
The Journal of the Convergence on Culture Technology
/
v.7
no.4
/
pp.845-855
/
2021
In this study, Camellia sinensis Leaf cultivated in Boseong was extracted by vacuum distillation and hydrothermal extraction methods, and we performed in vitro experiments such as antioxidant, anti-wrinkle, whitening, and antibacterial activity test and HPLC analysis. Wrinkle improvement (elastase inhibition assay) and whitening effect (mushroom tyrosinase inhibition assay) of Boseong vacuum distilled extract have excellent results and IC50 values of vacuum distillation extract was measured at a lower concentration than that of the hydrothermal extract. The antioxidant activity of the Boseong hydrothermal extract was excellently measured in DPPH radical and ABTS+ radical scavenging activity, SOD-like activity, and total polyphenol content. In the antibacterial experiment, the Boseong hydrothermal extract formed a clear zone for the Staphylococcus aureus and Cutibacterium acnes strain. As a result of HPLC analysis, EGCG and caffeine in the hydrothermal extract were 40.29 mg/g, 9.94 mg/g respectively, and caffeine in the vacuum distilled extract was 3.40 mg/g. Therefore, we examined that Boseong Camellia sinensis vacuum distilled extract has excellent anti-wrinkle and whitening effect, and its hydrothermal extract has good antioxidant and antibacterial efficacy.
Journal of Korea Entertainment Industry Association
/
v.14
no.7
/
pp.161-173
/
2020
In-depth interview in the field of hospitality industry services was conducted in COVID- 19. Introduction of kiosks for non-face-to-face services using untact technology, reservation, pay systems, self-service, service improvement using room service should be carried out. It is also necessary to implement Instagram, Facebook, YouTube, P-blogs, online broadcasting and live commerce through the establishment of m-channel system through untact marketing sales channels in the hospitality industry now that the product composition to solve the pro -blem of untact marketing is drawing attention due to diversification of online sales channe -ls. Now, the recognition of important elements of service education and a establishment of differentiated system of untact marketing, expansion of untact sale channel, implementation of non-face-to-face counseling service and introduction of pre-booking, telecommuting were recognized as urgent parts. In particular, a service differentiation and importance of human services, which were recognized free of charge, have re-recognized as premium, and quality service aspect of the hospitality industry in untact and the direction to diversify marketing channels are presented.
Measurement of impact sound insulation of floor, by current Korean Standard KS F 2810-2. is to be made with peak levels over 4 point in a receiving room. But it is often the case that there is inconsistency in results at various receiving points in the receiving room. Such variations obviously have effects on the repeatability and reproducibility of measured data. The result shows that there are even 10 dB deviations in 63Hz octave band frequency range and relatively less variations are occurred in other low frequency ranges. Such variations seems to be coming from modal overlaps of the receiving room. According to current rating method of floor impact sound. KS F 2863-2, that may affect on the single number latins scheme. From the result of tests in this study, there are 2dB to 6dB differences in the sin91e number with the combination of measurement points. This means that the reduction of measurement variations from the microphone positions is needed for a better credibility of measurement results.
Most of receiving rooms for the measurement of floor impact sound have rectangular shapes with couple of meters of dimension, with reflective finishing, no furniture, no curtains. Modal overlaps in those condition are the major reason for the low reproducibility, and as a matter of course, the low credibility. It is the major purpose of this study that searching for a better measurement method which mitigate the effect of modal overlap on measurement. Two ways of methods are tested. One is the way described in ISO standards which enables controlling the room modes of receiving rooms, the other is the way which enables to get more precise spatial averages in receiving rooms with room modes. It is not easy maintaining the reverberation time of low frequency bands in the range between 1s and 2s, though it is proven to be effective controlling the room modes with base traps. Space-time average SPL's through combinations of rotating microphones are easy to measure, and have good consistencies with average SPL of entire receiving room.
Journal of the Korean Society of Food Science and Nutrition
/
v.33
no.8
/
pp.1302-1310
/
2004
The purpose of this study was to investigate whether a web-based nutrition counseling could lead to beneficial outcomes in food intake and serum lipids of patients with hyperlipidemia. Forty hyperlipidemic patients, twenty of them were hypercholesterolemia and the other twenty were hypertriglyceridemia, participated in a web-based nutrition counseling program. At the first nutrition counseling, the patients were counselled through interview and then follow up nutrition counseling was accomplished four times during eight weeks through a web-based internet program. Various markers of disease risk including anthropometric indices, food intakes and serum lipid levels were measured before and after the web-based nutrition counseling. After nutrition counseling, body mass index significantly decreased in both groups and waist to hip ratio significantly decreased in male hypercholesterolemic patients (p<0.05). Total-cholesterol decreased from 262.2 mg/dL to 234.9 mg/dL, LDL-cholesterol decreased from 186.8 mg/dL to 160.5 mg/dL in hypercholesterolemic patients, triglyceride decreased from 288.6 mg/dL to 211.9 mg/dL and total-cholesterol decreased from 217.2 mg/dL to 198.7 mg/dL in hypertriglyceridemic patients after nutrition counseling. Anthropometric value and nutrient intakes were improved after nutrition counseling. Energy, fat and saturated fatty acid intakes decreased significantly in both groups (p<0.05). Therefore, this study shows that the web-based nutrition counseling is effective in improving food habit and influences positively in serum lipid levels of the patients. In addition, these results indicate that internet presents us with potential as a new medium for nutrition counseling in informationized society.
This study was carried out to enhance the competitiveness of blackbox design for domestic and international companies, based on the explosive growth of the blackbox market due to development of blackbox design for vehicle accident prevention and post-treatment. In the past, the blackbox market has produced products indiscriminately to meet the ever-increasing demand of consumers. Therefore, we thought a new design method was necessary to effectively investigate the needs of rapidly changing consumers. In this study, we aimed to identify the best-selling blackbox to understand the design flow, and the optimum area for a blackbox, considering the uniqueness of associated vehicle. Based on discussion with blackbox design experts, we studied the direction of design and the problems with blackbox use, which were reflected in blackbox development. Through this research, two types of design - leading blackbox (A type) and mass production blackbox (B type) - were proposed for compatibility of the blackbox with the car. The leading type of blackbox was positioned so that it was wrapped with the room mirror hinge before the screw was fastened, in order to achieve an integrated design. Therefore, we designed an integrated form and resolved the placement problem of an adhesive blackbox. To blend, the mass production blackbox implemented material and surface processing in the same way with the car, and adopted the slide structure to automatically turn off the main body power when removing the SDcard, reflecting consumer needs. This study considers evolving consumer needs through a case study and collective intelligence and deals with implementation of the whole design process during mass production. In this study, we aimed to strengthen the competitiveness of the blackbox design based on design method and its realization.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.