Characteristic Analysis of Modularized HTS Field Coils for a Superconducting Wind Power Generator According to Field Coil Structure
![]() |
Tuvdensuren, Oyunjargal
(창원대학교 전기공학과)
Go, Byeong-Soo (창원대학교 전기공학과) Sung, Hae-Jin (창원대학교 전기공학과) Park, Min-Won (창원대학교 전기공학과) Yu, In-Keun (창원대학교 전기공학과) |
1 | Jung, H., Lee, C.G., Hahn, S.C. and Jung, S.Y., “Optimal design of a direct driven PM wind generator aimed at maximum AEP using Coupled FEA and Parallel Computing GA,” Journal of Electrical Engineering & Technology, Vol. 3, No. 4, pp. 552-558, 2008. DOI |
2 | Polinder, H., Van der Pijl, F.F.A., De Vilder, G.J. and Tavner, P.J., “Comparison of direct drive and geared generator concepts for wind turbines,” IEEE Transactions on Energy Conversion, Vol. 21, No. 3, pp. 725-733, 2006. DOI |
3 | McDonald, A., "Structural analysis of low speed, high torque electrical generators for direct drive renewable energy converters," Ph.D. dissertation, School of Engineering & Electronics, University of Edinburgh, 2008. |
4 | Young, G.P., Woo, S.L., Jeyull, L., Seunghyun, S., Young, J.H., Yoon, D.C. and Tae, K.K., "Operational characteristics of HTS coils with flux diverters in semipersistent mode under alternating magnetic field," IEEE Transactions on Applied Superconductivity, Vol. 26, No. 4, Art. No. 5204105, 2016. |
5 | Hiroyuki, O., Yutaka, T., Rashidul, M.Q. and Masaki, S., "Electromagnetic characteristics of 10 MW class superconducting wind turbine generators," IEEE Electrical Machine and System (ICEMS), pp.1303-1306, 2010. |
6 | Klaus, G., Wilke, M., Frauenhofer, J., Nick, W. and Neumuller, H.W., "Design challenges and benefits of HTS synchronous machines," IEEE Power & Energy Society General Meeting, pp. 1-8, 2007. |
7 | Oomen, M., Herkert, W., Bayer, D., Kummeth, P., Nick, W. and Arndt. T., "Manufacturing and test of 2G HTS coils for rotating machines: challenges, conductor requirements, realization," Physica C: Superconducting, Vol. 482, pp. 111-118, 2012. DOI |
8 | Go, B.S., Sung, H.J., Choi, J., Park, M. and Yu, I.K., "Modularization of the HTS field coils for a large scale superconducting generator," IEEE Transactions on Applied Superconductivity, Vol. 26, No. 3, Art. No. 5202905, 2016. |
9 | Zhang, W., Xia, D. and Dong, Z., "Analysis of the strain and stress in the HTS generator at different operating conditions," IEEE Transactions on Applied Superconductivity, Vol. 27, No. 4, Art. No. 5203405, 2017. |
10 | Wahl, L., Maas, S., Waldmann, D., Zurbes, A. and Freres, P., "Shear stresses in honeycomb sandwich plates: Analytical solution, finite element method and experimental verification," Journal of Sandwich Structure and Materials, Vol. 14, pp. 449-468, 2012. DOI |
11 | Kiruba, S.H., Swarn, K., Tabea A. and Ernst, W.S., "High power density supercoducting rotating machines development status and technology roadmap," Superconducting Science and Technology, Vol. 30, Art. No. 123002, 2017. |
12 | Han, W. C. and Kiruba, S., "Force analysis of superconducting coils in actively shielded air-core superconducting machines" IEEE Transactions on Applied Superconductivity, Vol. 28, No. 5, Art. No. 5206808, 2018. |
13 | Rouhollah, S. and Fatemeh, A., "Design of a combined screening and damping layer for a 10 MW class wind turbine HTS synchronous generator," IEEE Transactions on Applied Superconductivity, Vol. 28, No. 6, Art. No. 5208312, 2018. |
14 | http://www.theva.com/products (Accessed on November 9th, 2018) |
15 | Go, B.S., Sung, H.J., Park, M. and Yu, I.K., "Structural design of a module coil for a 12 MW class HTS generator for wind turbine," IEEE Transactions on Applied Superconductivity, Vol. 27, No. 4, Art. No. 5202405, 2017. |
16 | Weise, K., Schmidt, R., Carlstedt, M., Ziolkowski, M., Brauer, H. and Toepfer, H., "Optimal magnet design for Lorentz force eddy-current testing," IEEE Transactions on Magnetics, Vol. 51, No. 9, Art. No. 6201415, 2015. |
![]() |