• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.251-259
• /
• 1998

The motion of an aircraft landing gear over rough runway at variable speed is nonstationary. In this paper, a method for the computation of nonstationary response variance is presented which uses a state space form for the combination of landing gear and runway excitation. The dynamic characteristics of the landing gear under nonstationary random excitations has also been analyzed using the proposed method. The formulation is for linear systems of arbitrary order and allows any deterministic velocity history. It has been found by a series of simulation that correlation parameter, damping coefficients of landing gear and tire, and velocity profiles play a prominent role on the dynamic characteristics.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.210-212
• /
• 1996

Random drift rate (i.e., random drift in angle rate) of a gyro represents the major error source of inertial navigation systems that are required to operate over long time intervals. It is uncorrectable and leads to an increase in the error with the passage of time. In this paper a technique is presented for analyzing random process from experimental data and the results are presented. The problem of estimating the a priori statistics of a random process is considered using time averages of experimental data. Time averages are calculated and used in the optimal data-processing techniques to determine the statistics of the random process. Therefore the contribution each component to the gyro drift process can be quantitatively measured by its statistics. The above techniques will be applied to actual gyro drift rate data with satisfactory results.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.91-98
• /
• 2016

In order to apply Kriging methods for geostatistics of spatial data, an estimation of spatial coherency functions is required priorly based on the spatial distance between measurement points. In the study, the typical coherency functions, such as semi-variogram, homeogram, and covariance function, were estimated using the national geoid model. The test area consisting of 2°×2° and the Unified Control Points (UCPs) within the area were chosen as sampling measurements of the geoid. Based on the distance between the control points, a total of 100 sampling points were grouped into distinct pairs and assigned into a bin. Empirical values, which were calculated with each of the spatial coherency functions, resulted out as a wave model of a semi-variogram for the best quality of fit. Both of homeogram and covariance functions were better fitted into the exponential model. In the future, the methods of various Kriging and the functions of estimated spatial coherency need to be studied to verify the prediction accuracy and to calculate the Mean Squared Prediction Error (MSPE).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.270-270
• /
• 2023

습지 생태계는 복잡한 물리적 생지화학적 프로세스의 상호작용이 있으나, 습지 생태계의 건강성 회복을 위한 첫 번째 단계는 습지 생태계에서의 물순환에 대한 정확한 이해일 것이다. 또한 지역적인 물 균형 및 생태계 보전에서 습지를 활용하기 위해서도 습지 물순환에 대한 정량적인 이해는 필수적이다. 그러나, 습지 물순환의 이해를 위해 필수적인 관측 자료들은 현장 측정으로 획득하기 어려운 자료이거나 비용적인 문제로 인하여 관측이 어려운 실정이다. 이에 본 연구에서는 Sentinel-2 위성 자료를 활용하여 습지의 유입량을 추정하기 위한 절차를 제시하고자 한다. 이를 위해 한반도 동남부의 낙동강에 위치한 주요 다목적댐의 자료를 활용한 분류 기반의 인공지능 모델이 설계된다. 인공지능의 학습을 위한 입력자료는 아래와 같은 절차에 의해 만들어진다. 1) 다목적댐의 수위-물 체적 관계를 이용하여 수위-수표면적 관계 곡선 도출. 2) 수위-수표면적 관계 곡선과 DEM을 활용하여 물과 육지 영역을 구분하는 식별자를 도출. 3) Sentinel-2 위성 정보와 물-육지 식별자를 비교하는 랜덤 포레스트 모델을 설계. 4) 위성 정보의 물-육지 정보로부터 미계측 습지 지역의 물과 육지를 식별할 수 있는 식별자 도출. 이러한 과정을 경유하여 추정된 습지의 수표면적과 습지 지역의 DEM을 결합함으로써 습지의 수위-수표면적-물 체적 관계 곡선이 산정되어, 최종적으로 습지의 유입량이 모의된다. 모의된 습지 유입량은 다양한 수문 모델의 매개변수를 추정하는데 활용될 수 있을 것이며, 검증된 수문 모델을 활용하여 습지의 물순환의 이해도를 증진시킬 수 있을 것으로 기대된다.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.3
• /
• pp.51-55
• /
• 2020

In this paper, an improved FAM is proposed by adopting similarity learning in the existing FAM (Fuzzy Associative Memory) used in image restoration. Image restoration refers to the recovery of the latent clean image from its noise-corrupted version. In serious application like face recognition, this process should be noise-tolerant, robust, fast, and scalable. The existing FAM is a simple single layered neural network that can be applied to this domain with its robust fuzzy control but has low capacity problem in real world applications. That similarity measure is implied to the connection strength of the FAM structure to minimize the root mean square error between the recovered and the original image. The efficacy of the proposed algorithm is verified with significant low error magnitude from random noise in our experiment.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.5
• /
• pp.43-47
• /
• 1982

In this paper, we derived to anlyze the correlation between the peak sidelobe of the linear isotropic random array and the design parameters, such as the element numbers, wavelength, scanning angle, confidence level and the length of aperture, with the statistical theory of random processes. The Peak sidelobe estimator was tested by the computer simulations using Honte Carlo method. Consequently, it was evident that the results of the peak lidelobe estimator were consistent with those of the computer simulations over confidence level 0.7.

