• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.833-838
• /
• 2011

RFID system in manufacturing industry is used to collect, categorize, and process the data of products. To install RFID system for a large factory, a large amount of wired data communication network is necessary for RS232 communication. If the installed location of RFID system in the factory is changed or extended, a reinstallment is required for the already installed wired data network. A large amount of time/financial reinvestment is necessary for such reinstallation. By using wireless data communication network, however, the initial installation and reinstallation are very simple. In this paper, we implemented a wireless communication system and RFID system. We used the CC1020 chip for wireless communication system and EM4095 chip for RFID system. CC1020 chip enables highly-reliable data communication, and by setting a simple status register, it can switch between transmitting/receiving status and it can choose the desired frequency of either 400 MHz or 900 MHz. Also, Communication range is 50 m, if external antenna is used. EM4095 is a chip for RFID reader system with the carrier frequency of 125 KHz. This chip can implement the reader system by connecting a small number of components. And EM4100 was used for RFID system. EM4100 is read-only type. Atmega128 is used to control a wireless communication system and RFID system. We confirm that the system can communicate without error up to 50 m from sender. In the paper, the circuit diagram and operation program for CC1020 and RFID system are presented. The system used in the experiment is shown in pictures, and the data movement pattern of CC1020 is shown in the diagram, and the performance of each transmission method is presented.

• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.129-137
• /
• 2009

While the broadband network and multimedia technologies have been developing, the commercial market of digital contents also has been widely spreading with recently starting IPTV. As the IPTV services are getting to be generalized and popularized, the contents protection and authentication system tends to draw more attentions. So we need a system that can protect contents and allow only authenticated person to use right service by controling user authority and using content encryption. Until now, the conventional protection and authentication system is taking advantages of merits both in CAS and DRM. But the weak point of this system are in high costs, complexity and using HW. For resolving these problems, in this paper, we proposed IPTV contents protection and authentication system using OTP. When we transmit the content encrypted by OTP key using contents delivery technology, we operate XOR with contents using another settop-box's OTP key which was transmitted from distribution server. And contents are reconstructed and transmitted to the settop-box, In the end, downloaded content are encrypted by OTP key and are superior in content protection when contents redistribution. Since OTP use double-authentication elements in encryption process, this method is excellent in content protection. And it is very effective in cost aspect because it could be implemented by SW program. Another benefit is that we can shorten the development time period. In this paper, we propose and find its possibility as a new content protection and authentication method suitable for IPTV services.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.327-332
• /
• 2004

USB(Universal Serial Bus) is one of the most popular communication interfaces. When USB is used in an extended range, especially configurating In-home network by connecting multiple digital devices each other, USB interface uses the bandwidth in the way of TDM(Time Division Multiplexing) so that the bottleneck of bus bandwidth can be brought. In this paper, the more effective usage of bus bandwidth to overcome this situation is introduced. Basically, in order to realize the system for transferring realtime moving picture data among digital information devices, we analyze USB transfer types and Descriptors and introduce the method to upgrade detailed performance of Isochronous transfer that is one of USB transfer types. In the case that Configuration descriptor of a device has Interface descriptor that has two AlternateSetting, if Isochronous transfers are not processed smoothly due to excessive bus traffic, the application of the device changes AlternateSetting of the Interface descriptor and requires a new configuration by SetInterface() request. As a result of this adaptive configuration, the least data frame rate is guaranteed to a device that the sufficient bandwidth is not alloted. And if the bus traffic is normal, the algorithm to return to the original AlteranteSetting is introduced. this introduced method resolve the bottleneck of moving picture transfer that can occur in home network connected by multiple digital devices.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.286-296
• /
• 2010

The study of the development of DJ robots is to meet the demands of the music services which are changing very rapidly in the digital and network era. Existing studies, as a whole, develop music services on the premise of personalized environment and equipment, but the DJ robot is on the premise of the open space shared by the public. DJ robot gives priority to traditional space and music. Recently as the hospitality and demand for cultural contents of South Korea expand to worldwide, industrial use of the contents based on traditional or our unique characteristics is getting more and more. Meanwhile, the DJ robot is composed of a combination of two modules. One is to detect changes in the external environment and the other is to set the properties of the music by psychology, emotional engineering, etc. DJ robot detect the footprint of the temperature, humidity, illumination, wind, noise and other environmental factors measured, and will ensure the objectivity of the music source by repeated experiments and verification with human sensibility ergonomics based on Hevner Adjective Circle. DJ robot will change the soundscape of the traditional space being more beautiful and make the revival and prosperity of traditional music with the use of traditional music through BGM.

• The Journal of the Korea Contents Association
• /
• v.15 no.9
• /
• pp.403-410
• /
• 2015

Since 1970, MRI has greatly been developing in terms of strength of magnetic field, the number of receipt channels, and short time of examination. With the development of digital systems and wireless network, hospitals have also acquired, saved, and managed digital images taken by various kinds of medical imaging equipment. However, domestic universities fail to provide practice training course independently thanks to expensive practice equipment and high maintenance cost, and rely on clinical training. Therefore, this study developed a MR patient diagnosis program based on Windows PC to help out students before their working in clinical filed. The designed Relational Database of MRI Simulator is made up of seven tables according to functions and data characteristics. Regarding the designed patient information, each stepwise function was classified by the patient registration method in clinical field. In addition, on the assumption of the basic information for diagnosis, each setting and content were classified. The menu by execution step was arrayed on the left side for easy view. For patient registration, a patient's name, gender, unique ID, birth date, weight, and other types of basic information were entered, and the patient's posture and diagnosis direction were set up. In addition, the body regions for diagnosis and Pulse Sequence were listed for selection. Also, Protocol name and other additional factors were allowed to be entered. The final window was designed to check diagnosis images, patient information, and diagnosis conditions. By learning how to enter patient information and change diagnosis conditions in this program, users will be able to understand more theories and terms learned in practice and thereby to shorten their learning time in actual clinical work.

