• ICROS
• /
• v.21 no.1
• /
• pp.31-36
• /
• 2015

운전자에게 편의성을 제공하는 차량의 주행관련 Advanced driver assist system (ADAS)에는 차량의 종방향과 횡방향 운동에 대한 제어기가 요구된다. 횡방향 제어를 위해서는 조향 시스템의 조향각 제어가 요구되는데 최근 구조적으로 간단하고 연비향상, 차량의 중량 감소, 빠른 응답성을 가지고 있는 전기적 파워 조향 (Electric power steering, EPS) 시스템이 자동차 산업에서 널리 사용되고 있다. 차량의 주행관련 ADAS를 사용하여 자율 주행 시 EPS 시스템은 상위 제어기에서 계산된 필요한 조향각을 추종 할 수 있도록 조향 핸들의 각 제어를 해야 한다. 그러나 일반적인 EPS 시스템은 운전자가 조향 핸들에 인가된 토크를 보조해 줄 수 있는 토크를 출력해 준다. 본 논문에서는 이러한 문제를 해결하는 방법들을 설명한다. 먼저 EPS 시스템의 기본 기능에 대해서 설명을 하고, 자율 추행 차량을 위한 조항 핸들의 각 제어를 위한 proportional-integral 제어, 슬라이딩 모드 제어 (Sliding mode control), 관측기 기반 비선형 댐핑 제어(Observer based nonlinear damping control) 등과 같은 다양한 기법의 제어 알고리즘들에 대한 방법들이 고찰되었다.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.1
• /
• pp.58-63
• /
• 1999

In this paper, We present a direction indicator algorithm for a mobile robot which uses VFF and neural networks. The structure of this neural network navigation system is composed of sensor system, backpropagation learning controllers for adjusting weight and the motion control system for real-time execution. The experimental results show that the direction indicator system operates properlv and strongly at any circumstance

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.1
• /
• pp.27-32
• /
• 2002

This paper describes a fuzzy steering controller for an outdoor autonomous mobile robot using MR(magneto-resistive) sensor. Using the magnetic field difference values(dBy, dBz) obtained from the MR sensor, we designed fuzzy logic controller for driving the robot on the road center and proposed a method to eliminate the Earth magnetic field. To develop an autonomous mobile robot simulation program, we have done modeling MR sensor, mobile robot and coordinate transformation. A computer simulation of the robot including mobile robot dynamics and steering was used to verify the driving performance of the mobile robot controller using the fuzzy logic. So, we confirmed the robustness of the proposed fuzzy controller by computer simulation.

• ICROS
• /
• v.2 no.2
• /
• pp.57-65
• /
• 1996

본 고에서는 최근에 가장 대표적인 능동형 샤시시스템으로 부각되고 있는 각종 능동식 현가시스템 및 4륜 조향 시스템의 개발동향 및 기술적, 경제적인 측면에서의 종합적인 검토를 하고자 한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.9
• /
• pp.92-97
• /
• 2022

In this paper, as a research on autonomous steering for agriculture, a sensor module for furrow recognition was developed through a low-cost distance sensor combination. The developed sensor module was applied to the vehicle, and when driving in a furrow curve, the autonomous steering success rate was 100% at a curvature of 20 m or more, and 70% at a curvature of 15 m or less. The self-steering success rate according to the ground condition showed a 100% success rate regardless of soil, weeds, or mulching film.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1113-1114
• /
• 1996

We describe an algorithm to control an autonomous guided vehicle with 2-diagonal driving wheels, which navigates in the clean room.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.5
• /
• pp.570-576
• /
• 2012

In this research a moving platform for a mobile robot which can run with upright posture is proposed. It is able to stand with standing arms and run uprightly based on an inverted pendulum mechanism. Conventional mobile robots generally may equip 4 wheels or 3 wheels including a caster and have good statistic stability. They need a steering mechanism to choose which way to go since they have a square or rectangular configuration with multiple wheels. When a mobile robot meets a sharply perpendicular and narrow crossroad, it may need a special steering scheme such as going forward and backward repeatedly or it sometimes cannot even pass through the crossroad because of its size. The proposed moving platform for a mobile robot changes to a upright posture which has a small planar area and is able to pass through the crossroad. We propose a moving platform for a mobile robot with a inverted pendulum mechanism and standing arms which can make the mobile robot upright.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.39-43
• /
• 2016

In this paper, we propose PID gain auto tuning method in steering type mobile robot. PID controller gain select method are various methods. Ziegler-Nichols step tuning method is one method tuning in PID controller. Use step tuning method find a the first gain and did experiment in steering mobile robot. and Make a new the second gains from the first gains. After appling the second gain in PID controller, Where perform observe for convergence time and stabilization error. Experiments result the second gain are useful in real steering mobile robot system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.6
• /
• pp.578-584
• /
• 2015

In this study a moving platform for a mobile robot that can be traveling with a full automatic standing arm was developed. Conventional mobile robots generally may equip 4 wheels or 3 wheels with a caster wheel or independent driven wheels and have good statistic stability. When a mobile robot travels on a sharply perpendicular and narrow crossroad, it may need a special steering scheme such as going forward and backward repeatedly or it is sometimes physically impossible for the robot to go through the crossroad because of the size limit. The upright running mobile robot changes its posture to the upright posture which has a small planar area and is able to go through the crossroad. The upright control which was manually performed step by step before such as sequences of uprighting (returning), checking, and balancing, is now automated.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.9
• /
• pp.70-75
• /
• 2021

We developed a platform that was capable of autonomous steering in a furrow environment. It was developed to autonomously control steering by recognizing the furrow using a laser distance, three-axis tilt, and temperature sensor. The performance evaluation indicated that the autonomous steering success rate was 99.17%, and it was possible to climb up to 5° on the slope. The usage time was approximately 40 h, and the maximum speed was 6.7 km/h.