• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.885-891
• /
• 1995

This paper discussed on the observation of dynamic domain patterns using Lorentz SEM in the frequency region of 50 Hz-10 kHz. The observed dynamic domain patterns were compared with the simulated ones. The observation rrethod is characterized by using the slight difference between the exciting frequency and the multiples of the scannning frequency of SEM.

• Journal of Digital Convergence
• /
• v.16 no.9
• /
• pp.107-114
• /
• 2018

Since China's economic reform in 1978, international trade has enormously flourished and the port industry is reckoned as a key factor contributing to this growth. This study examines the Bohai Rim port group in the scope of top three largest ports Qingdao, Dalian and Tianjin. By utilizing indicators including concentration ratio (CR), Herfindahl-Hirschman index (HHI), the Gini coefficient and the Lorenz curve as well as shift-share analysis (SSA), the concentration level of this port group in the period 2004-2016 is discussed. As a results, CR demonstrates a decrease during the studied period with a minor fluctuation, and HHI index shows a trend of deconcentration with Bohai Rim port group. In addition, SSA indicates that during the period 2004-2016, the overall shift index of Qingdao port was -1.371 meanwhile with Tianjin and Dalian port were 0.118 and 1.252 in turn. These results suggest that the growth in regional influence of Tianjin and Dalian ports would motivate to the deconcentration pattern in Bohai Rim region. The findings assist decision makers and scholars to obtain knowledge about the port development this region. Considering the geographic position of these three ports as the gate of northeast China, it is suggested that these three ports could explore their advantages and cooperate with the small ports in the surrounding area to enhance their influences in the future study.

• Journal of Environmental Policy
• /
• v.10 no.2
• /
• pp.21-44
• /
• 2011

It is important to consider an equitable allocation framework for domestic GHG emission reduction. First, the study established criteria and indicators for the National Allocation Plan (NAP) based on the principles of cost-efficiency and social-acceptance, and performed a case study of the sectoral effort sharing method, using the effort sharing index. The equity analysis of effort sharing based on sectoral preferences and inter-sectoral equity using a Lorenz Curve are performed. The equitable method is more likely to be suitable than the economic one which considers just reduction potential. Equitable effort sharing reflects a higher level of equity than economic effort sharing. At the same time, the equitable effort sharing method is essential for reflecting equity and establishing criteria for equity because evaluation with the equitable effort sharing method depends in particular on the weight of equity criteria. The result suggests the importance of consideration of equity and the establishment of equity criteria. In conclusion, it is critical to consider not only cost-efficiency but equity in policy decision making in terms of the sectoral effort sharing for national GHG reduction target.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.2
• /
• pp.15-23
• /
• 2019

High temperature superconducting (HTS) generators for wind power systems are attractively researched with the advantages of high efficiency and smaller size compared with conventional generator. However, the HTS generators have high Lorentz force problem, which acts on HTS field coils due to their high current density and magnetic field. This paper deals with characteristic analysis of the modularized HTS field coil for a 750 kW superconducting wind power generator according to field coil structure. The modularized HTS field coil structure was designed based on the electromagnetic and mechanical analysis results obtained using a 3D finite element method. The electromagnetic force of the module coil was also analyzed. As a result, the perpendicular and maximum magnetic fields of the HTS coils were 2.5 T and 3.9 T, respectively. The maximum stress of the supports was less than the allowable stress of the glass-fiber reinforced plastic material, and displacement was within the acceptable range. The design specifications and the results of the HTS module coil structure can be effectively utilized to develop large-scale superconducting wind power generators.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.311-317
• /
• 2005

It has been the most progressive interruption technique to use the ablation gas from the surface of PTFE nozzle driven by arc plasma during switching process in $SF_6$ gas circuit breakers. This advanced interruption technique can reduce the required mechanical energy to compress and blow the gas for extinguishing the arc plasma between the electrodes due to using the ablation effect instead. In order to consider the phenomena during calculation of switching process, it is required to confirm the principles of ablation from PTFE nozzle as well as of arc plasma during switching process. In this study, we have calculated the switching process considered the ablation of PTFE nozzle driven by arc plasma using multidisciplinary simulation technique and compared the results with the data without the ablation effect. More $50\%$ difference of pressure rise inside expansion chamber has been found from the results and it should be indispensable for this type of computational work to consider and include the ablation effect of PTFE nozzle. Further study on turbulence and radiation will be followed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.564-564
• /
• 2013