• Journal of the Korean Society for information Management
• /
• v.30 no.4
• /
• pp.215-239
• /
• 2013

Even though the overall scholarly community has recognized a dramatic growth and changes in the Information Science research in Korea over the last few decades, there are still only few studies that have identified the changes in terms of long-term and dynamic point of view. We have analyzed 1,007 IS-research articles from leading Korean journals in KCI (Korea Citation Index), published between 2000 and 2011. To discern the trendline of changes in research interests over time, we conducted a time-series analysis by developing grounded subject scheme from the article set and checking the growth rate of the number of published articles and title keywords. A comparative analysis was also conducted by constructing and comparing co-word maps over time to discover visible changes in research topics over this 12-year period of the IS-research in Korea. As a result, we identified some developments and transformations in major subject areas and knowledge structure of the IS-research in Korea over time. The major trend we discovered is that IS-studies over the 12-year period evolved from system-oriented research to library-application research. The changes are especially observed in knowledge management, Web-based system evaluation, and information retrieval areas. When compared to the results of other studies, the result of our study may serve as an evidence of the localization of Korean IS-studies in the first decade of the $21^{st}$ century.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.7
• /
• pp.307-314
• /
• 2017

Stick-PC is small and portable, So it can be used like a desktop if you connect it to a display device such as a monitor or TV anytime and anywhere. Accordingly, Stick-PC can related to various crimes, and various evidence may remain. Stick-PC uses the same Windows version of the operating system as the regular Desktop, the artifacts to be analyzed are the same. However, unlike the Desktop, it can be used as a meaningful information for forensic investigation if it is possible to identify the actual user and trace the usage by finding the traces of peripheral devices before analyzing the system due to the mobility. In this paper, We presents a method of collecting images using Bootable OS, which is one of the image collection methods of Stick-PC. In addition, we show how to analyze the trace of peripheral connection and network connection trace such as Display, Bluetooth through the registry and event log, and suggest the application method from the forensic point of view through experimental scenario.

• Journal of Internet Computing and Services
• /
• v.19 no.5
• /
• pp.1-11
• /
• 2018

The Blockchain is a technique that prevents data from being manipulated and guarantees the integrity and reliability of the data by all participants in the network jointly owning and validating the data. Since the Blockchain characterized by security, scalability and transparency, it is used in a variety of fields including logistics, distribution, IoT and healthcare, including remittance. In particular, there is a growing interest in smart contract that can create different forms of contracts and automate implementation based on Blockchain. Smart Contract can be used to pre-programme contracts and are implemented immediately when conditions are met. As a result, digital data can be more reliable. In this paper, we are conducting a study on the smart contract design as a way to solve such problems as illegal misuse of funds on virtual currency, which has become an issue recently. Through this process, we applied the customer identification and money laundering prevention process using smart contract, and then check the possibility of preventing money laundering and propose the ASM (AML SmartContract Mechant) design.

• Journal of the Korean Society for Library and Information Science
• /
• v.44 no.4
• /
• pp.249-276
• /
• 2010

With the rapid growth and development of information technology and the Internet, the amount of information published in electronic formats such as video, audio, digitalized text, etc. and the number of users accessing information online to satisfy their information needs are growing at a tremendous rate. This study analyzes standardized components to construct ERMS and proposes a model of ERMS based on the result of the analysis. The main functions of ERMS in university libraries are: 1) ERMS can manage and control access information to various electronic resources, metadata, holdings, user resources. Also, ERMS can be compatible with an existing library system such as IR(Information Retrieval) system, linking system, or proxy system. 2) ERMS should completely be compatible with acquisition and cataloging systems for effective management and control of integrated information organization and library budget. 3) ERMS should systematically and effectively manage license information on electronic resources. 4) ERMS should provide ideal and effective environment for use and access control of electronic resources in a library and integrated tool to manage and control all of electronic resources. Additionally, this study points out the need to organize committee groups to establish standardized rules and collaborative management of electronic resources among university libraries like DLF ERMI and redesign organizations in a library and a librarian's job description.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.118-124
• /
• 2008

For forward error correction, DVB-S2, which is the digital video broadcasting forward error coding and modulation standard for satellite television, uses a system based the concatenation of BCH with LDPC inner coding. In DVB-S2 the LDPC codes are defined for 11 different code rates, which means that a DVB-S2 LDPC decoder should support multiple code rates. Seven of the 11 code rates, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, and 9/10, are regular and the rest four code rates, 1/4, 1/3, 2/5, and 1/2, are irregular. In this paper we propose a flexible decoder for the regular LDPC codes. We combined the partially parallel decoding architecture that has the advantages in the chip size, the memory efficiency, and the processing rate with Benes network to implement a DVB-S2 LDPC decoder that can support multiple code rates with a block size of 64,800 and can configure the interconnection between the variable nodes and the check nodes according to the parity-check matrix. The proposed decoder runs correctly at the frequency of 200MHz enabling 193.2Mbps decoding throughput. The area of the proposed decoder is $16.261m^2$ and the power dissipation is 198mW at a power supply voltage of 1.5V.