• Journal of agriculture & life science
• /
• v.43 no.5
• /
• pp.17-25
• /
• 2009

The purpose of this study was to find out the optimum germination temperature and dehydration period at SMP processing, and applies 3 kind of seed treatment and compares yield with stand establishment of seeds of 12 pepper cultivars. It was showed that all 12 cultivars of nontreated seed does not entirely germinated in $15^{\circ}C$. It was that SMP seed germination rate 77(Yeomyeong)~100% (Deawang) high, and seeds 12 cultivars was tendency high by more than 93% at all temperatures excepting Bugang($35^{\circ}C$, 85%) and Yeomyeong($15^{\circ}C$, 77%). Dehydration condition of result were Gumsure, Dongbang Jonggagip, Hyangchon, Yeomyeong, Kwangbok, Wang by which 3 hours in $45^{\circ}C$ were proper, which 6 hours in $35^{\circ}C$ were proper Manitta, Joyang, and judged that 12 hours in $25^{\circ}C$ were proper in Bugang, Dabotap, Deawang. It was reported that water percentage of moisture content change of pepper seed by dehydration was difference a little in species, but was judged by 3-6 hours in $45^{\circ}C$. There was compared to SMP, Osmopriming, pH control by stand establishment were shown pH control of Hyangchon, Dabotap species was nontreated, osmopriming treatment. Also, Kwangbok species was tendency that stand establishment was low, and Deawang was good than other species. Yield of nontreated of yield day was tendency, and miss planted rate also appeared high for 90 day. There was difference in species, and processing of pH control and osmopriming was not shown stand establishment that is stabilized in all species. SMP processing condition could bring security of stable stand establishment in all species, and was considered that research that was under various environment condition should be proceeded conclusively.

• Korean Journal of Remote Sensing
• /
• v.23 no.2
• /
• pp.145-152
• /
• 2007

The polarimetric backscattering coefficients of a wet-land rice field which is an experimental plot belong to National Institute of Agricultural Science and Technology in Suwon are measured using ground-based polarimetric scatterometers at 1.8 and 5.3 GHz throughout a growth year from transplanting period to harvest period (May to October in 2006). The polarimetric scatterometers consist of a vector network analyzer with time-gating function and polarimetric antenna set, and are well calibrated to get VV-, HV-, VH-, HH-polarized backscattering coefficients from the measurements, based on single target calibration technique using a trihedral corner reflector. The polarimetric backscattering coefficients are measured at $30^{\circ},\;40^{\circ},\;50^{\circ}\;and\;60^{\circ}$ with 30 independent samples for each incidence angle at each frequency. In the measurement periods the ground truth data including fresh and dry biomass, plant height, stem density, leaf area, specific leaf area, and moisture contents are also collected for each measurement. The temporal variations of the measured backscattering coefficients as well as the measured plant height, LAI (leaf area index) and biomass are analyzed. Then, the measured polarimetric backscattering coefficients are compared with the rice growth parameters. The measured plant height increases monotonically while the measured LAI increases only till the ripening period and decreases after the ripening period. The measured backscattering coefficientsare fitted with polynomial expressions as functions of growth age, plant LAI and plant height for each polarization, frequency, and incidence angle. As the incidence angle is bigger, correlations of L band signature to the rice growth was higher than that of C band signatures. It is found that the HH-polarized backscattering coefficients are more sensitive than the VV-polarized backscattering coefficients to growth age and other input parameters. It is necessary to divide the data according to the growth period which shows the qualitative changes of growth such as panicale initiation, flowering or heading to derive functions to estimate rice growth.

• Journal of Korean Classical Literature and Education
• /
• no.38
• /
• pp.201-238
• /
• 2018

