• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.697-698
• /
• 2013

최근에 유연한 성질을 갖는 전자기기들의 수요가 증가하면서, 그에 따라서 유연 전자기기를 뒷받침 해줄 수 있는 에너지 저장체의 유연한 성질도 중요성이 점점 부각되고 있으며 많은 연구가 진행되고 있다. 유연한 에너지 저장체의 많은 연구들이 유연한 금속 박막이나 특수 공정처리가 필요한 고분자를 이용하고 있으나, 대부분의 유연 에너지 소자들은 에너지 저장체의 성능에 비해 고온과 산 약품과 같은 환경이 필요하며, 비용과 시간이 많이 소모되고 있다. 그에 반해 섬유는 앞에서와 같이 특수 공정 처리가 따로 필요하지 않으며 상온에서도 손 쉽게 이용 가능하며, 신축성이 뛰어난 장점이 있기 때문에 효율적, 비용적으로 유연한 에너지 저장체에 유리한 소재이다. 몸에 해로운 산과 같은 약품처리의 필요도 없으며, 용매를 흡수하는 능력이 뛰어나기 때문에 용매를 이용한 도포 방법을 사용하면 다양한 물질을 폭넓게 적용 가능하다. 그리고 적용 분야에 맞춰서 섬유의 종류를 조절하면 다양한 성질을 갖는 천 기반의 에너지 저장체가 형성되며, 면 섬유가 수소 결합과 높은 반데르 발스 결합에 의해 탄소나노튜브와 결합하여 높은 에너지 밀도를 갖는 에너지 저장체를 형성하는 것을 분석한 논문들도 보고되고 있다. 면 섬유의 특수한 성질을 이용하여 에너지 저장체를 제작하고 이를 확인하기 위해서 일반 합성 섬유인 polyester와 면 섬유를 비교 제작하였으며, 용매의 형태로 손쉽게 도포 가능한 물질은 탄소 계열의 활물질들이며, 탄소 나노 튜브나 그래핀 등이 분산된 용액을 이용해 천에 도포 가능하다. 탄소 계열의 활물질들은 대표적인 슈퍼캐패시터 물질이며, 천에 도포를 함으로써 천 기반의 슈퍼캐패시터를 제작하였다. 일반 합성 섬유 polyester와 CNT를 결합한 형태의 전극은 최대 에너지 축전 용량(Maximum specific capacitance)이 53.6 F/g으로 나타났으며, 면 섬유와 CNT를 결합한 형태의 전극은 최대 에너지 축전 용량이 122.1 F/g으로 나타났다. 따라서 면 섬유에서 높은 에너지 저장 능력을 보이는 것을 실험적으로 확인하였으며, 에너지 저장 능력이 뛰어난 면 섬유를 다음 전극 디자인에서도 일률적으로 적용하였다. 슈도캐패시터의 대표적 물질인 금속 산화물인 망간 산화물(MnO2)을 3전극 도금 시스템을 이용하여 에너지 축전 용량과 에너지 밀도를 올리는 전극을 제작하였다. 특히 망간 산화물의 형태는 표면적을 극대화하기 위해서 평균 지름은 200~300 nm 정도 되는 나노 입자의 형태로 제작하였다. 그 결과, 확연하게 에너지 축전 용량이 향상되었으며, 최대 에너지 축전 용량은 282.0 F/g, 에너지전력 밀도는 14.2 Wh/kg으로 나타나서 금속 산화물의 형태가 주는 효과를 확인할 수 있었다. 하지만 나노 입자의 형태로 제작된 금속 산화물은 문제점이 발생하였다. 금속 산화물의 전기 전도성이 매우 낮기 때문에, 전기 전도성에 비례해서 전력 밀도의 값이 표현되는데, 전기 전도성이 급격히 감소하기 때문에 전력 밀도도 급격한 감소가 나타난다. 다음과 같이 전기 전도성 물질을 첨가하는 방법은 추가의 공정이 필요한 단점이 있지만 오직 기계적인 인장응력만을 가해서 에너지 밀도와 전력 밀도를 증가시키는 전극을 제작하였다. 인장응력을 섬유 기반의 전극에 가했을 시에 가닥들간의 접촉 증가와 CNT가 정렬되면서 특정 변형률(strain) 이전에서는 전기 전도성이 최대 50% 이상 증가하는 것을 확인할 수 있었으며, 선행 연구에서 보고되었다. 이를 이용해서 전기 전도성과 직결되는 전력 밀도의 양도 증가시키고 에너지 밀도의 증가 여부까지 확인한 결과 인장을 가하기 전 면 섬유의 전력 밀도와 에너지 밀도는 6.4 kW/kg and 6.1 Wh/kg으로 나타났으나 30% 변형 인장 후에는11.4 kW/kg과 7.1 Wh/kg으로 나타났다. 그리고 망간 산화물을 첨가한 전극 역시 4.9 kW/kg과 14.2 Wh/kg으로 나타났었으나 인장 이후 전력 밀도는 14.2 kW/kg, 에너지 밀도는 17.6 Wh/kg으로 확연하게 증가한 것을 확인하였다.

