• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.77-84
• /
• 2021

In this study, flexural tests of prestressed high strength spun concrete (PHC) piles reinforced with infilled concrete and longitudinal rebars were conducted, where the longitudinal rebar ratio and the presence of sludge formed on the inner surface of PHC pile were set as key test variables. A total of six PHC pile specimens were manufactured, and their flexural behaviors including failure mode, crack pattern, longitudinal strain distribution in a section and end slip between external PHC pile and infilled concrete were measured and discussed in detail. The test results revealed that the flexural stiffness and strength increased as the longitudinal rebar ratio became larger, and that the sludge formed on the inner surface of PHC pile did not show any detrimental effect on the flexural performance. In addition to the experimental approach, this study presents a nonlinear flexural analysis model considering compatibility conditions and strain and stress distributions of the PHC piles and infilled concrete. The rationality of the nonlinear flexural analysis model was verified by comparing it with test results, and it appeared that the proposed model well evaluated the flexural behavior of PHC piles reinforced with infilled concrete and longitudinal rebars with a good accuracy.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.2
• /
• pp.81-93
• /
• 2021

The purpose of this study was to analyze the image, perception, and preference type of high school students of Hanbok and examine the differences according to gender and participation in Hanbok classes. For this purpose, a survey was conducted with 438 high school students in Busan. Frequency analysis, chi-square test, t-test, and F-test were performed using the SPSS and the results were as follows. Firstly, for most high school students, Hanbok has an elegant image, but it was also confirmed that they perceive Hanbok to have a splendid image due to its exposure in mass media and SNS. The image of Hanbok differed by gender and participation in Hanbok classes. A higher percentage of male students than female students perceived Hanbok to have rustic image. Secondly, the type of hanbok that high school students prefer was traditional Hanbok, followed by fusion Hanbok, casual Hanbok, and fashion Hanbok. Hanbok preference type differed by gender and participation in classes. Group participating in hanbok classes showed a higher preference for fashion Hanbok than those who did not. Thirdly, high school students' perception of traditional Hanbok was above average. By subcomponents, it was shown in the order of 'esthetics', 'sustainability', and 'practicality'. It was found that there were statistically significant differences in traditional Hanbok perception according to gender and participation in Hanbok classes. Female students evaluated more positively for traditional Hanbok than male students and students who participate in Hanbok classes evaluated traditional Hanbok more positively than non-participating students.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.222-230
• /
• 2022

Digital technology is gradually expanding its field and has a great influence on various fields of dentistry. Recently in digital dentistry, the importance of superimposing various 3-dimensional (3D) image data is emerging, in order to utilize gathered data effectively for diagnosis and prosthesis fabrication. Integrating data from facial scans, intraoral scans, and mandibular movement recordings can create a virtual patient. A virtual patient is formed by integrating digital 3D diagnostic data such as intraoral and extraoral soft tissues, residual dentition, and dynamic occlusion, and the results of prosthetic treatment can be evaluated virtually. The patients in this case report were a 37-year-old female whose chief complaint is that the appearance of the existing prosthesis was distorted and a 55-year-old female patient whose anterior prosthesis needed to be refabricated after the endodontic treatment. 3D facial scans were obtained from each patient, and the patient's mandibular movements were recorded using ARCUS Digma 2 (KaVo Dental GmbH, Biberach an der Riss, Germany). The collected data were integrated on computer-aided design (CAD) software (Exocad dental CAD; exocad GmbH, Darmstadt, Germany) and transferred to a virtual articulator to create a digital virtual patient. The temporary fixed prostheses were designed, restored, and evaluated, and it was reflected into the final restorations. With the aid of the virtual dental patient, accuracy and predictability could be increased throughout treatment, simplifying the occlusal adjustment and clinical evaluation with improved esthetic outcomes.

• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.261-270
• /
• 2022

For mobile online games, this study examines how use pursuit propensity, use interest, use, service quality, and system quality, which are attributes that evaluate the use value and benefit for Chinese users, have an effect on use satisfaction. Empirical analysis results; all composing factors of four attribute had a positive effect, and the degree of effect was different according to game types in use interest and use, service quality. In terms of use pursuit, there was no difference between game types, and innovation pursuit and relationship pursuit were found to be similarly important effecting factors. In terms of use interest, there was a difference between game types. Sense of solidarity in single-player game and sense of achievement in multi-player game was found to be the most important effecting factor. In terms of service quality, there was a difference between game types. Easy of game in single-player game and function of game in multi-player game was the most important effecting factor. In terms of system quality, use convenience was found the most important effecting factor without difference between game types. Based on these results, this study suggested a strategy to enhance game development and loyalty to companies in the game industry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.320-329
• /
• 2022

Physiological wear of occlusal surface is inevitable throughout the lifetime, and considered to be normal. Pathologic wear, however, may cause fatal damage to the occlusal surface and destroy esthetics and proper anterior guidance. In such cases, rehabilitation of occlusal wear should be followed by thorough evaluation and diagnosis. In this present case, severe occlusal wear was found in the labial surfaces of mandibular anterior teeth and palatal surfaces of maxillary anterior teeth. Occlusal vertical dimension was evaluated and decided to be regained due to insufficient amount of restorative space. After determining new occlusal vertical dimension, diagnostic wax-up is usually performed to continue prosthodontic treatment. In this case with collapsed occlusion and loss of occlusal vertical dimension, conventional diagnostic wax-up was replaced with various digital devices. Diagnostic wax-up was digitally performed in the software and provisional prosthesis was fabricated with digital tools. With verification with provisional prosthesis, the entire dentition was rehabilitated with newly set occlusal vertical dimension and proper anterior guidance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.374-381
• /
• 2022