As a way of enhancing the intercultural ability needed for diverse cultural eras, this study focuses on the "narration" of the Italian education scholar Maddalena De Carlo in order to determine the "diverse values" created by the "symbolic representation" based on the folktales narrated by immigrants living in Korea. Through this, it specifically presents educational elements and contents that can raise relative sensitivity. The authors of this paper have connected, empathized, and communicated with people of various cultures in order to go beyond Carlo's discussion. The paper discusses the expansion of cultural sensitivity as an element of education through narrative topics using the folktales of immigrant narrators in Korea. It also recognizes the limitations of a desire for a homogeneous union within an intercultural society and thus formulates educational contents for creating a relationship with heterogeneous ideas through the elimination of communication barriers through heterogeneity and a consideration of the surface and the back. This is systemized in six steps. Step 1: Listening to oral folktales of immigrants, Step 2: Finding heterogeneous motifs imprinted in the immigrants' memories, Step 3: Understanding the meaning of the opposing qualities symbolized by heterogeneous motifs, Step 4: Creating narrative topics containing the key motifs, Step 5: Generating the value of symbolic representation as a narrative topic, and Step 6: Expanding the value of life into a cultural symbol. In Chapter 3, this study focuses on educational contents using immigrants' folktales by applying these six steps. The class contents include the recognition of the limitations of desire for a homogeneous union within an intercultural society and the consideration of how to create a relationship with heterogeneous ideas through the elimination of communication barriers through heterogeneity and consideration of the surface and the back. This paper then compares the Indonesian folktale, The Inverted Ship Mountain and the Mom's Mountain, with the world-famous Oedipus myth, to determine what the symbolic representation of these heterogeneous motifs is. In Step 6, when the symbolic system is culturally extended, the incestuous desire that appears in the "inverted ship" is interpreted as a fixation that was created when the character sought to unite with homogenous idea. The Cambodian folktale, The Girl and the Tiger, is a story that is reminiscent of the Korean folktale, The Old Man with a Lump. Through the motif in "Tiger," this paper generates a narrative topic that will enhance the students' intercultural abilities by culturally expanding their skills in how to relate with a heterogeneous being that is usually represented as an animal. The Vietnamese folktale, The Coconut Bowl, similar to the Korean folktale, GureongDeongDeong SinSeonBi, is a story that draws a variety of considerations about the surface and theback, and it shows readers how to build a relationship with a heterogeneous idea and how to develop and grow with such a relationship. Thus, if a narrative topic is generated and readers are able to empathize using an opposing feature formed by the core motif of the folktale, it becomes possible, through immigrant folklore, to construct a possibility of a new life through the formation of a relationship with an unfamiliar and heterogeneous culture.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.989-998
• /
• 2021

In the utilization of optical satellite imagery, which is greatly affected by clouds, periodic composite technique is a useful method to minimize the influence of clouds. Recently, a technique for selecting the optimal pixel that is least affected by the cloud and shadow during a certain period by directly inputting cloud and cloud shadow information during period compositing has been proposed. Accurate extraction of clouds and cloud shadowsis essential in order to derive optimal composite results. Also, in the case of an surface targets where spectral information is important, such as crops, the loss of spectral information should be minimized during cloud-free compositing. In thisstudy, clouds using two spectral indicators (Haze Optimized Tranformation and MeanVis) were used to derive a detection technique with low loss ofspectral information while maintaining high detection accuracy of clouds and cloud shadowsfor cabbage fieldsin the highlands of Gangwon-do. These detection results were compared and analyzed with cloud and cloud shadow information provided by Sentinel-2A/B. As a result of analyzing data from 2019 to 2021, cloud information from Sentinel-2A/B satellites showed detection accuracy with an F1 value of 0.91, but bright artifacts were falsely detected as clouds. On the other hand, the cloud detection result obtained by applying the threshold (=0.05) to the HOT showed relatively low detection accuracy (F1=0.72), but the loss ofspectral information was minimized due to the small number of false positives. In the case of cloud shadows, only minimal shadows were detected in the Sentinel-2A/B additional layer, but when a threshold (= 0.015) was applied to MeanVis, cloud shadowsthat could be distinguished from the topographically generated shadows could be detected. By inputting spectral indicators-based cloud and shadow information,stable monthly cloud-free composited vegetation index results were obtained, and in the future, high-accuracy cloud information of Sentinel-2A/B will be input to periodic cloud-free composite for comparison.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.93-99
• /
• 2019

The purpose of this study was to investigate the bond strength between PEKK(Polyetherketoneketone) and Sinfony(3M ESPE, Seefeld, Germany) the dental composite resin by proposing the three representative surface treatment methods and evaluate to see if they affect the bond strength between two materials. A total of 30 PEKK($Pekkton^{(R)}$ Ivory, $Cendres+M{\acute{e}}taux$, Bienne, Switzerland) specimens were prepared, embedded in acrylic resin, polished(P 1200 grid) to surface, and each group was divided into 10 specimens. After then, by the surface treatment method, it classified into three groups(n=10) such as Air abrasion group(PN), applying Single Bond Universal(3M ESPE) after Air abrasion(PB), applying OPAQUE(3M ESPE) after Air abrasion(PO). Then, veneering was performed by using Sinfony(3M ESPE, Seefeld, Germany). All completed specimens were allowed to rest in a $37^{\circ}C$ water bath for 24 hours. Shear bond strength of each group was measured and fracture patterns were classified. Statistic analysis was performed with One-way ANOVA followed by post hoc Scheffe tast (p<.05). Statistical analysis was performed using the SPSSWIN 21.0 program. As a result of one-way ANOVA, the average value of PB group was $27.67{\pm}4,18MPa$ and it was shown as the highest bond strength, PN and PO were $20.43{\pm}1.70$ and $19.8{\pm}4.77MPa$ each, and these were relatively low(F=18.4, P<.001), and as the post-test the Scheffe test was conducted and verified (p<.05). After examining the scheffe test, it was showed significant differences as PB>PO, PB>PN(p<.001). Through this study, in order to enhance the bonding force between PEKK and the composite resin, perform the Air abrasion and surface treatment by using Single Bond Universal(3M ESPE) is recommended, and as coMPared with other studies. And it is assumed that the increase of the application time of the Air abrasion affects the increase of the shear bond strength. Thus, further research is required.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.1
• /
• pp.187-198
• /
• 2019

