• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.116-124
• /
• 2012

In this paper, we propose an efficient lighting control system design for AVR based LSDM control. This paper, an efficient lighting control system design for LSDM control be design divided as the signal control part for I/O data bus and the timer/counter part for clock signal control according to operating conditions. LSDM control logic be optimization to PORTx and DDRx register by specifying the logical value of each bit for effective control signal processing. And, the LSDM control signal by lighting control program execution of ATmega128 be designed to be LSDM lighting control by control logic operating. In this paper, a proposed lighting control system were measured to power loss rate to proved the power loss reduction about lighting status of LSDM control logic by download the lighting control program to system through serial from host PC. As a measurement result, a proposed lighting control system than the existing lighting control system were proved to be effective to the overall power consumption reduction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.5A
• /
• pp.879-888
• /
• 2001

본 논문에서는 무선 LAN의 MAC 계층 프로토콜을 고속으로 처리하는 MAC 기능 칩을 개발하였다. 개발된 MAC 칩은 CPU와의 인터페이스를 위한 제어 레지스터들과 인터럽트 체계를 가지고 있으며, 프레임 단위로 송수신 데이터를 처리한다. 또한 PFDM 방식 물리계층 모뎀을 위한 직렬전송 인터페이스를 가지고 있다. 개발된 MAC 칩은 크게 프로토콜제어기능 블록, 송신기능 블록 및 수신기능 블록 등으로 구성되었으며, IEEE 802.11 규격에 제시된 대부분의 DCF 기능을 지원한다. 구현된 MAC 칩의 동작을 검증하기 위해 RTS-CTS 절차 기능, IFS(Inter Frame Space) 기능, 액세스 절차, 백오프 절차, 재전송 기능, 분할된(fragmented) 프레임 송수신 기능, 중복수신 프레임 검출 기능, 가상 캐리어 검출기능(NAV 기능), 수신에러 발생 경우 처리 기능, Broadcast 프레임 송수신 기능, Beacon 프레임 송수신 기능, 송수신 FIFO 동작 기능 등을 시뮬레이션을 통해 시험하였으며, 시험 결과 모두 정상적으로 동작함을 확인하였다. 본 논문을 통해 개발된 MAC 기능 칩을 이용할 경우 고속 무선 LAN 시스템의 CPU 부하(load)와 펌웨어의 크기를 크게 줄일 수 있을 것으로 기대된다.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.19-27
• /
• 1998

The digital system is consisted of control subsystem and data subsystem. On this Thesis, after defining the hardware description languages and hardware compiler based on this, We have designed the tools which created data and state table using of register transfer algorithm. As a major language selected C and then as subtools, developed all these making use of Lex and YACC of Unix.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.129-132
• /
• 2000

버퍼넘침(buffer overflow)은 특정 프로그램 언어에서 발생하는 배열의 경계파괴 현상을 말한다. 그 대표적인 언어로서 C/C++을 들 수 있는데. 이들 언어는 기본적으로 스트링(문자열)을 정의함에 있어서 크기속성을 배제하고 끝을 의미하는 종료문자(delimiter character. NULL)를 사용함으로써 배열(버퍼)의 경계침범 가능성을 허용하고 있다. 이 때 스택영역에 할당된 버퍼가 넘친다면, 주변에 위치한 지역변수, 레지스터 보관, 복귀주소 둥의 값이 변질되어 원래의 의도된 제어흐름을 보장할 수 없게 된다. 특히 복귀주소 부분을 의도적으로 침범하여 특정 값을 덮어쓸 수 있다면 해당 프로그램의 동작을 인위적으로, 그리고 자유롭게 변경할 수 있게 된다. 본 논문에서는 이와 같은 스택영역에서의 버퍼넘침을 사용한 제어흐름 변경 해킹기법의 과정을 현존하는 UNIX 시스템 및 C/C++ 언어를 이용하여 살펴보고 대응방향을 모색한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10a
• /
• pp.653-655
• /
• 2000