This case report introduces a 74-year-old male patient who visited retention deficiency of the mandibular implant overdenture, which was fabricated 20 years ago. When the existing dentures were used, the vertical dimension was reduced, the maxillary complete denture lacked lip support and retention, and the mandibular overdenture lacked clip retention due to damage to the bar attachment. After removing the damaged bar attachment, it was replaced with a ball attachment, and impressions were taken using the DENTCA^TM Tray and then the vertical dimension was measured. The gothic arch tracing was performed to record the centric relation. Obtained impressions were scanned and the shape of final dentures was designed using software and try-in dentures were fabricated using 3D printer. After evaluating the occlusal plane, occlusal relationship, facial shape, and pronunciation using the try-in dentures, the bite registration was recorded, and the final denture was manufactured based on this. The inner surface of the denture was adjusted and bilateral balanced occlusion was formed, and the housing was connected to the mandibular denture by a direct method. This case reports have shown satisfactory resultin recovering improved retention and esthetic outcome by increasing the vertical dimension and the lip support using CAD-CAM technique and the ball attachment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.509-516
• /
• 2021

This study investigated the effect of dietary supplementation with cysteamine hydrochloride (CSH) on the growth performance and nutrient digestibility of broilers. A total of 180 one-day-old male Ross broilers were allotted to one of the three treatment groups with three replications (20 birds per replication). The experimental groups were as follows: control group (basal diet), CSH-1 group (basal diet + 250 mg CSH/kg feed), and CSH-2 group (basal diet + 500 mg CSH/kg feed). During the grower period, feed intake, body weight, average daily gain, feed conversion ratio (FCR), and livability did not show any variation among the treatment groups. On the other hand, a comprehensive evaluation of the finisher period and the entire experiment period found that FCR was significantly improved in CSH-1 and CSH-2 groups as compared to the control group (p<0.05). The dietary supplementation of CSH did not affect the carcass and meat percent (breast and leg muscle). Although there was no significant difference, the digestibility of organic matter tended to be higher in the CSH-2 group than in the control group (p<0.1). This study suggests that a dietary supplement with 250-500 mg/kg CSH can be effective in improving FCR and the digestibility of organic matter in broilers.

• Science of Emotion and Sensibility
• /
• v.25 no.2
• /
• pp.71-78
• /
• 2022

This study investigates the recommendation for tax accounting services used in many companies. In particular, it aims to create guidelines for small businesses with fewer than 100 employees, which are relatively difficult to manage in terms of cost or time. We surveyed 100 corporate officials on basic business information, such as the number of employees, job titles, and business type, as well as the type of tax accounting service, the recommended score for the service, the reason for the score, and other opinions related to tax accounting services. In particular, the recommendation score seeks to obtain more effective results by using the Net Promoter Score method, which is known to be more effective in understanding customer opinions than general customer satisfaction surveys. The survey revealed a Net Promoter Score for a recommendation of -33 points, lower than the general Net Promoter Score. It also indicated that tax accounting services need improvement. Specifically, the opinions of the respondents who gave a non-recommendation score were as follows: "Not inconvenient or comfortable," "It was just okay," "I don't know if it would be helpful," and "There is no differentiation and there are no special alternatives." We concluded that an improved service for raising recommendation scores was necessary. This survey focused on recommendations for companies with fewer than 100 employees; future studies should incorporate larger companies and more variables.

• Science of Emotion and Sensibility
• /
• v.25 no.3
• /
• pp.3-14
• /
• 2022

With the increase of video conferencing users and the development of technology, the situations where video conferencing is used and the layout of video conferencing interfaces are diversifying. Social anxiety affects video conferencing communication and is closely related to the self-view function, which is characteristic of video conferencing. The self-view function is part of the video conferencing interface that provides a small preview of one's own camera feed. Self-view is known to degrade work performance and cause fatigue; however, it is set as the default function on video conferencing software in a way that users generally prefer. This study used an online survey to study the effect of task orientation, preferred self-view size, and social anxiety on video feedback preference. Participants responded to questions assessing work orientation, social anxiety level, preferred self-view size, and self-view preference. The results showed that preferred self-view size mediates task orientation and video feedback preference. There was no significant difference in the mediating effect of the preferred self-view size according to the degree of social anxiety. These results offer insights into the interactions between users and video conferencing software and provide information that can be useful for designing video conferencing interfaces.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.1
• /
• pp.22-30
• /
• 2023

Currently, almost all product development in the jewelry industry utilizes 3D CAD and 3D printing. In this situation, 3D CAD modeling and 3D printing ability units in colleges, Tomorrow Learning Card Education, and Course Evaluation-type jewelry design related education are conducted with developed curriculum based on the standards for training standards, training hours, training equipment, and practice materials presented by NCS. Accordingly, this study analyzes 3D CAD modeling and 3D printing training facilities, training hours, training equipment, etc into three categories of NCS precious metal processing and jewelry design, and studies the development of educational systems such as 3D CAD/3D printing curriculum and various environments that meet these standards. Education using this 3D CAD/3D printing education system will enable us to continuously supply professional talent with practical skills not only in the jewelry industry but also in the entire 3D CAD/3D printing manufacturing industry, which is called as one of the pillars of the 4th Industry. The quality of employment of trainees receiving education and the long-term retention rate after employed can also have a positive effect. In addition, excellent educational performance will help improve the recruitment rate of new students in jewelry jobs or manufacturing-related departments, which are difficult to recruit new students in recent years.