The purpose of this study is to seek ways of utilizing TLBMC by understanding business model of social ventures that are accompanied by social and environmental as well as economic missions. In order to achieve this, business models from economic, environmental and social perspectives will be analyzed, and we seek to enhance sustainability of social venture entrepreneurs. As the analysis tool, TLBMC(Triple Layered Business Model Canvas) expands upon the business model canvas that is widely utilized and recognizes economical terms. The TLBMC is proposed by Joyce, A., & Paquin, R. L.(2016) to help achieve a holistic view with horizontal and vertical associations. The study tries to overcome limitations of previous studies and observe a variety of economic, environmental, and social perspectives that social ventures should have with the TLBMC. As a result, it has the following implications; Firstly, creating separate social, environmental and economic business model canvas helps a business to have a holistic approach. Secondly, it was found that social venture characteristics of environmental and social perspectives were applied in practice. Lastly, we have established experience data on social venture business model. This study focuses on the opinions, the meanings and the subjective views of the participants. As a result, conclusions are drawn by the researchers ' assertions and has limitations as a research on case studies. However, this study will help people who are preparing or studying social ventures to have economic, environmental, and social perspectives. Also, redefinition of the direction and value of entrepreneurs operating social ventures, such as vision and mission, will help clarify the roles and responsibility of organizations. As a fundamental step for future empirical studies, this study could be the base for social venture business model studies.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2019

Purpose: The aim of this study was to evaluate the influence of polishing methods on the color stability of composite resins. Materials and Methods: Two bulk-fill and four conventional resin composites were filled in cylindrical molds (6 mm diameter, 4 mm height) and light-cured. The specimens were stored in $34^{\circ}C$ distilled water for 24 h. Spectrophotometer was used to determine the color value according to the CIE $L^*a^*b^*$ color space. Each group was divided into three groups according to polishing methods (n = 5). Group 1 was control group (Mylar strip group), group 2 was polished with PoGo, and group 3 was polished with Sof-Lex Spiral wheels. Color evaluation was performed weekly for 4 weeks after immersion in $34^{\circ}C$ distilled water. The results were analyzed by generalized least squares method (P < 0.05). Results: Generalized least squares analysis revealed that Sof-Lex Spiral wheels group showed the significantly lower ${\Delta}E$ values compared to PoGo and control group (P < 0.05). The ${\Delta}E$ values of polished group showed the significantly lower than the ${\Delta}E$ values of unpolished group (P < 0.05). Regarding color changes of composite resins, there was no significant difference between the ${\Delta}E$ values of Filtek Z250 and Filtek Z350 XT Universal restorative in all time intervals (P < 0.05). Tetric N-Ceram Bulk Fill showed the significantly lower ${\Delta}E$ values compared to other composite resins in 1, 2, 3 weeks (P < 0.05). Conclusion: Within the limitations of this study, polishing methods influence the color stabilities of composite resins. The group polished with Sof-Lex Spiral Wheels showed more resistance to discoloration than group polished with PoGo.

• Membrane Journal
• /
• v.28 no.6
• /
• pp.432-443
• /
• 2018

In this study, propylene/propane separation behavior of Na-type faujasite zeolite membranes is predicted by observing gravimetric adsorptions of propylene and propane on zeolite 13X. The gravimetric adsorptions were measured by using a magnetic suspension balance (MSB) at temperatures of 323, 343, 363 K and a pressure range of 0.02-1 bar. The pressure was increased at 0.1 bar intervals. As adsorption temperature increased, adsorptions of propylene and propane decreased and propylene/propane adsorption selectivity increased. Also, the diffusion coefficients of propylene and propane were increased as the adsorption temperature increased, following the Arrhenius equation. The maximum propylene/propane diffusion selectivity was 0.9753 at 323 K. The perm-selectivity was calculated from the adsorption data of zeolite 13X and compared with the perm-selectivity measured in the single gas permeation experiment for the Na-type faujasite zeolite membrane. The maximum values for the calculated and measured perm-selectivities were observed at a temperature of 323 K. It could be concluded that the prediction of propylene/propane separation of surface diffusion-based membrane by using gravimetric adsorption data is reasonable. Therefore, it is expected that this prediction method can be applied to the screening of adsorption-based microporous membrane for propylene/propane separation.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.578-586
• /
• 2019

