• Korean Journal of Remote Sensing
• /
• v.32 no.2
• /
• pp.97-104
• /
• 2016

We present linear particle depolarization ratio at 440, 675, 870, and 1020 nm retrieved from measurements with an AERONET sun/sky radiometer at Osaka, Japan. The retrieved data were compared with lidar derived linear particle depolarization ratio at 532 nm at the same site. We find good agreement between linear particle depolarization ratios derived with Sun photometer and measured by lidar except for those at 440 nm. The coefficients of determination between lidar derived data and sun/sky radiometer derived data were 0.28, 0.81, 0.88, and 0.89 at 440, 675, 870, and 1020 nm, respectively. We find that the linear particle depolarization ratio derived with sun/sky radiometer varies by the mixing between Asian dust and pollution particles. As the mixing ratio of Asian dust and pollution particles is increased, the linear particle depolarization ratio values are lower than the values of pure Asian dust. It was confirmed by the value of single-scattering albedo and particle size distribution.

• 전자공학회논문지 IE
• /
• v.46 no.1
• /
• pp.7-15
• /
• 2009

In this paper, automatic structure boundary extraction is proposed using terrestrial LIDAR (Light Detection And Ranging) in 3-dimensional data. This paper describes an algorithm which does not use pictures and pre-processing. In this algorithm, an efficient decimation method is proposed, considering the size of object, the amount of LIDAR data, etc. From these decimated data, object points and non-object points are distinguished using distance information which is a major features of LIDAR. After that, large and small values are extracted using local variations, which can be candidate for boundary. Finally, a boundary line is drawn based on the boundary point candidates. In this way, the approximate boundary of the object is extracted.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.3
• /
• pp.49-56
• /
• 2009

Recently, a generation of high quality mosaic images from video sequences has been attempted by a variety of investigations. Among the matter of investigation, in this paper, generation on stereo mosaic utilizing airborne-video sequence images is focused upon. The stereo mosaic is made by creating left and right mosaic which are fabricated by front and rear slices having different viewing angle in consecutive video frames. For making the stereo mosaic, motion parameters which are able to define geometric relationship between consecutive video frames are determined. For determining motion parameters, affine model which is able to explain relative motion parameters is applied by this paper. The mosaicing method using relative motion parameters is called by free mosaic. The free mosaic proposed in this paper consists of 4 step processes: image registration with reference to first frame using affine model, front and rear slicing, stitching line definition and image mosaicing. As the result of experiment, the left and right mosaic image, anaglyphic image for stereo mosaic images are showed and analyzed y-parallax for checking accuracy.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.2
• /
• pp.45-53
• /
• 2012

This paper derives Isogeometric analysis and post-processing method of surface that are generated by NURBS basis function for accurate geometric modeling and structure analysis of free-form. By deforming these parameters that are consisted of control points, knots, polynomial, variable geometric models are derived. The basis function that is used to Isogeometric analysis is same to the basis function of NURBS that is used to generate geometric models. For performing isogeometric analysis, h-p-k refinement is performed without changing of original geometry. To visualize the results of isogeometric analysis that control points' displacements, post-processing method that is the interface method between IGES format and Rhinoceros is derived.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.11
• /
• pp.69-78
• /
• 2019

The purpose of this study is to propose a modeling methodology through the exchange of coordinate data of a three-dimensional custom curtain wall panel between Rhino and Revit, and to examine the validity of the model implemented in the drawing. Although the modeling means and method are different, a fundamental principle is that all three-dimensional modeling begins by defining the position of the points, the most primitive element of geometry, in the XYZ coordinate space. For the BIM modeling methodology proposal based on this geometry basic concept, the functions and characteristics associated with the points of Rhino and Revit programs are identified, and then BIM implementation process model is organized and systemized through the setting of the interoperability process algorithm. The BIM implementation process model proposed in this study is (1) Modeling and panelizing surface into individual panels using Rhino and Grasshopper; (2) Extraction of vertex coordinate data from individual panels and create CSV file; (3) Curtain wall modeling through Adaptive Component Family in Revit and (4) Automatic creation of Revit curtain wall panels through API. The proposed process model is expected to help reduce design errors and improve component and construction quality by automatically converting general elements into architectural meaningful information, automating a set of processes that build them into BIM data, and enabling consistent and integrated design management.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.30 no.4
• /
• pp.317-324
• /
• 2010