홀 추력기는 플라즈마를 이용하는 전기추력기 중 하나로, 인공위성의 자세제어, 궤도수정, 궤도천이 뿐만아니라 행성간 임무수행을 위한 우주선의 엔진으로 사용된다. 홀 추력기 채널 내부에 발생된 Xe 이온들은 양극과 음극 사이에 존재하는 전기장에 의해 가속되어 추력을 발생시킨다. 이때 Xe 이온들은 자기장에 의해 감금된 전자와 중성 Xe 원자 사이의 충돌에 의해 발생하며, 실험적 및 이론적 연구를 통해 단일 전하를 띤 이온(Xe II)뿐만 아니라 다중 전하(Xe III 등)를 띤 이온도 생성되는 것으로 알려져 있다. 이온의 전하량 비율은 홀 추력기의 추력효율 및 연료효율에 영향을 미치며, 다중 전하를 띤 이온의 높은 에너지는 채널벽의 침식문제를 야기하는 등 홀 추력기 이온빔의 전하량 분석 연구는 물리적 연구측면 뿐만아니라 실용적인 측면에서도 매우 중요하다. 본 연구에서는 자기장과 그에 수직한 방향의 전기장에서 발생하는 로렌츠 힘을 이용하여 이온의 전하량을 분석할 수 있는 $E{\times}B$ 탐침을 설계 및 개발하였다. 개발된 $E{\times}B$ 탐침은 70 mm 길이의 집속기와 $148{\times}138{\times}90mm$의 본체, 40 mm길이의 콜렉터로 구성된다. $E{\times}B$ 탐침 설계에 가장 중요한 균일한 자기장 설계를 위해 전산모사를 통해 최적화 작업을 진행하였으며, 실험을 위한 진단계의 최적화와 초기 실험결과가 발표될 예정이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.8
• /
• pp.697-703
• /
• 2017

A teflon ionization modeling has been conducted to predict the performance of a PPT(Pulsed Plasma Thruster). One dimensional unsteady circuit model and Teflon ablation model were implemented. The Saha equation was adapted to predict the ionization of Carbon and Fluorine gas. The lumped circuit model including a resistance and a inductance model of a plasma was adapted to predict the magnitude of a discharge current. Numerical simulation results had good agreements with pervious research. The degree of current change according to PPT operating voltage was examined.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.185-190
• /
• 2005

A systematic output tracking control design technique for robust control of Takagi-Sugeno (T-S) fuzzy systems with norm bounded uncertainties is developed. The uncertain T-S fuzzy system is first represented as a set of uncertain local linear systems. The tracking problem is then converted into the stabilization problem for a set of uncertain local linear systems thereby leading to a more feasible controller design procedure. A sufficient condition for robust asymptotic output tracking is derived in terms of a set of linear matrix inequalities. A stability condition on the traversing time instances is also established. The output tracking control simulation for a flexible-joint robot-arm model is demonstrated, to convincingly show the effectiveness of the proposed system modeling and controller design.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.365-368
• /
• 2002

The design of industrial arc plasma systems is still largely based on trial and error although the situation is rapidly improving because of the available computational power at a cost which is still fast coming down. The desire to predict the behavior of arc plasma system, thus reducing the development cost, has been the motivation of arc research. To interrupt fault current, the most enormous duty of a circuit breaker, is achieved by separating two contacts in a interruption medium, $SF_{6}$ gas or air etc., and arc plasma is inevitably established between the contacts. The arc must be controlled and interrupted at an appropriate current zero. In order to analyze arc behavior in $SF_{6}$ gas circuit breakers, a numerical calculation method combined with flow field and electromagnetic field has been developed. The method has been applied to model arc generated in the Aachen nozzle and compared the results with the experimental results. Next, we have simulated the unsteady flow characteristics to be induced by arcing of AC cycle, and conformed that the method can predict arc behavior in account of thermal transport to $SF_{6}$ gas around the arc, such as increase of arc voltage near current zero and dependency of arc radius on arc current to maintain constant arc current density.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.43-49
• /
• 2007

A new electric coil design methodology using the notion of topology optimization is developed. The specific design problem in consideration is to find optimal coil configuration that maximizes the Lorentz force under given magnetic field. Topology optimization is usually formulated using the finite element method, but the novel feature of this method is that no such partial differential equation solver is employed during the whole optimization process. The proposed methodology allows the determination of not only coil shape but also the number of coil turns which is not possible to determine by any existing topology optimization concept and to perform single coil strand identification algorithm. The specific applications are made in the design of two-dimensional fine-pattern focusing coils of an optical pickup actuator. In this method, the concept of equivalent magnetizing current is utilized to calculate the Lorentz force, and the optimal coil configuration is obtained without any initial layout. The method is capable of generating the location and shape of turns of coil. To confirm the effectiveness of the proposed method in optical pickup applications, design problems involving multipolar permanent magnets are considered.