버퍼넘침(buffer overflow)은 특정 프로그램 언어에서 발생하는 배열의 경계파괴 현상을 말한다. 그 대표적인 언어로서 C/C++을 들 수 있는데, 이들 언어는 기본적으로 스트링(문자열)을 정의함에 있어서 크기속성을 배제하고 끝을 의미하는 종료문자(delimiter character, NULL)을 사용함으로써 배열(버퍼)의 경계침범 가능성을 허용하고 있다. 이때 스택영역에 할당된 버퍼가 넘침다면, 주변에 위치한 지역변수, 레지스터 보관, 복귀주소 등의 값이 변질되어 원래의 의도된 제어흐름을 보장할 수 없게 된다. 특히 복귀주소 부분을 의도적으로 침범하여 특정 값을 덮어쓸 수 있다면 해당 프로그램의 동작을 인위적으로, 그리고 자유롭게 변경할 수 있게 된다. 본 논문에서는 이와 같은 스택영역에서의 버퍼넘침을 사용한 제어흐름 변경 해킹기법의 과정을 현존하는 UNIX 시스템 및 C/C++ 언어를 이용하여 살펴보고 대응방향을 모색한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1245-1251
• /
• 1999

A 1.25Gb/s path control switch chip has been designed and implemented with COMPASS tool and 0.8${\mu}{\textrm}{m}$ CMOS gate-array of LG semiconductor. This device controls the path of digital singnals in SDH-based transmission system. The proposed switch chip is suitable for self-healing operations both in a linear network and an unidirectonal ring, The self-healing operation of the switch is effectively done by the configuration information stored in the resisters of the switch. The test device adapted to SDH-based transmission system, show immediate restoration and a 10-11~10-12 bit error raito. And 2.5Gb/s or more high throughput can be realized by combining rwo identical or more switches with the parallel architecture.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.754-757
• /
• 2007

This paper presents automatic LCD gamma control system using gamma curve optimization. It controls automatically gamma adjustment registers in mobile LCD driver IC to reduce average gamma error and adjusting time. The proposed gamma system contains module-under-test (MUT, LCD module), PC installed with program, multimedia display tester for measuring luminance, and control board for interface between PC and LCD module. We have developed a new algorithm using 6-point programmable matching technique with reference gamma curve. Developed algorithm and program are generally applicable for most of the LCD modules.

• Journal of Digital Contents Society
• /
• v.17 no.3
• /
• pp.173-180
• /
• 2016

In this paper, a design of transceiver module for real-time wire and wireless robust integrated security system to solve the problem of conventional security system and its transceiver module is proposed. The presented robust integrated security system is designed with RF control unit and wireless transceiver module. A RF controller in transceiver module works as a low-power RF transceiver system. It is designed to use specific bandwidth stored in registers and manipulate RF power of transceiver by accessing the random values of registers. Operation algorithm for RF transceiver module is also presented. The designed transceiver module and the operation algorithm are implemented and verified by experiments.

• Journal of Internet of Things and Convergence
• /
• v.6 no.1
• /
• pp.97-102
• /
• 2020

Multi-Channel Switch ICs for IoT have integrated several solid state structure low ON-resistance bi-directional relay MOS switches with level shifter to drive high voltage and they should be independently controlled by external serialized logic control. These devices are designed for using in applications requiring high-voltage switching control by low-voltage control signals, such as medical ultra-sound imaging, ink-jet printer control, bare board open/short and leakage test system using Kelvin 4-terminal measurement method. This paper describes implementation of analog switch control block and its verification using Field programmable Gate Array (FPGA) test pattern generation. Each block has been implemented using Verilog hardware description language then simulated by Modelsim and prototyped in a FPGA board. Compare to conventional IC, The proposed architecture can be applied to fields where multiple entities need to be controlled simultaneously in the IoT environment and the proposed pattern generation method can be applied to test similar types of ICs.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.1
• /
• pp.17-28
• /
• 2010

This paper presents a new automatic TFT-LCD image quality optimization system using DSP for the first time. Since conventional manual method depends on experiences of LCD module developers, it is highly labor-intensive and requires several correction steps providing large gamma correction error. The proposed system optimizes automatically gamma adjustment and power setting registers in mobile TFT-LCD driver IC to reduce gamma correction error, adjusting time, and flicker. It contains module-under-test (MUT, TFT-LCD module), PC installed with program, multimedia display tester for measuring luminance and flicker, and control board for interface between PC and TFT-LCD module. We have developed a new algorithm using 6-point programmable matching technique with reference gamma curve and applying automatic power setting sequence. Developed algorithm and program are generally applicable for most of the TFT-LCD modules. It is realized to calibrate gamma values of 1.8, 2.0, 2.2 and 3.0, and reduce flicker level. The control board is designed with DSP and FPGA, and it supports various interfaces such as RGB and CPU. Developed automatic image quality optimization system showed significantly reduced gamma adjusting time, reduced flicker, and much less average gamma error than conventional manual method. We believe that the proposed system is very useful to provide high-quality TFT-LCD and to improve developing process using optimized gamma-curve setting and automatic power setting.