• Cartoon and Animation Studies
• /
• s.29
• /
• pp.37-60
• /
• 2012

This essay is discusses the phase on expression as experimental animation for the tendency of the animation which appeared newly 1960s in Japan by "3 members in animation". In general, experimental animation is contrary to traditional animation. "3 members in animation" tried to present the concept of animation newly with the various trials which overthrow the form of the conventional animated cartoon. Those days, the feature animation of Toei was the mainstream of the cartoon film. When comparing with Yoji Kuri's works, the movement and theme on expression are different. It can be said that the difference is an alternative method to the mainstream. Other members Ryohei Yanagihara and Hiroshi Manabe connected design and illustration with animation. The independent creators participated in the animation festival which "3 members in animation" held. They tried to create animation interchanging with other genres. It can be said that the intermediality seen in their work is trial which sets variegated the object of animation and it expands the possibility of the new animation. Their approach overthrew the traditional tendency and was able to call it experimental animation. Japanese experimental animation in 1960s is the historical starting point of recent independent animation which searched for art in which an original expression has been formed in Japan.

• The Journal of the Korea Contents Association
• /
• v.17 no.12
• /
• pp.11-24
• /
• 2017

The purpose of this study is to offer fundamental data which is necessary to improve a design for the general high school. For doing this, teachers' satisfaction about using spaces of high schools equipped with excellent facilities and with general facilities respectively was compared and analyzed. Selected schools for this study were 3 high schools with superior facilities and 3 high schools with general facilities, all of which have been built or renovated since 2010. Data were collected by doing a field survey, a literature survey, and a questionnaire survey. Data were analyzed by 4 ways: Reliability analysis about satisfaction of educational facilities, demographic analysis, regression analysis on overall satisfaction and the use of facilities, and t-test to verify the difference of satisfaction depending on schools. Findings showed that overall satisfaction was high in high schools with excellent facilities whereas it was low in high schools with general facilities. Also, in order to enhance overall satisfaction of facilities, it suggests that building and continuously maintaining a circular route and a walkway which do not have the concealed space should be necessary.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.23-31
• /
• 2015

With the expiration of main patent of printing method, public interest now has shifted to 3D printing. In this, it needs to shine a light on the negative effects, particularly in the socio-economic aspect of 3D printing. By analyzing the existing research findings, policy reports and press releases, the negative effects of 3D printing and its countermeasures were derived. The main drawbacks of 3D printing includes the following: It might cause 3D printing-related crimes(e.g. printed weapons, intellectual property infringement, etc.) and it poses a big threat to other related business sectors.(e.g. potential job loss in molding and medical equipments manufacturing industries) What's more, the nature of 3D printing that it is easy to operate attracts lots of people, which then leads to serious social and environmental problems-product liability, ethical issues, environmental pollution, and finally government's blindly excessive investment in 3D printing. To avoid such potential risks, the government should establish and enforce the institutional law, and guidelines. Government's rational investment decision is also inevitable for the short-term and long-term sustainability of 3D printing.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.149-154
• /
• 2018

This paper describes the fabrication and heat transfer property of 50 watts rated LED array module where multiple chips are mounted on chip-on-board type ceramic-metal hybrid substrate with high heat dissipation property for high power street and anti-explosive lighting system. The high heat transfer ceramic-metal hybrid substrate was fabricated by conformal coating of thick film glass-ceramic and silver pastes to form insulation and conductor layers, using thick film screen printing method on top of the high thermal conductivity aluminum alloy heat-spreading panel, then co-fired at $515^{\circ}C$. A comparative LED array module with the same configuration using epoxy resin based FR-4 PCB with thermalvia type was also fabricated, then the thermal properties were measured with multichannel temperature sensors and thermal resistance measuring system. As a result, the thermal resistance of the ceramic-metal hybrid substrate in the $4{\times}9$ type LEDs array module exhibited about one third to the value as that of FR-4 substrate, implying that at least triple performance of heat transfer property as that of FR-4 substrate was realized.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.3 s.151
• /
• pp.425-435
• /
• 2006