• Electronics and Telecommunications Trends
• /
• v.18 no.5 s.83
• /
• pp.63-72
• /
• 2003

소프트웨어의 신뢰성을 정량적으로 평가하는 데 있어서 소프트웨어 개발 프로세스의 시험단계나 사용자의 운용단계에 처한 동적 환경상태에서 소프트웨어 고장발생기능 현상을 기술한 소프트웨어 신뢰도성장모델을 많이 제안하고 있다. 대다수의 모델이 발생된 소프트웨어 고장의 발생원인에 대한 완전한 수정을 요구하는 완전 디버깅 환경을 가정하고 있다. 그러나 실제 개발자가 디버깅 작업을 수행할 때 완전한 수정이 불가능하기 때문이다. 다시 말해서 여러 소프트웨어 개발자가 경험한 이러한 디버깅 작업을 행하는 경우에는 결함을 제거하는 데 한계가 있기 때문에 수정 작업시 새로운 결함이 삽입되는 경우가 많다. 즉, 결함 수정은 불완전 환경에 처한다. 본 논문에서는 결함 수정시 신규 결함의 삽입 가능성을 고려하고 불완전 디버깅 환경에 대한 소프트웨어 신뢰도 성장모델을 제안한다. 소프트웨어 동작 환경 하에서 발생된 소프트웨어 고장과 시험 전 소프트웨어 내의 고유 결함에 의한 고장과 동작중에 랜덤하게 삽입된 결함에 의해 발생되는 고장 등 2종류의 결함을 고려하여 비동차 포아송과정(NHPP)에 의한 소프트웨어 고장발생 현상을 기술한다. 또한 소프트웨어 신뢰성 평가에 유용한 정량적인 척도를 도출하고 실측 데이터를 이용하여 적용한 결과를 제시하고 기존의 모델과의 적합성을 비교, 분석한다.

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.323-331
• /
• 2017

In this paper, four types of deposition control processes such as temperature, pressure, input/output(I/O), and gas were replaced by the Internet of Things(IoT) to analyze the data load and sequence procedure before and after the application of it. Through this analysis, we designed the load balancing in the sensing area of the deposition process by creating the sequence diagram of the deposition process. In order to do this, we were modeling of the sensor I/O according to the arrival process and derived the result of measuring the load of CPU and memory. As a result, it was confirmed that the reliability on the deposition processes were improved through performing some functions of the equipment controllers by the IoT. As confirmed through this paper, by applying the IoT to the deposition process, it is expected that the stability of the equipment will be improved by minimizing the load on the equipment controller even when the equipment is expanded.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.17-23
• /
• 2004

The mobile radio channel can be simulated as a complex-valued random process with narrow-band spectrum. This paper describes a real-time implementation of that process using a INS320C6414 digital signal processor and XC2VP30 Virtex FPGA. The simulator presented here is not only a comprehensive model of the flat fading but also frequency selective fading mobile channel conditions. To replicate the statistical characteristics of the multipath fading environment with the minimum computational burden, multi-rate techniques are employed to resolve practical problems such as variable sampling rate. The simulator produces accurate and consistent results due to digital implementation. It is very flexible and simple to program for various field conditions in mobile communications with a graphical user interface.

• Spatial Information Research
• /
• v.11 no.3
• /
• pp.227-240
• /
• 2003

The primary focus of this study is to provide a general methodology which can be utilized to understand and analyze environmental issues such as long term ecosystem dynamics and land use/cover change by development of 2D dynamic landscape models and model-based simulation. Change processes in land cover and ecosystem function can be understood in terms of the spatial and temporal distribution of land cover resources. In development of a system to understand major processes of change and obtain predictive information, first of all, spatial heterogeneity is to be taken into account because landscape spatial pattern affects on land cover change and interaction between different land cover types. Therefore, the relationship between pattern and processes is to be included in the research. Landscape modeling requires different approach depending on the definition, assumption, and rules employed for mechanism behind the processes such as spatial event process, land degradation, deforestration, desertification, and change in an urban environment. The rule-based models are described in the paper for land cover change by natural fires. Finally, a case study is presented as an example using spatial modeling and simulation to study and synthesize patterns and processes at different scales ranging from fine-scale to global scale.