Recently, fallow paddy land located in the mid-mountain area (FPL) due to a decrease in rice consumption has increased in some regions of our country. So, grasses and forage crops available for years in once sowing should be introduced in FPL. This study was conducted to develop the technique for cultivation of grasses and forage crops using animal manure in FPL The field experiments were carried out from 2007 to 2009 on FPL at Kumsan, Chungbuk province in Korea. Cattle feedlot manure (CFM) was prepared by mixing feces and urine of cattle with rice straw in cattle feedlot for 6 months. The experimental plots were consisted of four treatments; tall fescue-based mixed pasture applied with chemical fertilizer (Control), mono-tall fescue pasture (MTFP), tall fescue-based mixed pasture (TFBMP), mono-Perennial ryegrass (MPR-FCM), mono-Italian ryegrass (MIR-FCM), mono-Red clover (MRC-FCM) and mono-Reed canarygrass (MRCG-FCM) applied with FCM. The field of tall fescue-based pasture had been sown with a grasses mixture containing 'Fawn' tall fescue, 'potomac' orchardgrass, 'Reveille' Perennial ryegrass, and 'kenblue' Kentuky bluegrass, 'Kenland' Red clover. Seeding rates were 16, 6, 4, 2 and $2\;ha^{-1}$, respectively. DM yields of forages and rates of grass coverage was higher in MTFP, TFBMP and MRCG-FCM as compated with control treatment. This result means that FPL has contained with favorable conditions for growing grass, because forage productivity is more than 15 tons per ha per year in fallow paddy land. In addition, the farmer can save the trouble of repeated plowing and sowing every year, due to the introduction of perennial grasses. The farmer must conduct the re-seeding and induce the improvement of management methods for the elevation of the persistence of red clover and perennial ryegrass, because both red clover and perennial ryegrass having high nutritive value and palatability was less persistent. Therefore, we suggest that FPL may be the good land for forage production utilizing FCM and FCM can be applied on FPL without any negative effects on DM production and the property of soil. FPL of Korea can be better utilized by applying FCM to the mono and/or mixed swards.

• Korean Journal of Social Welfare
• /
• v.54
• /
• pp.273-294
• /
• 2003

The outcome of study has shown that team approach in case management in the community welfare center has shown a fair amount of effectiveness in increasing the quality of life for the elderly. 30 elderly people who had complex difficulties in life were selected and given case management for a 6 month period. The student volunteers supervised by a case manager visited the clients once a week and arranged a series of community resources following assessment of the clients' needs. A group of professionals active in the community was invited for supervision. Compared to the clients in the comparison group, those clients who case management showed the increase in the quality of life and life satisfaction scale. The results of the study suggest that face-to-face service for the elderly is one important factor for successful case management intervention. Also, a team approach in case management utilizing professionals and volunteers can be useful for the case manager in the community welfare center who is overwhelmed with too many case loads.

• The Korean Journal of Pesticide Science
• /
• v.10 no.3
• /
• pp.165-171
• /
• 2006

A new 3-amino-1,3-thiazoline chemical library was synthesized through parallel synthetic technology and in vivo antifungal activity of the compounds were investigated against the typical 6 plant diseases (100 ppm). The characteristic feature of these derivatives was that both a benzyl moiety in C-2 imino and an amino group in C-3 of 2-imino-1,3-thiazoline scaffold were substituted in the molecule respectively. Some compounds showed antifungal activity with selectivity against tomato late blight and rice blast. The fungitoxicity would be attributed to 3,4-dichlorophenyl moiety of the benzyl group.

• Korean Journal of Remote Sensing
• /
• v.30 no.5
• /
• pp.597-605
• /
• 2014

The continuous observations for atmospheric aerosols were conducted during 3 years (2009 to 2011) by using Gwangju Institute of Science and Technology (GIST) multi-wavelength Raman lidar at Gwangju, Korea ($35.10^{\circ}N$, $126.53^{\circ}E$). The aerosol depolarization ratios calculated from lidar data were used to identify the Asian dust layer. The optical properties of Asian dust layer were different according to its vertical distribution. In order to investigate the difference between the optical properties of each individual dust layers, the transport pathway and the transport altitude of Asian dust were analyzed by Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model. We consider that the variation of optical properties were influenced not only their transport pathway but also their transport height when it passed over anthropogenic pollution source regions in China. The lower particle depolarization ratio values of $0.12{\pm}0.01$, higher lidar ratio of $67{\pm}9sr$ and $68{\pm}9sr$ at 355 nm and 532 nm, respectively, and higher ${\AA}ngstr\ddot{o}m$ exponent of $1.05{\pm}0.57$ which are considered as the optical properties of pollution were found. In contrast with this, the higher particle depolarization ratio values of $0.21{\pm}0.09$, lower lidar ratio of $48{\pm}5sr$ and $46{\pm}4sr$ at 355 nm and 532 nm, respectively, and lower ${\AA}ngstr\ddot{o}m$ exponent of $0.57{\pm}0.24$ which are considered as the optical properties of dust were found. We found that the degree of mixing of anthropogenic pollutant aerosols in mixed Asian dust govern the variation of optical properties of Asian dust and it depends on their altitude when it passed over the polluted regions over China.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.209-214
• /
• 2010

In this paper, We analyzes the image along the platform (Open Eye), through prevention of dementia or stroke patients and cognitive rehabilitation for the proposed system. This way through the camera image according to user's movement gained OpenCV image processing library, which is based on motion analysis, a part of this rehabilitation is to apply to cognitive rehabilitation. Therefore, this paper proposes a new image analysis system has been exposed to the elderly or stroke patients with dementia, their hand gestures through which patients can detect the image of the cognitive rehabilitation to help them in the analysis of the image analysis system is proposed.