The Korean silk industry is facing challenges due to decreasing demand and intensified competition. To understand its current state and evaluate its competitiveness precisely, we have visited most of the leading silk firms in Jinju area. By questionnaire and in-depth interview, we investigated their operational problems. We found that most of the managers are understanding the necessity of the capabilities in design and material development, but they did not fully aware of the importance of operational flexibilities. Based on the results of the survey, suggestions that are necessary to restore the competitiveness of the Korean silk industry were proposed from industrial and corporate viewpoints.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.47-52
• /
• 2017

Recently, a great attention has been paid to the mechanical behavior of ITO (Indium Tin Oxide) film, which is widely used in current smart devices due to its excellent electrical properties and transparency. In this study, the reliability of ITO thin films on flexible substrates was investigated using bending test and bending fatigue test. According to the relative position of ITO and substrate, the experiment was conducted on both outer and inner bending conditions. Inner bending condition exhibited superior electrical stability compared to outer bending test. The electrical resistance during outer bending fatigue test significantly increased compared to that in the inner bending fatigue. The crack nucleation and propagation differs according to the stress state and they have a great influence on the electrical resistance. The crack morphologies were observed by scanning electron microscopy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.608-616
• /
• 1996

To propose the use of skipjack processing by-product(SPB) as a food material, the optimal condition for the production of the SPB hydrolysate through enzyme treatment was obtained using RSM(Response Surface Methodology). Among eight pretenses test, Pretense $P^{TM}$ was screened primarily on the aspect of production cost and taste of the product. The extent of autolysis accompanied by endogenous enzyme in the SPB was almost negligible as compared with that of Protense $P^{TM}$ treatment. The derived model equation was within the satisfiable range as indicated by coefficient of $determination(R^2=0.9460)$ and lack of fit(p>0.1) values. From the results of RSM and ridge analysis, the conditions favoring the higllest degree of hydrolysis were: PH 7.2, $51^{\circ}C,$ reaction time of 3.94 hr, substrate concentration of 33.3%, and enzym $e_strate ratio of 0.48%.48%.8%.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.6
• /
• pp.65-71
• /
• 2010

The aim of the study intends to investigate wearing practice of personal protective equipment for firefighter in gyeongnam province and to provide the base data for the safety and health of firefighter. The results of the study are as follows. The overall reliability of fire personal protection equipment has been investigated by 3.19 and an overall improvement in the personal protective equipment is needed. Firefighter showed such a low satisfaction leather fire boots(2.68), glove(2.67) and rubber fire boots(2.59) in personal protective equipment and rubber fire boots(2.75), glove(2.77) and leather fire boots(2.97) has been investigated by the state of the poor. For personal protective equipment, firefighters have been experiencing many difficulties on the fit and weight. To overcome this problem, it is necessary to be designed ergonomically and to develop high-performance, lightweight materials.

• The Journal of the Korea Contents Association
• /
• v.15 no.1
• /
• pp.308-315
• /
• 2015

The purpose of this study, using 3D printer, was tried to fabricate the short arm cast of mesh types that can be hygienic and adequate ventilation with a good radiography. We used the multi channel computed tomography (MDCT) with three dimension printer device of the fused deposition modeling (FDM) techniques. The material is used a degradable plastic (poly lactic acid, PLA). Three-dimensional images of the short arm were obtained in the MDCT and then make the three-dimensional volume rendering. Three dimension volume rendering of the short arm is implemented as a tomography obtained in MDCT. Virtual mesh type cast model was output as three-dimensional images is designed based on the three-dimensional images of the short arm. As a results, the cast output by 3D printers were able to obtain excellent radiograph images than the conventional cast, and then it can decreased itching with unsanitary, and can break down easily to the cast. In conclusion, the proposed virtual mesh type cast output by 3D printers could be used as a basis for future three-dimensional printing cast productions and offered help to patients in the real life.