The purpose of this study was to investigate the change of spatial distribution of Korean red pine (Pinus densiflora Siebold & Zucc.) in Hallasan National Park by surveying the distribution and crown density and analyzing by the elevation, slope, orientation, and regional habitat in 2006 and 2015. The total area of the Korean red pine forest was 1,259.9 ha in 2015, which increased by 51.4 ha, or 4.1%, compared to 1,208.5 ha in 2006. For the past 10 years, the area of sparse density with crown density of 11% to 40% of Korean red pine increased by 59.8 ha, the area of moderate density with crown density of 41% to 70% increased by 59.0 ha, and the area of dense density with 71% or more crown density increased by 67.3 ha. In terms of the altitude above sea level, the Korean red pine forest area between 1,010 m and 1,400 m was the largest at 1,003.0 ha or 79.6% of the total area in 2015. The area between 1,100 m and 1,300 m increased, and the area of dense density decreased significantly while the areas of moderate density and sparse density increase. There was no notable change according to the land slope, and the area increased from 2006 regardless of the slope. By direction, 56.4% were distributed in the southwest and southeast directions centered on the south-facing slope with the increase of 27.8 ha over the 10 years while the northwest and northeast directions centered on the north-facing slope decreased by 7.6 ha. Regarding the distribution change of the Korean red pine forest by the region, the Yeongsil area showed an increase of 25.5 ha, or 49.6% of the total area increase, in 2006 while the Ibseog-oreum area including the right side on the Sanbeoleum mountain valley increased by 20.4 ha. The distribution in the Gaemideung area that includes Jogeundeule increased by 7.4 ha while that of Sogbat in Sungpanak Trail decreased by 1.9 ha. This study analyzed the changes in the distribution area and crown density of the Korean red pine forest according to the altitude, slope, direction, and regional habitat in Hallasan National Park. The expansion of Korean red pine forest distribution was limited to the areas where the grass and the shrub was the dominating vegetation structure, or the forest gap was created by the disturbance. On the other hand, the distribution area of the Korean red pine forest surrounded by deciduous broad-leaved forests or mixed vegetation structure is considered to result from the change in density more than the area due to competition with deciduous broad-leaved trees.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.293-301
• /
• 2019

The experiment was conducted to determine the performance of DME combustion gas when used as a fuel for DME burner for raising temperature and $CO_2$ concentration in greenhouse and also to examine its effects on chlorophyll content, and fresh and dry weight of lettuce and Chinese cabbage. DME-1 and DME-2 treatments consisted of average DME flow quantity in duct were $17.4m^3min^{-1}$ and $10.2m^3min^{-1}$ respectively to greenhouse-1 and greenhouse-2 and no DME gas was supplied to greenhouse-3 which was left as control (DME-3). DME supply times were $0.5hr\;day^{-1}$, $1hr\;day^{-1}$, $1:30hrs\;day^{-1}$ and $2hrs\;day^{-1}$ on week 1, 2, 3, and 4 respectively. Chlorophyll content and fresh and dry weight of lettuce and Chinese cabbage were measured for each treatment and analyzed through analysis of variance with a significance level of P<0.05. The result of the study showed that $CO_2$ concentration increased up to 265% and 174% and the level of temperature elevated $4.8^{\circ}C$ and $3.1^{\circ}C$ in greenhouse-1 and 2, respectively as compared to greenhouse-3 due to application of DME combustion gas. Although, the same crop management practices were provided in greenhouse-1, 2 and 3 at a same rate, the highest change (p<0.05) of chlorophyll content, fresh weight and dry weight were found from the DME-1 treatment, followed by DME-2. As a result, DME combustion gas that raised the level of temperature and $CO_2$ concentration in the greenhouse-1 and greenhouse-2, might have an effect on growth of lettuce and Chinese cabbage. At end of experiment, the highest fresh and dry weight of lettuce and Chinese cabbage were measured in greenhouse-1 and followed by greenhouse-2. Similarly chlorophyll content of greenhouse-1 and greenhouse-2 were more compared to greenhouse-3. In general, DME was not producing any harmful gas during its combustion period, therefore it can be used as an alternative to conventional fuel such as diesel and liquefied petroleum gas (LPG) for both heating and $CO_2$ supply in winter season. Moreover, endorsed quantify of DME combustion gas for a specified crop can be applied to greenhouse to improve the plant growth and enhance yield.